老化过程中铜形态变化的X射线吸收精细结构谱的(XAFS)初步研究

利用X射线吸收精细结构谱(XAFS)对老化过程中土壤中铜的分子形态进行初步表征。以硫酸铜、氧化铜和硫化铜的X射线吸收扩展边结构(EXAFS)谱为参比,对土壤样品中Cu的EXAFS谱进行拟合,得到不同老化阶段与参比物质相对应的结合态Cu的百分含量,并与连续提取法表征进行比较。XAFS分析结果表明,老化阶段土壤样品中铜的主要结合形态是CuSO_4,同时还有部分CuS,基本不含有CuO。随着时间的推移,土壤中CuSO_4百分含量呈现出下降的趋势,CuS百分含量呈现出上升的趋势。这与连续提取法研究结果中其可交换态的百分比下降,残渣态上升的趋势相似。     

Comprehensive health condition assessment on partial sewers in a southern Chinese city based on fuzzy mathematic methods

A self-developed sewer health assessment system using the fuzzy comprehensive evaluation and analytical hierarchy process was applied to give a comprehensive health condition evaluation on part of the local sewers in a southern Chinese city based on the sewer video data collected by a sewer inspection closed circuit television （CCTV） robot. Aside from the overall condition evaluation, the structure, function, and stability status of the sewer were also analyzed using the method. A comprehensive index H was proposed to give the overall health condition of pipes with different defects, and Ht, Hs, and If were used to quantify the defects affecting the tightness, stability, and function of the pipe, respectively. Results show that 48% of the inspected pipes were in good condition （0〈H〈0.25）, and about 33% of the sewer pipes analyzed were categorized to be at severe or urgent condition levels （H 〉 0.5）, although most of the pipes were installed only within five years. Frequent sedimentation affects the function of the sewer, and deformation and joint damage affect the structure of the sewer.     

Comparative study on the efficiency and environmental impact of two methods of utilizing polyvinyl chloride waste based on life cycle assessments

Two processes of utilizing polyvinyl chloride （PVC） waste, an incineration process and a vacuum pyrolysis process, for energy conversion were compared to determine their efficiency and environmental perfor- mance. We carried out a life cycle assessment with each of the two processes to evaluate their environmental impact and defined the goals and limits of our remit. As well, we established an inventory of PVC waste from incineration and vacuum pyrolysis based on process analysis, data collection and calculations. The results show that electrical power output per unit mass of PVC waste in the incineration process was twice as high as that of the vacuum pyrolysis process. Incineration had a larger total environmental impact potential than vacuum pyrolysis. The total environmental impact potential of PVC waste from incineration was three times higher than that from vacuum pyrolysis. Incineration of PVC disposed 300 ng. 100 kgI of dioxins and vacuum pyrolysis 98.19 ng- 100 kgI of dioxins. As well, we analyzed the data for their uncertainty with results quantified in terms of three uncertainties： basic uncertainty, additional uncertainty, and computational uncertainty. The coefficients of variation of the data were less than 25% and the quality of the inventory data was acceptable with low uncertainty. Both PVC waste disposal processes were of similar quality and their results comparable. The results of our life cycle impact assessment （LCIA） showed considerable reliability of our methodology. Overall, the vacuum pyrolysis process has a number advantages and greater potential for development of PVC disposal than the incineration process.     

A new fault detection method for non-Gaussian process based on robust independent component analysis

Conventional fault detection method based on fast independent component analysis (FastICA) is sensitive to outliers in the modeling data and thus may perform poorly under the adverse effects of outliers. To solve such problem, a new fault detection method for non-Gaussian process based on robust independent component analysis (RobustICA) is proposed in this paper. A RobustICA algorithm which can effectively reduce the effects of outliers is firstly developed to estimate the mixing matrix and extract non-Gaussian feature called independent components (ICs) by robust whitening and robust determination of the maximum non-Gaussian directions. Furthermore, a monitoring statistic for each extracted IC is constructed to detect process faults. Simulations on a simple example of the mixing matrix estimation and a fault detection example in the continuous stirred tank reactor system demonstrate that the RobustICA achieves much higher estimation accuracy for the mixing matrix and the ICs than the commonly used FastICA algorithm, and the RobustICA-based fault detection method outperforms the conventional FastICA-based fault detection method in terms of the fault detection time and fault detection rate.     

