Laboratory longitudinal diffusion tests: 2. Parameter estimation by inverse analysis

This study focuses on the verification of test interpretations for different state analyses of diffusion experiments. Part 1 of this study identified that steady, quasi-steady and equilibrium state analyses for the through- and in-diffusion tests with solution reservoirs are generally feasible where the tracer is not highly sorptive. In Part 2 we investigate parameter identifiability in transient-state analysis of reservoir concentration variation using a numerical approach. For increased generality, the analytical models, objective functions and Jacobian matrix necessary for inverse analysis of transient-state data are reformulated using unified dimensionless parameters. In these dimensionless forms, the number of unknown parameters is reduced and a single dimensionless parameter represents the sorption property. The dimensionless objective functions are evaluated for individual test methods and parameter identifiability is discussed in relation to the sorption property. The effects of multiple minima and measurement error on parameter identifiability are also investigated. The main findings are that inverse problems for inlet and outlet reservoir concentration analyses are generally unstable and well-posed, respectively. Where the tracer is sorptive, the inverse problem for the inlet reservoir concentration analysis may have multiple minima. When insufficient measurement data is collected, multiple solutions may result and this should be taken into consideration when inversely analyzing data including that of inlet reservoir concentration. Verification of test interpretation by cross-checking different state analyses is feasible where the tracer is not highly sorptive. In an actual experiment, test interpretation validity is demonstrated through consistency between theory and practice for different state analyses.     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

Three-Dimensional Modelling of Concentration Fluctuations in Complicated Geometry

The strong fluctuating component in the measured concentration time series of a dispersing gaseous pollutant in the atmospheric boundary layer, and the hazard level associated to short-term concentration levels, demonstrate the necessity of calculating the magnitude of turbulent fluctuations of concentration using computational simulation models. Moreover the computation of concentration fluctuations in cases of dispersion in realistic situations, such as built-up areas or street canyons, is of special practical interest for hazard assessment purposes. In this paper, the formulation and evaluation of a model for concentration fluctuations, based on a transport equation, are presented. The model is applicable in cases of complex geometry. It is included in the framework of a computational code, developed for simulating the dispersion of buoyant pollutants over complex geometries. The experimental data used for the model evaluation concerned the dispersion of a passive gas in a street canyon between 4 identical rectangular buildings performed in a wind tunnel. The experimental concentration fluctuations data have been derived from measured high frequency concentrations. The concentration fluctuations model is evaluated by comparing the model's predictions with the observations in the form of scatter plots, quantile-quantile plots, contour plots and statistical indices as the fractional bias, the geometrical mean variance and the factor-of-two percentage. From the above comparisons it is concluded that the overall model performance in the present complex geometry case is satisfactory. The discrepancies between model predictions and observations are attributed to inaccuracies in prescribing the actual wind tunnel boundary conditions to the computational code.     

低温浓缩-气相色谱/质谱法分析固定污染源废气中的丙烯腈

建立了固定污染源废气中丙烯腈的气袋采样-低温浓缩-气相色谱/质谱分析方法。结果表明,该法在丙烯腈质量浓度16.1~4 050μg/m~3范围内具有良好的线性,相关系数R~20.999,检出限为9.54μg/m~3,回收率、日内与日间精密度均符合质控要求,能够满足废气中丙烯腈分析的要求。     

燃煤电厂在线监测系统颗粒物浓度排放系数影响因素的探讨

选取上海市7家未安装气-气换热器的国控燃煤电厂作为研究对象,从煤质、除尘器、脱硫协同脱除作用以及锅炉工况负荷等方面探讨对颗粒物浓度排放系数 K值产生的影响,得出上述因素通过改变脱硫进口颗粒物浓度值影响 K值,当脱硫进口颗粒物浓度较低、波动范围较小时,其 K值也维持相对稳定的状态;当脱硫进口颗粒物浓度较高、波动范围较大时,其 K值也会发生较大的变化等结论。     

Evidence of new particle formation during post monsoon season over a high-altitude site of the Western Ghats,India

The formation of ultrafine particles, their growth, and associated characteristic features has been studied during new particle formation events over a high-altitude station of the Western Ghats during the 2014 post-monsoon season. Most of the events were observed during noon time where particle bursts in the nucleation-mode size range from 5 to 25 nm followed by sustained growth in size. This phenomenon persists for ～4–8 h with a growth rate of 1–2 nm h^–1. Peak concentrations of nucleation-mode particles during the event generally vary from 2300 to 5000 cm^–3. The mean growth rate is 1.4 ± 0.42 nm h^–1, particle formation rate is 1.14 ± 0.22 cm^–3 s^–1, coagulation sink is 0.35 ± 0.22 cm^–3 s^–1, and condensational sink is 15.4 ± 2.6?×?10^–3 s^–1. All these values are comparable with earlier results from Indian region. Comparison of size-segregated particle number concentration during days of new particle formation events and those without new particle formation were carried out showing a distinct variation in nucleation and Aitken mode with least variability associated with the accumulation mode.     

