Life cycle assessment of waste paper management: The importance of technology data and system boundaries in assessing recycling and incineration

The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing on global warming potentials. The consequence of choosing a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate was studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved biomass, in order to study the importance of the system boundary choices. For recycling, the choice of virgin paper manufacturing data is most important, but the results show that also the impacts from the reprocessing technologies fluctuate greatly. For the overall results the choice of the technology data is of importance when comparing recycling including virgin paper substitution with incineration including energy substitution. Combining an environmentally high or low performing recycling technology with an environmentally high or low performing incineration technology can give quite different results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system to include substitution of fossil fuel energy by production of energy from the saved biomass associated with recycling will give a completely different result. In this case recycling is always more beneficial than incineration, thus increased recycling is desirable. Expanding the system to include forestry was shown to have a minor effect on the results. As assessments are often performed with a set choice of data and a set recycling rate, it is questionable how useful the results from this kind of LCA are for a policy maker. The high significance of the system boundary choices stresses the importance of scientific discussion on how to best address system analysis of recycling, for paper and other recyclable materials.     

The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.     

Experimental investigation of a 250-kW turbine organic Rankine cycle system for low-grade waste heat recovery

An organic Rankine cycle (ORC) is generally used for converting low-grade heat into electricity. In this study, an extensive literature survey was conducted to identify current research gaps on experimental ORC systems. Specifically, there is limited experimental data and limited details on thermal and expander efficiencies of ORC systems. In order to address these gaps, the objective of this study included developing a turbine ORC with a power output exceeding 50 kW and thermal efficiency exceeding 8% for a heat source temperature < 120°C. The experimental results indicated that the system achieved a net power output of 242.5 kW and a thermal efficiency of 8.3% (the highest value for a turbine ORC system for the heat source temperature below 120°C). Thus, the study addressed the gaps identified in the research area of ORCs.     

Coupling of the Water Cycle with Patterns of Urban Growth in the Baltimore Metropolitan Region,United States

Regional municipal water plans typically do not recognize complex coupling patterns or that increased withdrawals in one location can result in changes in water availability in others. We investigated the interaction between urban growth and water availability in the Baltimore metropolitan region where urban growth has occurred beyond the reaches of municipal water systems into areas that rely on wells in low‐productivity Piedmont aquifers. We used the urban growth model SLEUTH and the hydrologic model ParFlow.CLM to evaluate this interaction with urban growth scenarios in 2007 and 2030. We found decreasing groundwater availability outside of the municipal water service area. Within the municipal service area we found zones of increasing storage resulting from increased urban growth, where reduced vegetation cover dominated the effect of urbanization on the hydrologic cycle. We also found areas of decreasing storage, where expanding impervious surfaces played a larger role. Although the magnitude of urban growth and change in water availability for the simulation period were generally small, there was considerable spatial heterogeneity of changes in subsurface storage. This suggests that there are locally concentrated areas of groundwater sensitivity to urban growth where water shortages could occur or where drying up of headwater streams would be more likely. The simulation approach presented here could be used to identify early warning indicators of future risk.     

Biological complexity confounds the separation of point- and non-point sources of human impact on the natural world

Identifying process from pattern is one of the most vexing tasks inenvironmental monitoring. Given information on the distribution of speciesin a pre-defined area, together with comprehensive data on how environmentalconditions in that area have altered through time, is it possible toidentify the factors controlling the species‘ layout? Here, the practicalsignificance of this quandary is demonstrated using a series ofenvironmentally-degraded coastal lagoons in New South Wales. The TuggerahLakes (33°17′S,151°30′E) have over the last 50 yearsexperienced significant changes in species‘ distributions. Seagrasses,macroalgae, phytoplankton, molluscs, prawns and the jellyfish Catostylus mosaicus have altered in spatial pattern. Two human activitieshave been blamed for these perturbations: (1) agricultural clearance ofnative vegetation from the catchment, with associated input of top-soil andnutrients; (2) the commissioning of a coal-fired power station in 1967, withmassive uptake and recirculation of lake water for cooling purposes. In thispaper, spatial changes in macrophyte distributions over the last 50 yearsare reviewed in an attempt to identify the true source(s) of perturbation.The model adopted assumes that the power station is a point source of impactwhile nutrient inputs from the catchment are a diffuse source of impact;changes in species distributions can hypothetically be related back to thesesources according to whether they are localised or widespread. However,after a comprehensive analysis of available macrophyte data derived frominterviews, aerial photography and line transect methodologyies theconclusion is reached that changes in biogeographical pattern around theTuggerah Lakes cannot be attributed to specific anthropogenic pressures atanything beyond the coarsest of levels. This is considered to be the normfor most coastal management situations where natural background variation(’noise‘) and the complexity of linkages between physical, chemical andbiological components confounds the identification of causal relationships.The practical implications of this conclusion are discussed in the contextof litigation and remedial management design. Emphasis is placed on theneed to adopt an adaptive approach to estuarine management, incorporatingexplicit recognition of the limitations of available data, and to developnew techniques for identifying cause-effect relationships.     

