The biodegradation of cable oil components: impact of oil concentration, nutrient addition and bioaugmentation

The effect of cable oil concentration, nutrient amendment and bioaugmentation on cable oil component biodegradation in a pristine agricultural soil was investigated. Biodegradation potential was evaluated over 21 d by measuring cumulative CO₂ respiration on a Micro-Oxymax respirometer and ¹⁴C-phenyldodecane mineralisation using a ¹⁴C-respirometric assay. Cable oil concentration had a significant effect upon oil biodegradation. Microbial respiratory activity increased with increasing cable oil concentration, whereas ¹⁴C-phenydodecane mineralisation decreased. Bioaugmentation achieved the best cable oil biodegradation performance, resulting in increases in cumulative CO₂ respiration, and maximum rates and extents of ¹⁴C-phenyldodecane mineralisation. Generally, nutrient amendment also enhanced cable oil biodegradation, but not to the extent that degrader amendment did. Cable oil biodegradation was a function of (i) cable oil concentration and (ii) catabolic ability of microbial populations. Bioaugmentation may enhance cable oil biodegradation, and is dependent upon composition, cell number and application of catabolic inocula to soil.     

利用化学强化分离-无害化技术处理废弃油基钻井液

废弃油基钻井液因其含有油类、重金属、有机物等污染物,属国家危险废弃物,处理难度大.通过大量室内实验研究,首次采用化学强化分离-无害化技术处理废弃油基钻井液,研制了新型清油剂和无害化处理药剂,回收了废弃油基钻井液中的油类,油回收率达90%以上.回收油的品质好,除机械杂质和灰分指标外,所测的几项指标均达到GB252-200...     

稠油降解菌的筛选、鉴定与菌群构建

分别以烷烃、芳烃、胶质沥青质为唯一碳源,从稠油污染过的土壤里分离、筛选可培养的降解菌,将16株组合构建SL-16稠油降解菌群,通过室内摇瓶实验测得该菌群在最佳条件下对陈庄油田稠油降解率可达68%,其适宜的生长及降解温度为35～45℃,pH值为7.0～9.0,含盐量为4 000～14 000 mg/L,接种量为2%,稠油...     

水域泄漏油品回收处理技术

提出了水域泄漏油品回收技术的装备需求,介绍了水域泄漏油品问收处理措施.采用拦油栅来控制漂浮在水上的油品,将泄漏油品集中在相对较小的区域内,并使水面的浮油层加厚,然后使用人工或机械对泄漏油品进行回收.对于水域中的少量泄漏油品,采用吸油材料来进行吸附.在油膜较薄,难以用机械方法回收的情况下,使用消油剂或固化剂进行处理.水域...     

废旧硅橡胶酸性热解残渣热解馏出物组分分析

在不同温度下对废旧硅橡胶酸性热解残渣进行热解,通过气相色谱-质谱联用技术对馏出油的组分进行分离与鉴定.实验结果表明:当热解温度为180℃时,馏出油组分相对较单一,主要是低沸点硅油类物质,可再次回收利用,实现清洁生产;当热解温度为340℃时,馏出油组分多且复杂,主要为高沸点硅油类物质,还有硅油类物质氧化和高温热解后的产物...     

Short-term impact of olive mill wastewater (OMWW) applications on the physico-chemical and microbiological soil properties of an olive grove in Argentina

The purpose of this work was to investigate the effects of spreading olive oil mill wastewater (OMWW) on soil biochemical parameters and olive production in an organically managed olive orchard. The experiment was carried out with three different doses of OMWW (80, 160 and 500 m³ ha^?1) and a control (untreated soil). Three samplings were done at 10, 30 and 90 days after the administration of the byproduct. OMWW application differentially modified the biochemical properties of the soil analyzed. Organic matter, organic carbon, total nitrogen and extractable phosphorus soil contents increased proportionally with each increasing dose. The values of these parameters decreased gradually with time. Total microbial activity was altered and the OMWW 500 m³ ha^?1 treatment proved to be the most active when compared with the other applied doses. OMWW agricultural application also modified the structure of soil microbial communities, particularly affecting Gram positive and negative bacteria, while fungal biomass did not show consistent changes. Although there was a salinity increase in the treated soil, especially at the highest dose, the productive parameters analyzed (fruit and oil tree^?1) were not affected. In light of the obtained results, we consider that low dose of OMWW could be considered an alternative farming practice for semiarid regions.     

