Workers’ exposure to electric fields during the task ‘maintenance of an operating device of circuit breaker from a service platform’ at 110-kV substations

The objective of the study was to investigate occupational exposure to electric fields during the task ‘maintenance of an operating device of circuit breaker from a service platform’ at 110-kV substations. The aim was also to compare the results to Directive 2013/35/EU. At 16 substations, 255 electric field measurements were performed. The highest mean value of the electric fields was 9.6?kV?m^?1. At 63% of substations the maximum values were over 10.0?kV?m^?1, and at 31% of the substations the 75th percentiles were over 10.0?kV?m^?1, which is the low action level (AL) according to Directive 2013/35/EU. All measured values were below the high AL (20.0?kV?m^?1). In the future, it is important to take into account that the measurements were only taken at Finnish 110-kV substations; therefore, it is not possible to generalize these results to other countries and different types of substations.     

Measurements of indoor radon concentrations in the Santiago de Compostela area

Galician soils are among those with the highest (222)Rn exhalation rates in Spain. A year-round study of the indoor (222)Rn concentration in buildings in the Santiago de Compostela area (Galicia, Northwest of Spain) was performed. The study is based on systematic samplings with active charcoal canisters, following a modified EPA 520/5-87-005 protocol. These measurements were complemented by others obtained using etched track dosimeters. Each data set follows a log-normal distribution, with a geometric mean of (253+/-3)Bqm(-3) for charcoal canisters and (285+/-2.5)Bqm(-3) for etched track detectors. After correcting for the different measuring conditions, the mean value of both methods differed by only 2%. A careful analysis of the seasonal dependence of our measurements did not reveal any significant seasonal variations in the (222)Rn concentration. Parallel to these measurements, different meteorological parameters were recorded, which revealed a direct correlation between the indoor radon concentration and the outdoor temperature derivative with respect to time.     

Towards eliminating systematic errors caused by the experimental conditions in Biochemical Methane Potential (BMP) tests

The Biochemical Methane Potential (BMP) test is increasingly recognised as a tool for selecting and pricing biomass material for production of biogas. However, the results for the same substrate often differ between laboratories and much work to standardise such tests is still needed. In the current study, the effects from four environmental factors (i.e. ambient temperature and pressure, water vapour content and initial gas composition of the reactor headspace) on the degradation kinetics and the determined methane potential were evaluated with a 2⁴ full factorial design. Four substrates, with different biodegradation profiles, were investigated and the ambient temperature was found to be the most significant contributor to errors in the methane potential. Concerning the kinetics of the process, the environmental factors’ impact on the calculated rate constants was negligible. The impact of the environmental factors on the kinetic parameters and methane potential from performing a BMP test at different geographical locations around the world was simulated by adjusting the data according to the ambient temperature and pressure of some chosen model sites. The largest effect on the methane potential was registered from tests performed at high altitudes due to a low ambient pressure. The results from this study illustrate the importance of considering the environmental factors’ influence on volumetric gas measurement in BMP tests. This is essential to achieve trustworthy and standardised results that can be used by researchers and end users from all over the world.     

Radon mapping by retrospective measurements - an approach based on CDs/DVDs

This article points out the ability to map retrospective ²²²Rn concentrations by home stored CDs/DVDs. The method employs the high radon absorption ability of the polycarbonate material of CDs and DVDs and their track-etch properties. The principle steps for the application of the method are addressed. The possibility for individual a posteriori calibration is studied, demonstrating that better than 10% accuracy in retrospective measurements is potentially achievable. Results from retrospective measurements in three different regions are shown, demonstrating the potential of the method for large-scale radon mapping. Comparison with independently evaluated retrospective ²²²Rn concentrations in places with known radon history was made and very good correspondence was observed. The experience indicates that the method can be used for large scale retrospective radon mapping and its applications can be expanded towards mapping of radon concentrations in water and soil gas.     

