Effects of calibration on L-THIA GIS runoff and pollutant estimation

Urbanization can result in alteration of a watershed's hydrologic response and water quality. To simulate hydrologic and water quality impacts of land use changes, the Long-Term Hydrologic Impact Assessment (L-THIA) system has been used. The L-THIA system estimates pollutant loading based on direct runoff quantity and land use based pollutant coefficients. The accurate estimation of direct runoff is important in assessing water quality impacts of land use changes. An automated program was developed to calibrate the L-THIA model using the millions of curve number (CN) combinations associated with land uses and hydrologic soil groups. L-THIA calibration for the Little Eagle Creek (LEC) watershed near Indianapolis, Indiana was performed using land use data for 1991 and daily rainfall data for six months of 1991 (January 1-June 30) to minimize errors associated with use of different temporal land use data and rainfall data. For the calibration period, the Nash-Sutcliffe coefficient was 0.60 for estimated and observed direct runoff. The calibrated CN values were used for validation of the model for the same year (July 1-December 31), and the Nash-Sutcliffe coefficient was 0.60 for estimated and observed direct runoff. The Nash-Sutcliffe coefficient was 0.52 for January 1, 1991 to December 31, 1991 using uncalibrated CN values. As shown in this study, the use of better input parameters for the L-THIA model can improve accuracy. The effects on direct runoff and pollutant estimation of the calibrated CN values in the L-THIA model were investigated for the LEC. Following calibration, the estimated average annual direct runoff for the LEC watershed increased by 34%, total nitrogen by 24%, total phosphorus by 22%, and total lead by 43%. This study demonstrates that the L-THIA model should be calibrated and validated prior to application in a particular watershed to more accurately assess the effects of land use changes on hydrology and water quality.     

Leaching of styrene and other aromatic compounds in drinking water from PS bottles

Bottled water may not be safer, or healthier, than tap water. The present studies have proved that styrene and some other aromatic compounds leach continuously from polystyrene （PS） bottles used locally for packaging. Water sapmles in contact with PS were extracted by a preconcentration technique called as ＂purge and trap＂ and analysed by gas chromatograph-mass spectrometer （GC/MS）. Eleven aromatic compounds were identified in these studies. Maximum concentration of styrene in PS bottles was 29.5 μg/L. Apart from styrene, ethyl benzene, toluene and benzene were also quantified but their concentrations were much less than WHO guide line values. All other compounds were in traces. Quality of plastic and storage time were the major factor in leaching of styrene. Concentration of styrene was increased to 69.53 μg/L after one-year storage. In Styrofoam and PS cups studies, hot water was found to be contaminated with styrene and other aromatic compounds. It was observed that temperature played a major role in the leaching of styrene monomer from Styrofoam cups. Paper cups were found to be safe for hot drinks.     

Impacts of converting from leaded to unleaded gasoline on ambient lead concentrations in Jakarta metropolitan area

Total suspended particulate mater （TSP） concentrations were monitored for one year from July 2000 and for one year from April 2003 in Jakarta City. Thirteen elemental TSP components, aluminum （Al）, sodium （Na）, iron （Fe）, lead （Pb）, potassium （K）, zinc （Zn）, titanium （Ti）, manganese （Mn）, bromine （Br）, copper （Cu）, chromium （Cr）, nickel （Ni）, and vanadium （V） were analyzed by a sequential X-ray fluorescence spectrometer. Al, Na, Fe, K, and Pb were major components at most of the sampling locations in 2000. However, only Pb in 2003 dramatically decreased to one tenth. The phase-out of leaded gasoline began on July 1, 2001 in Jakarta City and lead content in gasoline decreased to one tenth, too. The decrease in Pb concentration was a result of the phase-out of leaded gasoline, as lead emissions mainly are exhaust gas from vehicles.     

Toxicity assessing for chlorpyrifos-contaminated soil with three different earthworm test methods

Earthworm toxicity tests are useful tools for terrestrial risk assessment but require a hierarchy of test designs that differ in effect levels (behavior, sublethal, lethal). In this study, the toxicity of chlorpyrifos contaminated soil on earthworms was assessed. In addition to the acute and chronic tests, an avoidance response test was applied. Earthworms were exposed to sublethal and lethal concentration of chlorpyrifos, and evaluated for acute toxicity, growth, fecundity and avoidance response after a certain exposure period. The test methods covered all important ecological relevant endpoints (acute, chronic, behavioral). Concentration of 78.91 mg/kg, chlorpyrifos caused significant toxic effects in all test methods, but at lower test concentrations, only significant chronic toxic effects could be observed. In the present study, chlorpyrifos had adverse effect on growth and fecundity in earthworm exposed to 5 mg/kg chlorpyrifos after eight weeks. The avoidance response test, however, showed significant repellent effects concentration of 40 mg/kg chlorpyrifos. For chlorpyrifos, concentration affecting avoidance response was far greater than growth and fecundity, it seemed likely that earthworms were not able to escape from pesticide-contaminated soil into the clean soil in field and hence were exposed continuously to elevated concentrations of pesticides.     

