白炭黑生产中干燥系统的噪声控制

对ＲＨＯＮＥ－ＰＯＵＬＥＮＣ白炭黑公司的干燥系统进行了噪声综合治理。主要措施有：大型引风机隔声罩、引风机排气筒消声塔,加热炉和鼓风机隔声机房,雾化加速器活动隔声罩,管道隔声包扎等。治理后厂界噪声由７４ｄＢ（Ａ）降至４５ｄＢ（Ａ）。     

Management strategy for acidic deposition in Western and Northern Canada

The governments of British Columbia, Alberta, Saskatchewan, Manitoba, Northwest Territories, and Canada held joint consultations in 1980 to review the available information on acid rain from Western and Northern Canada. It was concluded that acid rain might become a problem in the future and, hence, a research, monitoring, and management strategy for acidic deposition was needed. An overview of the joint governments' management strategy, organization of research and monitoring programs, and accomplishments to date are discussed in this article.The authors are members of the Technical Committee for the Long Range Transport of Atmospheric Pollutants (LRTAP)/Acid Deposition in Western and Northern Canada, and represent Alberta and British Columbia, respectively.     

ADVANCES IN THE BOUNDARY INTEGRAL EQUATION METHOD IN SUBSURFACE FLOW1

ABSTRACT: This paper explores some of the advances of the boundary element method, as applied to ground-water problems, during the last five years. Although the method is still somewhat limited compared to solution by finite elements, the range of solutions has increased considerably. Diffusion and advection-diffusion solutions are done efficiently. These include the incorporation of inhomogeneity, anisotropy, and nonlinear diffusion. The difficult problem of stream-aquifer interaction is an important application as it is much easier to follow a free surface with its multiple configurations. The application must be able to cycle between ground-water connection and disconnection with the stream and include seepage surfaces. Flow in fractured media is a natural application where the flow in fractures can usually be treated without a computational exception in spite of extremely high aspect ratios. The case of seawater intrusion forms a type of free surface problem and thus is a case for which the method has special advantages. For these and other applications the boundary element method provides an inexpensive technique for calculation where the data preparation and setup time is minimal. In most of these cases, programs can and have been written on microcomputers.     

重庆长寿地区垂直温度结构特征分析

本文根据在长寿地区进行的一系列大气边界层探空试验资料,分析了大气温度垂直结构特征以及与逆温有关的大气扩散条件。     

四川色达县切都柯沟“7.8”泥石流灾害特征及危险性分析

2004年7月8日四川色达县歌乐沱乡切都柯沟发生了中等规模泥石流,最大流速10.4m/s,洪峰流量156m3/s,冲出方量约7×104m3,造成了一定的财产损失。泥石流稠度大,冲击力强,具有明显的直进性特征,为粘性泥石流。切都柯沟泥石流发育阶段为壮年(偏幼)期。切都柯沟为中度危险的泥石流沟,该沟一次泥石流最大堆积危险范围39902m2,最大堆积长度284m,最大堆积厚度4.32m。提出了相应的防治措施:一是在滑坡崩塌处进行加固,采取沟岸护坡等措施;二是在沟谷上游修建谷坊、拦挡坝,以降低流速,削减泥石流能量和规模。     

CAUSES OF DUST DEVIL IN THE NORTHERN CHINA IN RECENT YEARS AND MEASURES FOR ITS PREVENTION & CONTROL

ＤｕｓｔｄｅｖｉｌｉｓａｆａｍｉｌｉａｒｗｅａｔｈｅｒｐｈｅｎｏｍｅｎｏｎｉｎｔｈｅｄｒｙａｎｄｄｅｓｅｒｔａｒｅａｓｉｎＮｏｒｔｈＣｈｉｎａ,ａｓａｆｏｒｍｏｆａｉｒ ｃａｒｒｉｅｄｓｏｉｌｍｏｖｅｍｅｎｔ.Ｉｔｉｓｖｅｒｙｄｅｓｔｒｕｃｔｉｖｅｔｏｔｈｅｅｃｏ ｅｎｖｉｒｏｎｍｅｎｔ.Ｒｅｃｅｎｔｓｔｕｄｙｈａｓｉｎｄｉｃａｔｅｄｔｈａｔａｌｔｈｏｕｇｈｔｈｅｎｕｍｂｅｒｏｆｄａｙｓｏｆｄｕｓｔｄｅｖｉｌａｔｔａｃｋｓｔｅｎｄｓｔｏｄｅｃｒｅａｓｅ,ｓｔｒｏｎｇａｎｄｅｘｔｒａｏｒｄｉｎａｒｉｌｙ…     

