Selection of failure frequency and its impact on risk assessment – A case study from plot plan optimisation

Facility Siting is an important phase of project development. A critical stage is plot plan optimisation, where significant potential hazards are eliminated due to equipment spacing. In addition to ensuring appropriate compliance with minimum spacing requirements, occupied building studies to achieve compliance with the requirements of API 752 and API 753 could also be undertaken to optimise safety outcomes. The studies are done in three stages, where the first stage is hazard identification, second stage is consequence assessment and the third stage is risk assessment. Third stage assessments are only carried, if the consequence based siting recommendations are not practical to implement.This paper presents the challenges in estimating risk due to process hazards with a focus on selecting right event likelihood data. A comparison is presented on the variation in predicted risk levels based on equipment failure rates and leak frequencies.Case study of a plot plan optimisation study is undertaken with DNVGL Phast Risk and the variation in risk levels up to two orders of magnitude are recorded. Challenges such as adaption of data for local conditions, consistent definitions of failure, sample size of data, applicability of data play a significant role in identifying and correctly quantifying the risk levels. Such challenges and its impact on risk quantification are presented in this paper as well as its impact on facility siting.     

Investigation of multiple domino scenarios caused by fragments

A model of multiple domino scenarios and the risk of the domino effect, which is a sequential chain escalating from the primary unit to the last unit, is presented in this paper. The trajectories of fragments from all units, the ground distribution of projectiles, and the risk of the sequential chain of the domino effect were calculated using Monte Carlo simulations. The results showed that the range affected by the fragments from each tank included the other tanks, meaning that fragments from one tank could hit the other tanks and cause multiple accidents, and that the sequential chain of the domino effect could indeed happen. The distributions of ground impacts showed that tank fragments were projected over long distances, up to 1200 m from the source. The spatial distribution of the kinetic energy at ground impact for tank fragments was also obtained. Moreover, the magnitudes of the probabilities of the primary, secondary, third, and fourth accidents in the domino chain were respectively about 10⁻⁷, 10⁻¹¹, 10⁻¹⁵, and 10⁻¹⁹. These results showed that for neighboring domino effect units in the same accident chain, the risk of the most recent domino effect was 10⁴ times that of the following domino effect.     

城市电力供应系统公共安全风险评估体系及应用

城市电力供应系统与城市公共安全关系紧密，文章分析了导致城市电力供应系统故障或事故的主要风险因素、事故类型及其风险程度，建立了城市电力供应系统公共安全风险评估体系。利用建立的风险评估体系，对某市电力供应系统的安全性进行了风险评估，同时验证了该体系在城市电力供应系统风险评估中的良好适用性。     

Hydromorphological and socio-cultural assessment of urban rivers to promote nature-based solutions in Jarabacoa,Dominican Republic

In Latin America and the Caribbean, river restoration projects are increasing, but many lack strategic planning and monitoring. We tested the applicability of a rapid visual social–ecological stream assessment method for restoration planning, complemented by a citizen survey on perceptions and uses of blue and green infrastructure. We applied the method at three urban streams in Jarabacoa (Dominican Republic) to identify and prioritize preferred areas for nature-based solutions. The method provides spatially explicit information for strategic river restoration planning, and its efficiency makes it suitable for use in data-poor contexts. It identifies well-preserved, moderately altered, and critically impaired areas regarding their hydromorphological and socio-cultural conditions, as well as demands on green and blue infrastructure. The transferability of the method can be improved by defining reference states for assessing the hydromorphology of tropical rivers, refining socio-cultural parameters to better address river services and widespread urban challenges, and balancing trade-offs between ecological and social restoration goals.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01565-3.     

辽宁省菱镁矿区生态修复研究

针对辽宁省菱镁矿区资源状况与环境问题,提出菱镁矿区土地生态修复技术对策,包括土壤污染等级分类对策、不同立地条件土地复垦适宜性评价与对策、板结土壤复垦技术与对策和排土场贫瘠土壤肥力改良修复对策,进行适宜性复垦植物筛选与复垦效果评价。     

环评监测现场采样中应注意的问题

根据环境影响评价监测的要求,提出了环评监测中方案的细化、点位布设方面存在的问题,阐述了如何合理设置监测点位、准确把握采样方法、科学选择分析方法等问题。     

土地利用规划环境影响评价若干问题探讨

土地利用规划环境影响评价的作用是为了实现土地的规划和环境相互适应、相互协调,为规划决策者提供一定的技术支撑。文章阐述了土地规划环境影响评价重要意义、内容及相关程序,同时也对此提出了针对性的建议,积极推进及完善土地利用规划环境影响评价在现阶段十分必要。     

克山县空气质量及变化趋势

通过对克山县2003—2012年的空气监测数据分析,二氧化硫和总悬浮物颗粒物呈下降趋势,氮氧化物和降尘浓度变化不大;尘类是影响环境质量的主要污染物,县区环境空气质量呈轻度污染,根据各年度的监测数据来看,环境空气质量逐年得到改善。     

某矿低铜废石综合回收利用项目职业病危害预评价

为了对某矿业有限公司低铜废石综合回收利用项目可能产生的职业病危害因素进行辨识、分析和评价,采用检查表、类比法相结合的原则对该项目的铲装、破碎、运输、筑堆等工艺进行分析评价,并利用经验法对浸出、萃取电积工艺进行分析评价。结果表明:类比工程中绝大部分粉尘、噪声检测点的浓（强）度符合国家标准;化学毒物、工频电场接触浓（强）度符合国家标准;电积车间的通风满足要求;萃取车间的事故通风能力不足。评价方法及通风计算方法对同类项目具有借鉴意义。     

A risk reduction approach for academic research labs: A case study on naphthenic corrosion

Academic research and development (R&D) labs are a significant part of academic life. But there can be physical, environmental, and experiment quality risks associated to this activity. Academic labs can present specific experiments, which have associated risks for researchers. Academic labs are also characterized by a high turnover of students and many of them are not fully aware of the level of physical and environmental risks of their activity. Accidents in academic labs with injuries and loss of life are facts that have to be tackled through risk management approaches. The objective of this paper is to present an integrated management approach, tackling risk management and analysis methods. HAZOP (Hazard and Operability Study) and PFMEA (Process Failure Mode and Effects Analysis) enabled, respectively, the analysis of safety and environmental risks. By quantifying the level of risk according to the type of experiment and the research context, it is possible to provide safety to the system. The resulting Digital Poka-Yoke – a mistake-proofing approach – has brought about the desired quality of results in experiments. The proposed approach was validated through a case study monitoring naphthenic corrosion experiments conducted by the Lab of Surface Electrochemistry and Corrosion (LSEC) at the Federal University of Paraná (UFPR). As a consequence, this approach is currently in use at this lab.