模拟车用工况下5kW燃料电池尾气净化系统

模拟了车用工况下燃料电池发动机脉冲式排氢的特点,设计开发了一套质子交换膜燃料电池的尾气净化系统,并以5 kW燃料电池的尾气排放为例,研究其净化效果。研究了电池阳极排放氢气缓冲前后尾气中氢气浓度的变化,以及不同空速条件下氢气的去除效果。结果表明：电堆阳极排放氢气经过缓冲处理后,尾气中氢气浓度趋于平稳,大部分工况下处在2%以下,达到了安全处理的要求;尾气中氢气的去除效果与空速密切相关。对自制的整体式催化剂而言,当空速低于20000 h^-1时,氢气的去除率能达到约95%,而当空速达到39270 h^-1时,氢气的去除率仅为10.9%。鉴于这一问题,提出通过采用尾排空气的分流手段调整催化燃烧反应器对空速的要求,以提高尾气中氢气的去除率。     

Telomere length in workers was effected by omethoate exposure and interaction between smoking and p21 polymorphisms

Abstract

Omethoate is an organophosphorus pesticide that poses a major health hazard, especially DNA damage. The purpose of this study was to investigate the factors affecting telomere length in workers exposed to omethoate by analyzing the interaction between cell cycle gene polymorphism and environmental factors. The exposure group consisted of 118 workers exposed to omethoate for 8–10?years, the control group comprised 115 healthy people without occupational toxicant exposure history. The telomere length of genomic DNA from peripheral blood leucocyte was determined with real-time PCR. Polymerase chain reaction and restriction fragment length polymorphism was used to detect the polymorphisms in p53, p21 and MDM2 gene. The telomere length in the (CA?+?AA) genotypes for p21 rs1801270 polymorphism was longer than that in the CC genotype in control group (P?=?0.015). The generalized linear model analysis indicated the interaction of the p21 rs1801270 polymorphic (CA?+?AA) genotypes and smoking has a significant effect on telomere length (β = ?0.258, P?=?0.085). The prolongation of telomere length in omethoate-exposed workers was associated with genotypes (CA?+?AA) of p21 rs1801270, and interactions of (CA?+?AA) genotypes and smoking factor.     

人工湿地构筑根孔作用下土壤物质分布状况

嘉兴市石臼漾湿地应用人工构筑根孔技术,以玉米秸秆和油菜秸秆按比例混合埋植于土壤亚表层,作为湿地的基质/填料。在湿地运行一年半后,按照正交设计表,以埋植秸秆的种类(S)、填埋的土壤层次(L)、距离秸秆外环的远近(D)和秸秆周围土壤的表观颜色(C)作为实验因素,对秸秆周围养分物质浓度、土壤酶活性以及铁含量进行采样分析。实验结果显示:玉米秸秆和油菜秸秆腐烂较充分,分别形成较发达的粗根孔和细根孔;根孔周围土壤呈中度还原状态;粗根孔具有较强的优先流效应,其周围土壤具有较高的养分物质含量和较低的Fe2+/Fe3+比。粗根孔周围土壤具有较高的磷酸酶活性,而细根孔周围具有较高的β-葡糖苷酶活性和脲酶活性。综合比较,人工湿地构建初期,径级较大秸秆腐烂后形成的粗根孔发挥着更高的水分传导效率和更强的物质截留效应。     

需求视角的中国能源消费氮氧化物排放研究

基于经济投入产出生命周期评价(EIO-LCA)模型构建了中国1990—2010年能源消费氮氧化物完全排放矩阵,从需求的角度分析了氮氧化物排放在部门和不同需求间的分布结构,并通过情景模拟深入探讨了最终需求结构变化对氮氧化物排放的综合影响和拉动效应,以期探索中国氮氧化物减排的多元化途径.研究结果显示,1990—2010年中国氮氧化物排放总量从878万t上升到2398万t,历年来由工业部门拉动产生的氮氧化物占总量的比重高达70%左右;由最终消费拉动的氮氧化物排放比重逐年下降,资本形成和出口拉动的氮氧化物排放比重逐年上升.氮氧化物排放强度则从47.0 kg·万元-1降至6.0 kg·万元-1,其中,能源和交通部门的排放强度最高.通过情景模拟可以看出,提高最终消费比重,扩大内需有利于氮氧化物总量减排,尤其是对工业部门的减排效果显著.实现氮氧化物总量减排目标,要求在技术进步之外,积极寻求多元减排措施,以强化减排效果,突出能源和交通等重点部门的氮氧化物防治体系建设,并通过扩大内需优化最终需求结构以促进工业部门氮氧化物减排.     

Software as a bridge between theory and practice in life cycle assessment

Three mutually dependent elements are required for the application of life cycle assessment: methodology, data and software. Obviously, the design of software is determined by the methodology and the type of data available. Conversely, the development of software dictates the way in which data should be collected and recorded, and improves the theoretical framework, as it forces one to state the principles clearly and unambiguously. The influence of the development of software on both data and methodology is addressed and illustrated by examples, with reference to two key terms: transparency and explicitness. Three types of influence are distinguished: the design of a protocol, the formulation in terms of recipes, and the presentation of data.