EU Directive,ICNIRP Guidelines and Polish Legislation on Electromagnetic Fields

This review describes the general provisions of and the philosophy behind European Directive 2004/40/EC and ICNIRP (International Commission on Non-Ionizing Radiation Protection) guidelines. As an example of national legislation on the protection of workers against excessive electromagnetic field exposure, regulations established in Poland are summarized. The problems of a practical implementation of the Directive’s provisions are discussed.     

Attributes of Occupational Injury Among Workers in the Chemical Industry and Safety Issues

Case-study research was carried out with a view to find the attributes of occupational injury among workers in the chemical industry and to enhance safety issues. Injury data were collected and processed in terms of different variables, such as age, gender, skills, type of hazard, etc. Pareto analysis was then applied to find a pattern of occupational injury among the workers. The study revealed that 79.52% of the injured workers were in the 40–59 age group; 57.14% of accidents occurred during the 1st shift; 73.26% of accidents caused injury to hands, feet, chest to thigh, arms and eyes; and 70.93% of injuries were caused by pumps, carrying and lifting, vehicles, pipelines, valves, and grinding. Surprisingly, no one was injured in the group of temporary workers. The paper also provides specific suggestions followed by some action plans.     

A Fuzzy Model for Assessing Risk of Occupational Safety in the Processing Industry

Abstract

Managing occupational safety in any kind of industry, especially in processing, is very important and complex. This paper develops a new method for occupational risk assessment in the presence of uncertainties. Uncertain values of hazardous factors and consequence frequencies are described with linguistic expressions defined by a safety management team. They are modeled with fuzzy sets. Consequence severities depend on current hazardous factors, and their values are calculated with the proposed procedure. The proposed model is tested with real-life data from fruit processing firms in Central Serbia.     

Occupational Cognitive Failures and Safety Performance in the Workplace

Introduction. The majority of industrial accidents occur because of human errors. Human error has different causes, however, in all cases cognitive abilities and limitations of human play an important role. Occupational cognitive failures are cognitively-based human errors that occur at work. The aim of this study was to examine the relationship between occupational cognitive failures and safety consequences. Method. Personnel of a large industrial company in Iran filled out an occupational cognitive failure questionnaire (OCFQ) and answered questions on accidents. Univariate and multiple logistic regression analysis were used to determine the relationship between cognitive failures and safety consequences. Results. According to developed regression models, personnel with a high rate of cognitive failure, in comparison to low rate, have a high risk of minor injury involvement (OR 5.1, 95% CI [2.62, 10.3]); similar results were for major injury and near miss. Discussion. The results of this study revealed usefulness of the OCFQ as a tool of predicting safety-related consequences and planning preventive actions.     

Applying Hierarchical Loglinear Models to Nonfatal Underground Coal Mine Accidents for Safety Management

Underground mining is considered to be one of the most dangerous industries and mining remains the most hazardous occupation. Categorical analysis of accident records may present valuable information for preventing accidents. In this study, hierarchical loglinear analysis was applied to occupational injuries that occurred in an underground coal mine. The main factors affecting the accidents were defined as occupation, area, reason, accident time and part of body affected. By considering subfactors of the main factors, multiway contingency tables were prepared and, thus, the probabilities that might affect nonfatal injuries were investigated. At the end of the study, important accident risk factors and job groups with a high probability of being exposed to those risk factors were determined. This article presents important information on decreasing the number accidents in underground coal mines.     

The determinants of employee participation in occupational health and safety management

This article focuses on employee direct participation in occupational health and safety (OHS) management. The article explains what determines employee opportunities to participate in OHS management. The explanatory framework focuses on safety culture and safety management at workplaces. The framework is empirically tested using Estonian cross-sectional, multilevel data of organizations and their employees. The analysis indicates that differences in employee participation in OHS management in the Estonian case could be explained by differences in OHS management practices rather than differences in safety culture. This indicates that throughout the institutional change and shift to the European model of employment relations system, change in management practices has preceded changes in safety culture which according to theoretical argument is supposed to follow culture change.     

