重庆市大气污染对锌材料腐蚀的经济损失分析

简要介绍了材料大气腐蚀经济损失的估算方法,并以2002年为基准年,选择了重庆市主城中心的6个功能区作为代表性区域,运用腐蚀破坏剂量响应函数和使用寿命计算公式对锌材料的腐蚀经济损失进行了定量估算.结果表明,由大气污染腐蚀破坏锌材料造成的年直接经济损失约为4061.7万元,约为同期GDP的0.1%.其中,干沉降对经济损失总量的贡献率在71%～99%之间,均值为92%.     

柔性散粒材料静力及动力学性能实验研究

战场环境下单兵防常规炸弹爆炸抗震减震技术装备及器材,由于受经费投入、战场环境等因素影响,一直没有成功研制并得到装备.通过室内砂箱振动台震动模拟试验,测试了不同柔性散粒材料在震动条件下的加速度值,对其减震性能作了一些初步的探讨.通过研究,可以看到柔性散粒材料在隔震方面具有其他材料所不具有的优越性能,可以作为制造隔震器材的首选.     

纳米TiO2/CNTs复合材料的制备及其光学性质

TiO2在碳纳米管上的复合材料可以增加材料的光催化性能,已成为新的研究热点.本文采用低温液相法成功地合成了TiO2/CNTs复合材料,并用TEM、XRD和UV-vis对材料进行了表征,结果表明,TiO2很好地分散在CNTs上,具有显著的催化效果,有很好的应用前景.     

核电厂核事故应急疏散研究

根据我国法规、标准与美国核管委对核电厂核事故应急疏散的要求,考虑我国核电厂特殊的厂址条件与社会环境,分析核事故应急疏散的可行性。通过应急疏散行为研究、厂区的交通需求估计和路网分析,对不同情境,考虑核事故应急疏散的特殊问题,分别采用人工容量分析与宏观仿真模拟得到应急疏散时间。针对某核电厂,给出核事故应急疏散分析的一般步骤、方法与计算结果。对宏观仿真模型的主要参数进行灵敏度分析,找出影响应急疏散时间的主要因素,提出缩短应急疏散时间的针对性措施。     

Energy efficacy used to score organic refuse pretreatment processes for hydrogen anaerobic production

The production of hydrogen through Anaerobic Digestion (AD) has been investigated to verify the efficacy of several pretreatment processes. Three types of waste with different carbon structures have been tested to obtain an extensive representation of the behavior of the materials present in Organic Waste (OW). The following types of waste were selected: Sweet Product Residue (SPR), i.e., confectionary residue removed from the market after the expiration date, Organic Waste Market (OWM) refuse from a local fruit and vegetable market, and Coffee Seed Skin (CSS) waste from a coffee production plant. Several pretreatment processes have been applied, including physical, chemical, thermal, and ultrasonic processes and a combination of these processes. Two methods have been used for the SPR to remove the packaging, manual (SPR) and mechanical (SPRex). A pilot plant that is able to extrude the refuse to 200 atm was utilized. Two parameters have been used to score the different pretreatment processes: efficiency (ξ), which takes into account the amount of energy produced in the form of hydrogen compared with the available energy embedded in the refuse, and efficacy (η), which compares the efficiency obtained using the pretreated refuse with that obtained using the untreated refuse. The best result obtained for the SPR was the basic pretreatment, with η = 6.4, whereas the thermal basic pretreatment gave the highest value, η = 17.0 for SPRex. The best result for the OWM was obtained through a combination of basic/thermal pretreatments with η = 9.9; lastly, the CSS residue with ultrasonic pretreatment produced the highest quantity of hydrogen, η = 5.2.     

环境生物样品预处理中的微波溶样技术

微波溶样是近年产生的一种崭新的有前途的样品预处理技术，本文评述这一技术在环境、生物样品消解方面的近期应用。     

DESIGN OF DESALTING PLANTS FOR CONJUNCTIVE OPERATION1

ABSTRACT The selection of an evaporator design must reflect the balancing of captial cost (primarily in heat exchanger surface and vessels) against operating cost (primarily steam cost) to achieve minimum cost. In a conjunctive plant the tendency is to select a low-capital cost, high-operating cost plant. In addition, it is advantageous to use a high-capacity plant which needs to be operated much less of the time than a plant which is sized just at the needed rate. For example, in the study of a possible system to satisfy a future increase of 450 MGD in water supply to New York Qty, a plant of 750 MGD capacity was selected as optimum. This plant, of the advanced VTE-MSF process type, would have a performance ratio of 9 lb product/1000 Btu as compared to 10-13 normally used for base-loaded plants. Steam would be supplied by a multi-unit dual-purpose nuclear power plant. The most economical type of energy supply would be “interruptible”; the steam would be used by a low pressure turbine to generate electricity during periods of peak electrical demand but would be available to the desalting plant at other times. The low pressure turbine would be available as spinning reserve during desalting plant operation. It is estimated that the desalting plant would have a load factor of 27 per cent over its life.     

粉料无尘装车机工作原理及其在冶金厂矿的应用

介绍集装车与防尘统一于一体的无尘装车技术及具有设备本质安全化特点的无尘装车机在解决粉状物料装车作业时的扬尘问题,保护作业工人健康,维护厂区环境方面的重要优越性。     

战略导弹核武器系统人因工程应用研究

以战略导弹核武器系统的设计、生产、使用与维修为背景，分析了人为失误的定义、原因及分类，并根据模糊图理论，提出了一种评估人员可靠性的双向模糊图模型，并对人因工程学在战略导弹核武器系统的应用，提出了一些看法和建议。     

浅谈我国逆反射材料现状及其发展趋势展望

随着逆反射材料的广泛应用 ,其带来的安全警示效果、产品质量、生产工艺、检测方法及规范管理等方面的问题被日趋重视 ,笔者通过对逆反射材料的基本构造及反光特性的分析 ,论述了其对人和物的安全防护作用 ,并对我国目前逆反射材料的应用领域、产品质量及检测设备、检测标准等方面的问题进行探讨和评述 ,根据国内外的发展趋势 ,对我国开发及发展逆反射材料产业提出了笔者观点 ,为政府决策提供科学依据