An experimental apparatus for testing biodiesels based on a CFR engine—setup and validation with different methyl ester blends

A cooperative fuel research (CFR) engine was modified and instrumented in order to control operating conditions and to measure engine parameters and in-cylinder pressure diagrams. Aiming at the comparison of different alternative fuels, an experimental procedure was defined, including cetane number (CN) evaluation and the definition of engine operating quantities in different working points, for fixed levels of compression ratio (CR) and injection advance. An investigation was made considering several blends of methyl-esters of rapeseed oil (RME) and of a mix of vegetable oils (VOME) with conventional diesel oil. The defined experimental procedure was applied to assess CN, engine brake thermal efficiency (bte) and exhaust emissions. Results show that the biodiesel content has a positive influence on soot emissions, with strong reduction, while thermal efficiency and NO_X emissions are negatively affected, which can be justified taking into account fuel properties and changes in combustion process. As observed outcomes are generally in line with those presented in literature, the facility proved to be a suitable tool for basic investigations on alternative fuels to be used in specific applications.     

基于地面监测数据的2013~2015年长三角地区PM2.5时空特征

近年来,长三角地区灰霾天气持续增多,空气细颗粒物污染问题日益突出。基于2013年1月至2015年5月长三角地区及周边缓冲区内共214个空气质量监测站点PM_2.5逐时监测数据,运用普通克里金插值方法,从年、季、月尺度上分析了PM_2.5的空间分布格局和时间动态变化。结果表明:(1)2 a来,长三角地区PM_2.5浓度空间分布明显呈现整体北部高南部低,局部地区略有突出的分布特征;长三角地区PM_2.5浓度年均值为57.08μg/m³;其中,江苏省PM_2.5的年均值为三省市最高,为65.84μg/m³;其次为上海市,年均值为53.87μg/m³;浙江省PM_2.5的年均值较小,为51.53μg/m³。(2)从季节尺度分析,长三角地区PM_2.5浓度变化表现出冬春季高,夏秋季低的变化趋势;这与区域内冬季风向来源、降水稀少、气象扩散条件差有着密切的关系; (3)长三角地区月浓度变化大致呈U形分布; 12月份PM_2.5浓度最高; 3月份以后, PM_2.5浓度开始呈逐步下降趋势;在5~9月份,区域PM_2.5处于"U"字的谷底,其中6月份夏收时期秸秆焚烧、气象等因素导致PM_2.5浓度有略微升高;进入10月份后迅速攀升,且11、12月份呈现持续升高态势。     

近50年鄱阳湖五大流域降水变化特征研究

基于鄱阳湖流域在江西省内部分对应的79县市气象站1960～2006年逐日降水观测资料,采用线性回归的方法分别研究五大流域的年降水量、降水日数、暴雨日数等3要素的变化趋势,并用Mann法进行了变化趋势的显著性检验,用距平与均方差之比达到15和20作为气候异常检验指标,对各流域的各时间序列进行了异常检验,采用了Mann Kendall法对各时间序列进行突变检测。结果表明：（1）各流域的年降水量变化趋势基本一致,年降水量与年暴雨日数密切相关;饶河流域强降水事件较多,降水强度大,赣江中游流域降水时间分布相对较均匀,强降水事件较少;（2）各流域年降水量、暴雨日数总体呈波动上升趋势,20世纪90年代以来暴雨日数异常偏多的概率最大;（3）年降水日数以20世纪80年代中期为界,之前呈波动上升趋势,之后呈波动下降趋势,2002年至今各流域降雨日数明显偏少;（4）各流域的年降水量、降水日数、暴雨日数均未出现趋势性的突变;（5）近50年来鄱阳湖流域降水时间分布不均的情况加剧,旱涝灾害风险增加。     

Americium,plutonium and uranium contamination and speciation in well waters,streams and atomic lakes in the Sarzhal region of the Semipalatinsk Nuclear Test Site,Kazakhstan

