兔子宫内膜蛋白等电聚焦电泳柱状胶与板状胶电泳效果的比较

哺乳动物早期胚胎发育过程中，胚泡附植的成功与否对早期胚胎的发育十分重要．为了有效地弄清胚泡附植的分子机制，本研究从分析蛋白质的一种生化技术-等电聚焦电泳着手，利用兔子宫内膜蛋白作为实验材料，探讨了柱状胶与板状胶等电聚焦电泳分离蛋白质的电泳效果．研究结果表明：在相同情况下，柱状胶与板状胶的蛋白质分布有一些差别，pH梯度分布也不一致；板状胶比柱状胶pH值分布宽、蛋白质谱带多、分辨率高；板状胶酸性端只有1—2cm没有蛋白带、蛋白带分布比较均匀且压得比较紧．这说明在用子宫内膜作为实验材料进行电泳时用板状胶进行电泳的结果较好．     

碳氮结构空心管材料及其对钍离子的吸附性能研究

目的合成碳氮结构空心管材料,用于稀土矿山开采中放射性钍离子的吸附去除,方法通过三聚氰胺和三聚氰酸超分子自组装,经水热碳化及高温热解,制备碳氮结构空心管材料.采用SEM、XRD等对材料进行表征.在不同热解温度和pH值下进行钍离子吸附实验,比较不同钍离子的初始浓度和吸附时间下吸附容量的差异.结果600℃时,材料形貌为均匀的中空管状结构;pH=3.5,热解温度为800℃时,材料最大吸附容量达到133.87 mg/g,吸附过程符合Langmuir等温吸附模型且遵从准二级动力学规律.结论碳氮结构空心管材料对钍离子具有良好的吸附效果,有望用于稀土开采过程中产生的放射性废钍离子的去除.     

天然气引射调峰系统的噪声形成及其治理研究

采用天然气引射调峰技术,能使上海某储配站10台天然气高压球罐的储气调峰能率提高68%,大大有助于解决天然气用气高峰时的供需平衡问题,并能节约初投资人民币1亿元.但使用超音速引射器后,当球罐压力下降到某一值时会产生高频噪声,影响管束区操作环境.本文分析了噪声产生的原因,提出了合理的噪声治理方案,并进行了方案的实施.实践证明:噪声治理效果良好,降低了管束区噪声污染,达到了国家"工业企业噪声卫生标准".     

环境公益诉讼原告的立法缺陷与完善

随着中国经济的迅速发展,许多侵害公众环境权益事件的频频发生,有些甚至造成了很大的社会影响和国际影响。建立环境公益诉讼制度迫切需要。但中国在环境公益诉讼原告的立法规定上存在缺陷,限制了环境公益诉讼的提起。应该赋予环境保护行政监督主管部门、检察机关、公民、环保社团的环境公益诉讼原告资格,通过环境公益诉讼原告资格的扩展,来维护我们公众的环境权益。     

Risk and characteristics analysis of the flow-induced vibration of the dip tube in opposed multi-burner gasifier

The vibration of dip tube in multi-burner gasifier changes the stress at the connection, causing flange seal failures and high temperature gas erosions with heavy economic losses and industrial accidents. This work aims to reveal the dip tube vibration mechanism, with special focus on obtaining the effect of operational parameters on the fatigue damage and long-term stable operation of gasifiers. A three-dimensional numerical simulation of the water-scrubbing cooling chamber was conducted to obtain the excitation source in the flow field. Then a FSI (fluid-structure interaction) transient dynamics simulation was carried out to investigate the vibration characteristics. Two major flow forms were found: a vertical annular flow near the dip tube outlet in the water-scrubbing cooling chamber; and a gas-liquid coupled flow caused by the syngas entrained the liquid. These two unstable multiphase flow forms exerted an energy excitation on the dip tube, resulting in a self-excited flutter. The dip tube vibration was similar to the first mode of a cantilever beam. The peak frequency was less affected by the initial liquid level and the syngas stream inlet velocity, which was close to its own first natural frequency. Note that, the alternating load generated by vibration may cause fatigue damage, which needs to be specifically considered in the design and manufacturing process of opposed multi-burner gasifier.     

Layered sphere-shaped TiO2 capped with gold nanoparticles on structural defects and their catalysis of formaldehyde oxidation

We describe here a one-step method for the synthesis of Au/TiO₂ nanosphere materials, which were formed by layered deposition of multiple anatase TiO₂ nanosheets. The Au nanoparticles were stabilized by structural defects in each TiO₂ nanosheet, including crystal steps and edges, thereby fixing the Au–TiO₂ perimeter interface. Reactant transfer occurred along the gaps between these TiO₂ nanosheet layers and in contact with catalytically active sites at the Au–TiO₂ interface. The doped Au induced the formation of oxygen vacancies in the Au–TiO₂ interface. Such vacancies are essential for generating active oxygen species (*O⁻) on the TiO₂ surface and Ti^3 + ions in bulk TiO₂. These ions can then form Ti^3 +–O⁻–Ti^4 + species, which are known to enhance the catalytic activity of formaldehyde (HCHO) oxidation. These studies on structural and oxygen vacancy defects in Au/TiO₂ samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.     

在役压力容器缺陷处理

介绍了在役压力容器常见缺陷以及它们的处理方法。     

基于ANSYS-PDS的含缺陷压力容器可靠性分析

为更准确地分析含缺陷压力容器的可靠性,提出采用ANSYS软件中的PDS模块建模求解,从本质上克服API 581压力容器可靠性分析的局限性,采用将压力容器的内径、原始壁厚、缺陷深度、压力容器内压设置为服从正态分布的随机变量的方法,基于响应面法结合蒙特卡洛法抽样分析,通过编写APDL代码,探讨含缺陷压力容器的可靠性.结果表...     

组合钢管混凝土式防屈曲支撑

由于河北省图书馆加固改造工程的实际需要,开发出了一种新型组合钢管混凝土式防屈曲支撑。该新型支撑解决了全钢型防屈曲支撑在大长度时难以满足稳定性的问题,而且比起传统钢管混凝土约束的防屈曲支撑,无需考虑内芯与混凝土之间的粘结力问题,加工过程简便、施工速度快,且质量容易控制。现已对此类新型支撑完成了短试件和足尺试件的拟静力滞回性能试验,试验结果表明,新型支撑的滞回曲线饱满稳定,整体稳定性和局部稳定性较好,满足工程要求。     

煤层瓦斯含量测定定点取样方法研究进展

基于文献调研及前期研究,分析了目前煤矿井下煤层瓦斯含量直接测定时所采用定点取样方法及其弊端,阐述了学者们提出的改进型定点取样方法,并对煤层瓦斯含量测定定点取样方法的研究进行了展望,指出:①取样过程瓦斯损失量小、取样时升温低、机械复杂度低是基于煤芯管法定点取样方法的发展方向;②开展煤储层条件下的瓦斯运移规律研究,建立并完善各种基于煤芯管法的定点取样方法的瓦斯损失量模型;③适用于松软煤层的定点取样方法的研发亟待开展;④基于负压气力输送理论的定点取样方法是定点取样方法研究的趋势,动态颗粒煤变负压瓦斯解吸规律是建立对应瓦斯损失量模型的基础研究。