Evaluation of Water Quality in the Chillán River (Central Chile) Using Physicochemical Parameters and a Modified Water Quality Index

The Chillán River in Central Chile plays a fundamental role in local society, as a source of irrigation and drinking water, and as a sink for urban wastewater. In order to characterize the spatial and temporal variability of surface water quality in the watershed, a Water Quality Index (WQI) was calculated from nine physicochemical parameters, periodically measured at 18 sampling sites (January–November 2000). The results indicated a good water quality in the upper and middle parts of the watershed. Downstream of the City of Chillán, water quality conditions were critical during the dry season, mainly due to the effects of the urban wastewater discharge. On the basis of the results from a Principal Component Analysis (PCA), modifications were introduced into the original WQI to reduce the costs associated with its implementation. WQI_DIR2 and WQI_DIR, which are both based on a laboratory analysis (Chemical Oxygen Demand) and three (pH, temperature and conductivity), respectively, four field measurements (pH, temperature, conductivity and Dissolved Oxygen), adequately reproduce the most important spatial and temporal variations observed with the original index. They are proposed as useful tools for monitoring global water quality trends in this and other, similar agricultural watersheds in the Chilean Central Valley. Possibilities and limitations for the application of the used methodology to watersheds in other parts of the world are discussed.     

Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

An integrated assessment model for cross-country pipelines

The cross-country petroleum pipelines are environmentally sensitive because they traverse through varied terrain covering crop fields, forests, rivers, populated areas, desert, hills and offshore. Any malfunction of these pipelines may cause devastating effect on the environment. Hence, the pipeline operators plan and design pipelines projects with sufficient consideration of environment and social aspects along with the technological alternatives. Traditionally, in project appraisal, optimum technical alternative is selected using financial analysis. Impact assessments (IA) are then carried out to justify the selection and subsequent statutory approval. However, the IAs often suggest alternative sites and/or alternate technology and implementation methodology, resulting in revision of entire technical and financial analysis. This study addresses the above issues by developing an integrated framework for project feasibility analysis with the application of analytic hierarchy process (AHP), a multiple attribute decision-making technique. The model considers technical analysis (TA), socioeconomic IA (SEIA) and environmental IA (EIA) in an integrated framework to select the best project from a few alternative feasible projects. Subsequent financial analysis then justifies the selection. The entire methodology has been explained here through a case application on cross-country petroleum pipeline project in India.     

测定总氮的影响因素探讨

针对水质中总氮测定时蒸馏水、消解剂和消化过程等影响因素进行了讨论,并提出了减小空白值的对策。     

博斯腾湖水质矿化度模型及预测研究

根据博斯腾湖１９８５～１９９５年水质监测数据和出入湖水量等水文数据观测值，采用水质扩散模型和盐量平衡关系推导出博斯腾湖大湖区（简称博湖）水质矿化度模型，并预测了几种情况下博湖水质矿化度及近几年变化趋势，分析了影响博湖水质矿化度的主要因素，为博湖的近期和远期环境保护规划、环境管理等提供科学依据．     

用密切值法评价沙湾荒漠区生态环境质量

利用多目标决策中的密切值法进行沙湾荒漠区生态环境综合评价。该方法简便、适用、且分辨率较高，对各监测点群的定量描述符合实际状况。     

基于耦合模型的安徽经济与环境协调发展分析

构建了经济发展与生态环境评价指标体系，选用耦合协调度模型计算2010—2019年安徽省不同区域经济发展与生态环境的耦合协调度，并采用灰色关联度法计算评价指标与耦合协调度的关联系数。研究结果表明：全省经济发展与生态环境的耦合协调度整体呈改善趋势，耦合协调度集中分布在0.393~0.765，基本处于良好协调或低水平协调阶段。全省不同区域的生态环境指数均大于经济发展指数。省会城市、沿江江南地区耦合协调度高于江淮之间和淮河以北地区。工业"三废"排放量、环境质量、环境污染治理力度是影响经济发展与生态环境耦合协调度的重要因素，建议通过改善这些方面进一步提升经济与环境的耦合协调度水平。     

解决对氨基二甲基苯胺光度法测定硫化物中的几个问题

介绍对氨基二甲基苯胺光度法测定硫化物方法中如何降低空白值,提高硫化钠溶液的稳定度以及提高酸化吹气回收率的原理和方法.     

应用模糊综合指数法对伊犁河（伊宁段）水质的综合评价

模糊数学法对伊犁河(伊宁段)水质进行综合评价时,由于分别采用地面水环境质量标准中五类标准值的平均值及其中三个标准值,计算后的结果不一致,而模糊综合指数法避免了这类问题的出现,计算结果比较满意.从而表明,该法是对模糊数学法的进一步改进.     

农业土壤危险废物污染的风险管理

从环境风险管理出发,探讨危险废物对农业土壤污染的途径,提出土壤危险废物污染的风险管理内容和方法,初步建立辽宁省农业土壤危险废物污染的预警指标体系。