First in situ UV profile across the UTLS accompanied by ozone measurement over the Tibetan Plateau

Ultraviolet radiation (UV) and ozone can greatly affect human health and the Earth's ecological environment. By deploying a UV radiometer aboard a stratospheric balloon released at Qaidam (QDM) during the Asian summer monsoon (ASM) period in 2019, we provided in situ measurement of the UV profiles from the surface to the upper troposphere and lower stratosphere over the Tibetan Plateau (TP), China, for the first time. Based on two in situ UV profiles accompanied by four ozonesonde measurements, this study exhibited detailed variations of downwelling UV and vertical ozone distributions over the TP during the ASM period. The UV differences between the surface and stratospheric balloon flight altitudes were 16.7, 15.8, 12.6 and 18.0 Wm^?2 during the four ozonesonde launches. Due to the diurnal variations in photochemical production and the stratosphere-troposphere exchange, the integrated ozone columns below 30 km ranged from 184.4 to 221.6 DU from four ozonesonde measurements. A positive correlation between UV attenuation and ozone column was exhibited under low cloud cover and clear sky conditions. The results of this study are expected to improve our understanding of UV and ozone properties, as well as their potential effects on terrestrial ecosystems and living environments over this significant plateau.     

天津市机动车尾气排放因子研究

通过调查研究天津市机动车车型构成、保有量、车辆行驶状况、气象数据和油品等基础数据,利用COPERT IV模型计算了在国1、国2、国3、国4和国5排放标准下机动车尾气中CO、NO_x、VOC和PM_(2.5)的排放因子.应用车载测试系统在实际道路上对国4柴油货车的排放因子进行了测量,并将模型结果与实测结果进行了比较,研究表明,国4排放标准下,污染物排放实测数据普遍高于模型模拟数据.对于轻型载货柴油车而言,实际道路测量的CO、NO_x、VOC和PM_(2.5)的排放因子分别是模型模拟数据的2.5、4.3、1.9和1.2倍;对于中型载货柴油车而言,以上污染物的实测排放因子分别是模型的1.3、2.1、1.0和1.2倍;对于重型载货柴油车而言,以上污染物的实测排放因子分别是模型的1.7、1.9、1.1和1.2倍.     

The Strange Career of the Ringelmann Smoke Chart

The Ringelmann smoke chart was used in the United States to assess smoke emissions in the early twentieth century. In fact, it may have been the most important method for measuring air pollution between the late 1800s and the environmental era. However, the popularity of the Ringelmann chart stood in stark contrast to its lack of precision, which smoke abatement experts recognized and discussed among themselves. However, the critique of the Ringelmann scale rarely left the circle of experts and never jeopardized its use. This article discusses the reasons for this striking phenomenon, pointing out that the Ringelmann chart had strong practical and symbolic advantages: it allowed smoke abatement to be conducted in a public and transparent way. With that, the history of the Ringelmann smoke chart is an instructive model for the social construction of measuring techniques.     