Uncertainty estimation in the analysis of pesticide residues in olive oil using data from proficiency tests

In this work we report the results for estimating the measurement uncertainty (MU) following up the application of two different approaches, relatively the top-down procedure, by using proficiency test data. We have focused the estimation on the olive oil matrix. We used the analytical data obtained from five selected editions of the Proficiency Tests (PTs, from 2007 to 2011) on pesticide residues in olive oil to estimate the MU. These PTs have been organized by Istituto Superiore di Sanità annually in cooperation with International Olive Council (IOC) since 1997. The number of participants in each trial ranged from 10 to 43. We used a total of 34 pesticide results. The expanded uncertainty U _(c) was calculated using a covering factor k = 2 for a confidence interval of 95%. In the approach 1, the within–laboratory reproducibility standard deviation is combined with estimates of the method and laboratory bias using PTs data. In the approach 2, the way of estimating the MU is based only on the bias that the laboratory has obtained participating in a sufficient number of the IOC proficiency tests. Comparing the relative expanded uncertainty based on these different approaches we notice values quite constant and close, from 42% to 48%. Moreover, these calculated expanded uncertainties are less than the default value of 50% (corresponding to a 95% confidence level), adopted from European guidance document SANCO based on the fit-for-purpose relative standard deviation (FFP-RSD).     

Bioconversion of wastes from olive oil industries by vermicomposting process using the epigeic earthworm Eisenia andrei

The present work evaluates the possible bioconversion of wet olive cake by low-cost biostabilization (vermicomposting process). Wet olive cake fresh (WOC), precomposted (WOCP), or mixed with biosolids (WOCB), were vermicomposted for 6 months to obtain organic amendments for agricultural and remediation purposes. The results showed initial differences depending on previous treatment. WOCP was initially more stable, presented a low C:N ratio, and showed more dehydrogenase and urease activity. By contrast, there was no dehydrogenase activity initially in WOC and WOCB, due to the presence of some different types of polyphenols. Finally, the end product showed relatively higher amounts of total nitrogen and humic acid and met the standard of quality for composts and vermicomposts for use both in conventional and organic agriculture and soil-restoration programs.     

响应面法优化克浅十油田废水的混凝沉淀工艺

以克浅十污水处理站原水为研究对象,采用混凝沉淀工艺,探讨优选出的复配混凝剂投加量、助凝剂投加量及静置时间对原水中浊度和总铁去除效果的影响.应用Box-Behnken中心组合实验和响应面分析法,建立混凝剂对处理原水的二次多项式数学模型,确定了混凝沉淀去除原水浊度和总铁的优化工艺参数分别为:复配混凝剂投加量为152.15 mg/L、143.84 mg/L,助凝剂投加量为4.14 mg/L、4.32 mg/L,静置时间为11.77 min、11.22 min.在此工艺条件下回归方程得到的浊度和总铁的去除率预测值与实验值接近,且拟合性良好,误差介于3％～5％之间.通过均值内插法,对比浊度和总铁的多元二次回归方程,推导得出的2组最佳工艺条件均能满足浊度和总铁的去除要求.     

印刷用铝基材碱洗废液的循环利用

对印刷用铝基材碱洗废液进行了循环利用研究。首先将高COD含量的碱洗废液进行除油脱色处理,通过石灰和硬脂酸的协同效应,使COD含量从26300mg／L降至480mg／L,色度降至60°;然后利用含铝碱性废液通过碳化法制备出结晶度66％的拟薄水铝石产品;最后对分离后的碱性废水按配方要求配制,对铝基材进行除油实验,经5次循环表明,除油效果和对铝基材的腐蚀率均100％达标。