New data are reported on the concentrations, isotopic composition and speciation of americium, plutonium and uranium in surface and ground waters in the Sarzhal region of the Semipalatinsk Test Site, and an adjacent area including the settlement of Sarzhal. The data relate to filtered water and suspended particulate from (a) streams originating in the Degelen Mountains, (b) the Tel′kem 1 and Tel′kem 2 atomic craters, and (c) wells on farms located within the study area and at Sarzhal. The measurements show that ²⁴¹Am, ^239,240Pu and ²³⁸U concentrations in well waters within the study area are in the range 0.04–87 mBq dm⁻³, 0.7–99 mBq dm⁻³, and 74–213 mBq dm⁻³, respectively, and for ²⁴¹Am and ^239,240Pu are elevated above the levels expected solely on the basis of global fallout. Concentrations in streams sourced in the Degelen Mountains are similar, while concentrations in the two water-filled atomic craters are somewhat higher. Suspended particulate concentrations in well waters vary considerably, though median values are very low, at 0.01 mBq dm⁻³, 0.08 mBq dm⁻³ and 0.32 mBq dm⁻³ for ²⁴¹Am, ^239,240Pu and ²³⁸U, respectively. The ²³⁵U/²³⁸U isotopic ratio in almost all well and stream waters is slightly elevated above the ‘best estimate’ value for natural uranium worldwide, suggesting that some of the uranium in these waters is of test-site provenance. Redox analysis shows that on average most of the plutonium present in the microfiltered fraction of these waters is in a chemically reduced form (mean 69%; 95% confidence interval 53–85%). In the case of the atomic craters, the proportion is even higher. As expected, all of the americium present appears to be in a reduced form. Calculations suggest that annual committed effective doses to individual adults arising from the daily ingestion of these well waters are in the range 11–42 μSv (mean 21 μSv). Presently, the ground water feeding these wells would not appear to be contaminated with radioactivity from past underground testing in the Degelen Mountains or from the Tel′kem explosions.     

Sorption of alkylphenols on Ebro River sediments: comparing isotherms with field observations in river water and sediments

This study reports sorption isotherms of the endocrine disruptors nonylphenol (NP) and octylphenol (OP) in three sediment samples from the Ebro River basin (NE Spain), with organic carbon fractions (f_OC) ranging from 0.0035 to 0.082 g_OC g⁻¹. All isotherms were fitted to the Freundlich model with slightly nonlinear exponents ranging from 0.80 to 0.94. The solubility of the compounds as well as the organic carbon (OC) content had the strongest influences on the sorption behavior of these compounds. Comparison of the laboratory-spiked samples with the native contamination of NP of 45 water and concurrent sediment samples resulted in reasonable matches between both data sets, even though the lowest concentrations in the field were not completely reached in laboratory tests. This good agreement indicates that sorption laboratory data can be extrapolated to environmental levels and therefore the distribution of nonylphenol between sediments and water can be predicted with a precision of one order of magnitude. Furthermore, laboratory experiments with simultaneous loading of NP and OP revealed negligible competition for sorption sites at low concentrations.     

An imprecise fuzzy risk approach for water quality management of a river system

Uncertainty plays an important role in water quality management problems. The major sources of uncertainty in a water quality management problem are the random nature of hydrologic variables and imprecision (fuzziness) associated with goals of the dischargers and pollution control agencies (PCA). Many Waste Load Allocation (WLA) problems are solved by considering these two sources of uncertainty. Apart from randomness and fuzziness, missing data in the time series of a hydrologic variable may result in additional uncertainty due to partial ignorance. These uncertainties render the input parameters as imprecise parameters in water quality decision making. In this paper an Imprecise Fuzzy Waste Load Allocation Model (IFWLAM) is developed for water quality management of a river system subject to uncertainty arising from partial ignorance. In a WLA problem, both randomness and imprecision can be addressed simultaneously by fuzzy risk of low water quality. A methodology is developed for the computation of imprecise fuzzy risk of low water quality, when the parameters are characterized by uncertainty due to partial ignorance. A Monte-Carlo simulation is performed to evaluate the imprecise fuzzy risk of low water quality by considering the input variables as imprecise. Fuzzy multiobjective optimization is used to formulate the multiobjective model. The model developed is based on a fuzzy multiobjective optimization problem with max–min as the operator. This usually does not result in a unique solution but gives multiple solutions. Two optimization models are developed to capture all the decision alternatives or multiple solutions. The objective of the two optimization models is to obtain a range of fractional removal levels for the dischargers, such that the resultant fuzzy risk will be within acceptable limits. Specification of a range for fractional removal levels enhances flexibility in decision making. The methodology is demonstrated with a case study of the Tunga–Bhadra river system in India.