Measurements of carbonyls in a 13-story building

BACKGROUND, AIM AND SCOPE: Formaldehyde and acetaldehyde are emitted by many mobile and stationary sources and secondary aldehydes are intermediates in the photo-oxidation of organic compounds in the atmosphere. These aldehydes are emitted indoors by many materials such as furniture, carpets, heating and cooling systems, an by smoking. Carbonyls, mainly formaldehyde and acetaldehyde, have been studied because of their adverse health effects. In addition, formaldehyde is a suspected carcinogen. Therefore, the concentrations of formaldehyde and acetaldehyde were determined to assess the inhalation exposure doses to carbonyls for people who work in a 13-story building and in order to evaluate the cancer hazard. METHODS: Carbonyl compounds in indoor and outdoor air were measured at a 13-story building located in Mexico City. The mezzanine, fifth and tenth floors, and the third level-parking garage were selected for sampling. Samples were collected in two sampling periods, the first from April 20 to 29, 1998 and the second from December 1 to 20, 1998. Carbonyls were sampled by means of DNHP-coated cartridges at a flow rate of 1 l min(-1) from 9:00 to 19:00 hours, during 2-hour time intervals and analyzed by HPLC with hours, during 2-hour time intervals and analyzed by HPLC with UV/VIS detection. RESULTS: Mean carbonyl concentrations were highest in the 3rd level-parking garage, with the formaldehyde concentration being the highest ranging from 108 to 418 microg m(-3). In working areas, the highest carbonyl arithmetic mean concentrations (AM) were observed on the 5th floor. Acetone and formaldehyde concentrations were highest in April ranging from 161 to 348 microg m(-3) (AM = 226) and from 157 to 270 microg m(-3) (AM = 221), respectively. Propionaldehyde and butyraldehyde were present in smaller concentrations ranging from 2 to 25 and 1 to 28 microg m(-3), respectively, considering all the samples. Mean indoor/outdoor ratios of carbonyls ranged from 1.8 to 9.6. A reduction of inhalation exposure doses of 41% and 45% was observed in the fifth floor air after the air conditioning systems had been repaired. Formaldehyde and acetaldehyde concentrations were higher in smoking environments. CONCLUSION: Indoor carbonyl concentrations were significantly greater than outdoor concentrations. Tobacco smoke seems to be the main indoor source of formaldehyde. After the air conditioning system was maintained and repaired (as was recommended), an important reduction in the emission of formaldehyde and acetaldehyde was achieved on all floors, except for the 3rd level parking garage, thereby reducing the inhalation exposure doses. RECOMMENDATION: The results obtained in this research demonstrated that maintenance of air conditioning systems must be carried out regularly in order to avoid possible adverse effects on health. Additionally, it is mandatory that isolated smoking areas, with air extraction systems, be installed in every public building.     

Field scale N2O flux measurements from grassland using eddy covariance

In order to assess nitrous oxide (N₂O) emissions from typical intensively managed grassland in northern Britain fluxes were measured by eddy covariance using tuneable diode laser absorption spectroscopy from June 2002 to June 2003 for a total period of 4000 h. With micrometeorological techniques it is possible to obtain a very detailed picture of the fluxes of N₂O at field scale (10³–10⁴ m²), which are valuable for extrapolation to regional scales. In this paper three of the four fertilizer applications were investigated in detail. N₂O emissions did not always show a clear response. Hourly fluxes were very large immediately after the June 2002 nitrogen fertilizer application, peaking at 2.5 mg N₂O–N m^–2 s^–1. Daily fluxes were averaging about 300 ng N₂O m^–2 s^–1 over the 4 days following fertilizer application. The response of N₂O emissions was less evident after the August fertilization, although 2 days after fertilizer application an hourly maximum flux of 554 ng N₂O–N m^–2 s^–1 was registered. For the rest of August the flux was undetectable. The differences between fertilization events can be explained by different environmental conditions, such as soil temperature and rainfall. A fertiliser-induced N₂O emission was not observed after fertilizer application in March 2003, due to lack of rainfall. The total N₂O flux from June 2002 to June 2003 was 5.5 kg N₂O–N ha^–1y^–1, which is 2.8% of the total annual N fertilizer input.     

Measuring Eddy Covariance Fluxes of Ammonia Using Tunable Diode Laser Absorption Spectroscopy

Field measurements of NH3 fluxes using an eddy covariance technique were made for a total of 60 days between July and September 2002 at an intensively managed grassland in Southern Scotland. The collected data demonstrate the suitability of a tuneable diode laser absorption spectroscopy (TDLAS) system coupled with a sonic anemometer for eddy covariance measurements. The novelty of these measurements is the application to ammonia, which has only become measurable using TDLAS techniques recently, because of its small ambient concentration. Data presented in this paper show typical features of the fluxes and concentration for the summer season. NH3 concentration and flux values are in a similar range to previous studies using flux gradient methods at the same field site, although the particularly wet season reduced the concentration of NH₃ in the air. For an example day, measured NH₃ fluxes ranged between –11 and 44 ng m^–2 s^–1 with an average value of 3.78 ng m^–2 s^–1 indicating a small net emission from the vegetation. Spectral analysis executed on the data shows the percentage of flux carried by the small eddies (from 0.2 to 2 m) suggesting that high detection frequency instruments are particularly suitable for estimating NH₃ fluxes between atmosphere and vegetation.