Improvements in Air Quality Modelling by Using Surface Boundary Layer Parameters derived from Satellite Land Cover Data

Many atmospheric dispersion models include only simpletreatment of surface features to estimate the wind profilesand stability parameters. Detailed characterisation of theland cover, particularly in large and complex urbanconurbations, is especially important, as the surfacefeatures can vary significantly over the area. This paperdiscusses the use of satellite land cover data to derivespatially resolved surface boundary layer (SBL) parameters.These parameters have been used in an air quality model,PEARL (Prediction Air Quality in Urban and RegionalLocations) for estimating monthly and annual COconcentrations. Land cover data, derived from LANDSATThematic Mapper Imagery, has been used to estimate SBLparameters (surface roughness length, albeedo, Bowen ratioand anthropogenic heat flux) for a study area of 10000km² encompassing Greater London and the surroundingcounties. The SBL parameters have been assigned according tomajor land cover types for the whole area at a spatialresolution of 1 × 1 km. Predictions from two versions of the PEARL model (one with land cover data and one without)have been compared with each other and with measured data forannual and monthly CO concentrations from seven London airquality monitoring sites. This comparison shows thatdifferences between predicted and observed values can bereduced by up to a factor of three. The use of SBLparameters derived from land cover data also yields moredetailed predicted annual CO spatial patterns especially inand around suburban areas. The performance of both versionsof the model for monthly CO concentrations has been comparedwith a range of statistical measures. This comparisonconfirms that improved agreement is observed betweenmodelled and measured monthly CO concentrations when use ismade of spatially resolved SBL parameters.     

汽车环境风洞地面区域流场数值仿真

目的 探究汽车环境风洞地面区域流场规律,获取风洞边界层抽吸装置的最佳抽吸率和底盘测功机对风洞地面区域边界层厚度、风速、总压和静压的影响规律,并比较MRF法和旋转壁面法对底盘测功机转毂转动模拟的精度。方法 运用计算流体动力学方法对汽车环境风洞流场进行数值仿真计算。结果 边界层抽吸装置对应于喷口风速120 km/h时的最佳抽吸率为0.048。底盘测功机区域总压呈现下降趋势。相比于存在底盘测功机,汽车环境风洞无底盘测功机时,底盘测功机区域内相同位置的边界层厚度会增加1.28～12.22 mm。在前转毂的前侧、上侧、后侧和后转毂的上侧和后侧会有一个高风速区域,区域内风速比设定风速高1%～4%,与无底盘测功机相比,区域内静压值低0.32～46.02 Pa。在前后转毂前侧和后侧与地面相连接的凹部会有一个低风速区域,区域内风速比设定风速低1%～5%,与无底盘测功机相比,区域内静压值高0.08～49.34 Pa。底盘测功机转毂的转动会使附近区域的地面边界层厚度变大。在前转毂前侧,采用旋转壁面法进行模拟比MRF法地面边界层厚度增加近8 mm,而在其他位置,2种模拟方法对边界层厚度的模拟差别在1.5 mm...     

旋风水膜除尘器的捕尘性能和结构设计

借助于Leith和Licht的边界层分离理论 ,对轴向出风旋风水膜除尘器的捕尘性能进行了分析 ,得出了捕尘效率的理论公式、径高比等无量纲准数     

海底悬跨管道表面双裂纹数值分析

为了研究海底油气管道多个裂纹间相互作用对管道产生的影响,针对海底悬跨管道表面双裂纹的相互作用,采用有限元方法建立双环向表面裂纹模型,采用围道积分法求解双裂纹下的应力强度因子,研究了不同边界条件下,不同尺寸裂纹间的相互影响规律,并对比了单裂纹下应力强度因子的变化情况。研究结果表明:不同尺寸的裂纹对双裂纹的相互影响规律有一定影响,且双裂纹应力强度因子最大值均出现在裂纹最深点处;弹簧边界下双裂纹相互影响规律与简单边界下相互影响规律明显不同;不同边界条件对悬跨管道双裂纹应力强度因子的影响较大。研究结果可为海底悬跨管道的失效分析提供参考依据。