OPEN CHANNEL INTERPOLATION OF CROSS SECTIONAL PROPERTIES1

ABSTRACT: This paper confirms the use of interpolated data to refine water surface profiles. Sources of error within these computations are due to truncation error, inaccuracies in geometric data, and improper modeling. Confirmation includes the development of an equation that models the effect of data measurement error on the computed water surface profile. A review of interpolation procedures includes a proposed method based upon geometric properties.     

CRITICAL EVALUATION OF CERTAIN METHODS OF UNSTEADY GROUNDWATER HYDRAULICS1

The basic theories and fundamental assumptions usually employed in the solution of unsteady groundwater flow problems are reviewed critically. The best known method of analysis for such problems is based on the Dupuit-Forchheimer approximation and leads to a nonlinear parabolic differential equation which is generally solved by linearization or numerical methods. The accuracy of the solution to this equation can be improved by use of a different approach which does not employ the Dupuit Forchheimer assumption, but rather is based on a semi-numerical solution of the Laplace equation for quasi-steady conditions. The actual unsteady process is replaced by a sequence of steady-state conditions, and it is assumed that the actual unsteady flow characteristics during a short time interval can be approximated by those associated with “average” steady state flow. The Laplace equation is solved by a semi-discretization method according to which the horizontal coordinate is divided into subintervals, while the vertical coordinate is maintained continuous. The proposed method is applied to a typical tile drainage problem, and, based on a comparison of calculated results with experimental data, the method is evaluated and practical conclusions regarding its applicability are advanced.     

呼和浩特强对流天气的数值模拟分析

利用三维积云数值模式模拟了呼和浩特地区强对流天气的发展过程，并结合实时雷达回波资料进行了对比分析，指出模式输出的部分物理量与理论值、雷达回波或地面天气及降雹（水）实况符合得较好。从对模式输出的几个物理量的统计分析，得出利用三维积云数值模式预测强冰雹过程的概念模型。结果表明，三维积云数值模式能用于模拟对流云特别是强对流云的发展过程，可在人工影响天气业务工作中应用并不断发展。     

火灾模拟结果误差分析的函数分析法

火灾试验结果和模拟预测结果常能表达成关于时间变化的曲线,为定量描述两种随时间变化曲线间相符合的程度,引入误差分析的函数分析法。采用适合于低Mach数流修正的N-S方程描述烟气的输运过程,使用大涡模拟和Smagorinsky亚格子模型,对封闭空间内的火灾过程进行数值模拟;对其计算结果的分析表明,函数分析法能定量对模拟预测曲线与试验曲线间的差别进行描述,模是两曲线值大小的相对误差的度量,余弦是两曲线形状相似程度的度量。     

化学事故救援方舱舱室环境安全性模拟研究

运用计算流体动力学(CFD)方法,对具有超压防护功能的某化学事故应急救援手术方舱室内气体污染物运动扩散的规律以及对人员安全的影响进行了数值模拟,其研究结果表明:当大气环境中氢氰酸(HCN)浓度为5mg/L时,前10s从常规进风口进入舱室的HCN在滤毒通风装置开启后,随气流运动逐渐向整个舱室扩散,经净化空气的混合稀释作用,绝大部分通过舱体缝隙排出舱室,30min内舱室HCN浓度的总量下降了95.1%,说明超压防护很好地保证了舱室环境的安全性。     

旋转风幕流场的数值模拟及实验研究

基于流体力学中空气射流理论,建立气幕旋风排风罩流场的三维数学模型。影响气幕旋风排风罩效果的因素很多,主要包括:射流气动参数、吹吸气动参数以及流动空间的边界条件和装置结构等。针对不同送风速度、不同送风角度下两种情况进行分析,并利用FLUENT计算动力学软件对这两种情况下气幕旋风排风罩的流场进行了数值模拟,经过比较确定出最佳效果时的参数,并利用示综烟雾进行了实验。结果表明:所建立的气幕旋风排风罩流场的数学模型完全正确,所确定的最佳效果时的参数和实际情况基本一致,可用于工程实际。     

Modeling Pre‐ and Post‐Dam Removal Sediment Dynamics: The Kalamazoo River,Michigan1

Abstract:  The state of Michigan is interested in removing two low‐head dams in an 8.8 km reach of the Kalamazoo River between Plainwell and Otsego, Michigan, while minimizing impacts locally and to downstream reaches. The study was designed to evaluate the erosion, transport, and deposition of sediments over a 37.3‐year period using the channel evolution model CONCEPTS for three simulation scenarios: Dams In (DI), Dams Out (DO), and Design (D). The total mass of sediment emanating from the channel boundary, for the DI case, shows net deposition of 4,100 T/y for the study reach, with net transport (suspended and bed load) of 10,500 T/y passing the downstream boundary. For the DO case, net erosion is 19,200 T/y with net transport of 30,100 T/y (187% increase) passing the downstream boundary. For the D case, net deposition is 2,570 T/y (37% decrease) with transport of 14,200 T/y (35% increase) passing the downstream boundary. The most significant findings were: (1) removal of the low‐head dams will cause significant erosion of sediments stored behind the dams and increased sediment loads passing the downstream boundary and (2) sediment loads for the proposed channel design are similar to existing conditions and offer reduced fine‐sediment loadings.     

风对定日镜影响的计算流体动力学数值模拟

利用linux系统下软件平台Fluent 6.3的并行计算技术和实用的结构网格划分方法,基于Reynolds 时均方程,分别采用两种湍流封闭模型:标准k-ε和MMK修正的k-ε模型,模拟计算了定日镜结构的平均风压系数、阻力、升力以及力矩系数和平均风流场.分析了定日镜镜体平均风压、平均风流场的分布规律和特点;并将数值计算结果与风洞试验进行了比较.结果表明,基于Fluent 6.3的MMK修正的k-ε模型较之标准k-ε模型有更好的预测效果.     

基于数值模拟的公交车火灾发展过程及特性研究

采用数值模拟方法研究典型型号公交车的火灾发展过程,探讨车门打开对火情发展和人员逃生的影响.通过描述火源、公交车的结构及其内饰物的属性,研究车厢内关键位置的温度分布、能见度及CO和O2体积分数的变化规律,以揭示公交车的火灾发展、烟气运动过程及对人员安全逃生的影响.结果表明:车门打开后由于供氧充足,明显加速了火势的蔓延和烟气扩散,并使得燃烧温度显著提高;打开车门后20 s内,车门附近能见度和O2体积分数显著增高,CO体积分数有所降低,是乘客逃生的关键时间.     

带压开采陷落柱突水影响因素数值模拟

为研究承压水压与煤层陷落柱位置这两种因素对陷落柱突水的影响,在分析固流耦合数学模型的基础上,利用数值模拟软件FLAC3D,以双柳矿地质条件为背景,分别对3 MPa和5 MPa承压水压下开采上、下两组煤4种情况进行模拟,分析陷落柱及其周边围岩的渗流-塑性破坏耦合场、应力场和位移场的变化.结果表明:随着工作面推进至接近陷落柱,工作面前方集中应力场与柱体周边应力场发生耦合,并出现应力集中,当水压为5 MPa开采上组煤时应力集中系数最大,最容易形成突水危险区域;当上组煤工作面距离陷落柱为30 m时,陷落柱渗流场与集中应力场开始连通,在开采下组煤时这一距离比上组煤扩大15 ～ 20 m;煤层底板随工作面推进发生压缩-膨胀周期变化,引起拉伸、剪切破坏.