A/O脱氮工艺实时控制对策的试验研究

以人工合成废水为研究对象,系统研究了提高A/O(anoxic/oxic)工艺氨氮和硝酸氮去除效率的实时控制对策.氨氮控制的本质是通过控制DO设定值和好氧区体积大小使出水氨氮浓度达标排放.硝酸氮控制的本质在于高效利用缺氧区反硝化潜力,为此建立了以调节内循环回流量或(和)外碳源投加量维持缺氧区末端硝酸氮浓度处于设定值的实时控制对策.系统控制采用两级结构,高水平监控层用来选择低水平执行层的设定值,而低水平执行层对DO值、好氧区体积、内循环回流量和外碳源投加量进行直接控制,试验表明上述控制对策可以显著提高系统脱氮效率,降低出水氨氮和硝酸氮浓度,并最大程度节约运行费用.     

三维电极电催化氧化法处理废水的研究进展

综述了近几年国内外在三维电极电化学反应器方面的最新研究进展,分析了电源的输出形式、阴阳极板的布置方式、粒子电极的填充方式等因素对废水处理效果的影响,探讨了碳纳米材料等新材料在粒子电极载体上的应用,最后介绍了三维电极法与其他技术联用的最新研究,并指出了三维电极法存在的问题及今后的研究方向。     

Residues of 14C‐γ‐HCH in paddy after dusting,and the fate of γ‐HCH during refining process of rice bran oil

Paddy (rice) plants were dusted with 10% HCH containing ¹⁴C‐Γ‐HCH, at the rate of 2.5 kg a.i./ha and ¹⁴C‐residues were determined in different fractions of rice. Rice bran (0.187 ppm) had more of ¹⁴C‐residues than grain (0.026 ppm) and husk (0.042 ppm). The rice bran oil contained 0.129 ppm HCH residues. While degumming, dewaxing, alkali refining and bleaching had no effect, deodorisation alone eliminated 99.5% of added ¹⁴C‐residues in rice bran the oil during refining process.     

A/O法处理水产品加工废水

采用A/O工艺处理水产品加工废水,处理量为500 t/d,运行两年来,效果稳定,处理结果表明:对COD、BOD5和氨氮的去除率分别为94.7%、98.1%和86.4%,出水达到GB 8978—1996《污水综合排放标准》中的一级排放标准,且该工艺具有运行费用低、处理效果好、操作管理方便等一系列优点。     

厌氧氨氧化工艺的抑制现象

厌氧氨氧化(Anammox)工艺因其高效低耗优势,在废水生物脱氮领域中具有广阔的应用前景.然而,基质、有机物、盐度、重金属、磷酸盐及硫化物等物质对Anammox工艺产生的抑制作用制约了工艺的推广应用.基质主要通过游离氨和游离亚硝酸对Anammox产生抑制,而温度和pH是基质抑制的重要调控参数.非致毒性有机物对Anammox的作用因其种类跟浓度而异.在较低的浓度条件下对Anammox的抑制作用不显著,而高于抑制阈值将严重抑制Anammox.其抑制机制尚无定论.部分研究证明致毒性有机物(醇、醛、酚及抗生素等)对Anammox具有抑制作用,但研究有待拓展深化.超过抑制阈值的盐度会抑制Anammox活性,但合适的盐度(3~15 g L-1NaCl)却能够促进Anammox生物颗粒的形成.重金属对Anammox的抑制报道较少.因试验条件及菌种等的差异使得磷酸盐及硫化物对Anammox的抑制在不同试验中存在很大差异.Anammox抑制是可控的,通过pH和温度调节、基质浓度及负荷控制、污泥驯化以及添加辅助剂等方法可解除或缓解抑制.建议今后在特种废水的Anammox脱氮、复合抑制以及Anammox抑制的分子生态学机理等方面开展深入研究.     

浅析混凝沉降实验研究与实际工艺的差异

介绍混凝沉降实验与实际沉降工艺各自的特点和存在的问题,从相似理论的角度出发,指出了玻璃量筒沉降实验和实际沉降工艺存在着几何尺寸、初始条件、运动条件三方面的不相似,较好地解释了两者的沉降速度和沉降效果的差异;并提出今后的混凝沉降实验应该进一步符合相似理论,从而更加合理地模拟实际沉降工艺.