地下停车库空气污染物排放实测研究

通过对上海市某商业地下停车库库内及排风管道的连续监测,获得了CO、NO、非甲烷总烃(NMHC)、PM10等空气污染物浓度数据。结果表明:(1)地下停车库的休息日车流量明显大于工作日,且工作日小时车流与车位比为20%~50%、休息日小时车流与车位比为20%~80%。(2)总体上,地下停车库内CO、NO、NMHC浓度呈明显变化规律,营业时间现峰值,非营业时间现谷值;地下停车库内CO、NO、NMHC变化规律和车库排风中具有较好的一致性。(3)车库排风中污染物浓度水平均低于地下停车库内。(4)营业时间的CO、NO、NMHC小时浓度平均值明显增大,约为非营业时间的2.42~3.67倍。(5)单车次CO、NOX、NMHC排放量最大值分别为0.855、0.070、0.214g/(辆·次)。(6)营业时间,除地下停车库内CO外,NO、PM10的8h时间加权平均值符合《工作场所有害因素职业接触限值化学有害因素》(GBZ 2.1—2007,其中未规定NMHC)中时间加权平均容许浓度(PC-TWA);地下停车库内CO出现33.3%的超标频率,最大占标率104%。     

Wild tomato leaf extracts for spider mite and cowpea aphid control

Glandular trichomes on the leaves of wild tomato, L. hirsutum f. hirsutum Mull, also known as Solanum habrochaites (Solanaceae), synthesize and accumulate high levels of methyl ketones (MKs). L. hirsutum accession LA 407, having high concentration of MKs, was grown from seeds under greenhouse conditions. Four MKs (2-undecanone, 2-dodecanone, 2-tridecanone, and 2-pentadecanone) were screened for their toxicity to spider mites, Tetranychus urticae Koch and cowpea aphids, Aphis craccivora Koch. The objectives of this investigation were to: (1) develop a bioassay for testing MKs on spider mite and cowpea aphid mortality and (2) compare the efficacies of wild tomato leaf crude extracts and pure standard materials of MKs against spider mite and cowpea aphid mortality. Our results revealed that spider mites are most sensitive to 2-tridecanone (LC₅₀ = 0.08 μmole cm^?2 of treated leaf surface) and least sensitive to 2-undecanone (LC₅₀ = 1.5 μmole cm^?2 of treated leaf surface) 4 h after treatment. Similarly, 2-tridecanone caused greatest mortality (LC₅₀ = 0.2 μmole cm^?2 of treated leaf surface), whereas 2-undecanone caused the lowest morality (LC₅₀ = 0.48 μmole cm^?2 of treated surface) of cowpea aphid. We concluded that all MKs tested in this investigation are toxic to spider mites and aphids. 2-Tridecanone is more effective in killing mites and aphids compared to other MKs. Toxicity of crude extracts, prepared from the leaves of L. hirsutum accession LA 407, to spider mites and cowpea aphids revealed greater mortality compared to a combined mixture of MKs standard material (used at the same concentration as found on LA 407 leaves). This indicates that in addition to MKs, other unidentified compounds in LA 407 leaf extract also have pesticidal properties. Accordingly, leaf extracts of LA 407 could be explored in crop protection, and they might open a new area of MK formulations and discovery of biorational alternatives for pest control in agricultural fields.     

光催化氧化处理低浓度含醇废水实验

室内实验了TiO2紫外光催化氧化处理废水中的低浓度甲醇。通过对TiO2催化剂活性及添加方式、溶液pH、紫外光强与催化剂加量等参数优化,在TiO2加入浓度为300mg/L和120 W紫外灯照射条件下,对6.8L甲醇浓度为2.77%的低浓度含醇废水持续处理70min后,废水中的甲醇去除率可达98.31%。该实验为进一步处理低浓度含醇废水提供了方法依据。     

采油用油田化学剂对鱼类的急性毒性实验研究

以白鲢鱼为实验生物,采用半静态实验方法,研究了几种油田化学剂的半致死浓度和安全浓度。研究表明:防膨剂、杀菌剂K、杀菌剂L、清蜡剂、四氟硼酸、酸化缓蚀剂、阻垢剂、阻垢缓蚀剂、缓蚀阻垢剂和破乳剂的96h半致死浓度LC50值分别为0.68、1.6、9.3、25、123、510、620、3240、4570、7410mg/L。根据化学物质对鱼类毒性物质分级标准,防膨剂属于剧毒物质;杀菌剂K、杀菌剂L和清蜡剂属于高毒物质;四氟硼酸、酸化缓蚀剂和阻垢剂属于中毒物质;阻垢缓蚀剂、缓蚀阻垢剂和破乳剂属于低毒物质。这几种油田化学剂的安全浓度为0.068～741mg/L。此研究可为评价油田化学剂对水生生物的影响,制定废水排放浓度标准提供依据。