Investigation of work-related musculoskeletal disorders among male kitchen workers in South India

Objective. This study aims to quantify the prevalence of work-related musculoskeletal disorders (MSDs) and risks among male kitchen workers in the catering industry. Method. Data were collected with the help of the Nordic musculoskeletal questionnaire and by direct observations. Results. In total, 114 male kitchen workers from various hostels of a college in South India were considered for this study. The average age and mean years of employment of the workers are 26.4 (SD 7.7) and 7.8 respectively. The statistical analysis carried out reveals that 67.5% of male kitchen workers reported MSDs during the past 12 months. The highest prevalence rate has been found in the lower back (65.8%) and shoulder region (62.3%). Among different categories of kitchen work analyzed, it is evident that chief cooks suffer more from MSDs (79.2%) than assistant cooks (74.3%) and kitchen aides (30.0%). Workers in the older group, i.e., ≥41 years, and workers with 6–10 years of experience suffer with higher risk of MSDs, i.e., 93.9% and 87.5%, respectively. Conclusion. The male kitchen workers who participated in this research were found to possess both MSDs and ergonomic hazards.     

Occupational hazards to health of port workers

Objectives. The aim of this article is to reduce the risk of occupational hazards and improve safety conditions by enhancing hazard knowledge and identification as well as improving safety behavior for freight port enterprises. Methods. In the article, occupational hazards to health and their prevention measures of freight port enterprises have been summarized through a lot of occupational health evaluation work, experience and understanding. Results. Workers of freight port enterprises confront an equally wide variety of chemical, physical and psychological hazards in production technology, production environment and the course of labor. Such health hazards have been identified, the risks evaluated, the dangers to health notified and effective prevention measures which should be put in place to ensure the health of the port workers summarized. Discussion. There is still a long way to go for the freight port enterprises to prevent and control the occupational hazards. Except for occupational hazards and their prevention measures, other factors that influence the health of port workers should also be paid attention to, such as age, work history, gender, contraindication and even the occurrence and development rules of occupational hazards in current production conditions.     

Experimental analysis of radiographer exposure to the static field from a 1.5-T magnetic resonance imaging machine

Introduction. This study measures the exposure of occupational therapists from a 1.5-T magnetic resonance imaging (MRI) machine. Method. A total of 14 time-series on each of the chest, head and hand were taken before and after different MRI procedures. The peak values were noted in each case together with an average of all data recorded in the time-series. Results. The highest exposure recorded was observed on the hand, followed by the head and the chest. The overall maximum exposure (1479.40?mT) recorded was observed on the hand during a change of coil. It was also observed that the recorded exposure of experienced radiographers working in the MRI environment was less than that of junior staff due to different practices. Conclusion. This study is of significant importance in Malta since it is the first conducted in a MRI environment, especially because the results were compared with limits imposed by EU Directive 2013/35/EU which has to be implemented by July 2016.     

Analysis of underlying causes of investigated loss of containment incidents in Dutch Seveso plants using the Storybuilder method

In the Netherlands there are around 400 “Seveso” sites that fall under the Dutch Major Hazards Decree (BRZO) 1999. Between 2006 and 2010 the Dutch Labour Inspectorate's Directorate for Major Hazard Control completed investigations of 118 loss of containment incidents involving hazardous substances from this group. On the basis of investigation reports the incidents were entered in a tailor-made tool called Storybuilder developed for the Dutch Ministry of Social Affairs and Employment for identifying the dominant patterns of technical safety barrier failures, barrier task failures and underlying management causes associated with the resulting loss of control events. The model is a bow-tie structure with six lines of defence, three on either side of the central loss of containment event. In the first line of defence, failures in the safety barriers leading to loss of control events were primarily equipment condition failures, pre start-up and safeguarding failures and process deviations such as pressure and flow failures. These deviations, which should have been recovered while still within the safe envelope of operation, were missed primarily because of inadequate indication signals that the deviations have occurred. Through failures of subsequent lines of defence they are developing into serious incidents. Overall, task failures are principally failures to provide adequate technical safety barriers and failures to operate provided barriers appropriately. Underlying management delivery failures were mainly found in equipment specifications and provisions, procedures and competence. The competence delivery system is especially important for identifying equipment condition, equipment isolation for maintenance, pre-start-up status and process deviations. Human errors associated with operating barriers were identified in fifty per cent of cases, were mostly mistakes and feature primarily in failure to prevent deviations and subsequently recover them. Loss of control associated with loss of containment was primarily due to the containment being bypassed (72% of incidents) and less to material strength failures (28%). Transfer pipework, connections in process plant and relief valves are the most frequent release points and the dominant release material is extremely flammable. It is concluded that the analysis of a large number of incidents in Storybuilder can support the quantification of underlying causes and provide evidence of where the weak points exist in major hazard control in the prevention of major accidents.