加大加强通风量对防止煤矿瓦斯爆炸的副作用

分析产生瓦斯爆炸的基本条件,指出在绝对瓦斯涌出量为5～75m3/min或更大的轻度瓦斯突出的异常情况下,风筒送入的风与突出的瓦斯混合,会在较长巷道内形成大量的瓦斯浓度处于爆炸上限与下限之间的可爆混气.风量越大,形成的可爆混气体积越大,如400m3/min的风量在2 min内就可形成≥842 m3的可爆混气.遇火源可发生强烈的爆炸甚至爆轰,造成较大的伤亡甚至整个矿井内大部分人员死亡.这表明,加大加强的风量对防止煤矿瓦斯爆炸起副(反)作用.这种副作用已在试验巷道用天然气爆炸试验中得到证明.目前煤炭界采取的各种措施不能有效地消除加大加强风量引起的副(反)作用.提出了2种消除副作用的措施,即瓦斯传感器断电与复电方法和抽吸方法,并经试验证明是有效的.     

In-situ electrochemical measurements of total concentration and speciation of heavy metals in acid mine drainage (AMD): assessment of the use of anodic stripping voltammetry

We assessed the use of anodic stripping voltammetry (ASV) for in-situ determinations of both total concentration and speciation of dissolved heavy metals (Cd, Cu, Pb and Zn) in acid mine drainage (AMD). In the Kwangyang Au–Ag mine area of South Korea, different sites with varying water chemistry within an AMD were studied with a field portable anodic stripping voltammeter. Anodic stripping voltammetry after wet oxidation (acidification) was very sensitive enough to determine total concentration of dissolved Cd because Cd was dominantly present as ‘labile’ species, whilst the technique was not so effective for determining total Cu especially in the downstream sites from the retention pond, due to its complexation with organic matter. For dissolved Pb, the concentrations determined by ASV after wet oxidation generally agreed with those by ICP-AES. In the downstream samples (pH>5), however, ASV data after wet oxidation were lower than ICP-AES data because a significant fraction of dissolved Pb was present in those samples as ‘inert’ species associated with colloidal iron oxide particles. The determination of total dissolved Zn by ASV after wet oxidation appeared to be unsatisfactory for the samples with high Cu content, possibly due to the interference by the formation of Zn–Cu intermetallic compounds on the mercury coated electrode. In AMD samples with high dissolved iron, use of ultraviolet irradiation was not effective for determining total concentrations because humate destruction by UV irradiation possibly resulted in the removal of a part of dissolved heavy metals from waters through the precipitation of iron hydroxides.     

煤矿企业的安全文化建设探索与实践

煤矿的安全生产与企业安全文化有着内在的联系,两者相辅相成、相互联系。结合莒山煤矿对安全文化建设进行探索与实践,坚持以“三个代表”重要思想为指导,通过健全管理组织体系,完善各项规章制度,采取丰富多样的宣传手段,装备有效的安全设施以及强化安全基层基础管理等途径,倡导和树立安全发展理念,激发员工“关注安全、关爱生命”的本能意识,塑造正确的安全价值观,建成能充分保障员工安全与健康的安全文化体系。     

Titration Curves: A Useful Instrument for Assessing the Buffer Systems of Acidic Mining Waters (10 pp)

Background, Aims and Scope The acidification of mine waters is generally caused by metal sulfide oxidation, related to mining activities. These waters are characterized by low pH and high acidity due to strong buffering systems. The standard acidity parameter, the Base Neutralization Capacity (BNC) is determined by endpoint titration, and reflects a cumulative parameter of both hydrogen ions and all buffering systems, but does not give information on the individual buffer systems. We demonstrate that a detailed interpretation of titration curves can provide information about the strength of the buffering systems. The buffering systems are of importance for environmental studies and treatment of acidic mining waters. Methods Titrations were carried out by means of an automatic titrator using acidic mining waters from Germany and Canada. The curves were interpreted, compared with each other, to endpoint titration results and to elemental concentrations contained therein. Results and Discussion The titration curves were highly reproducible, and contained information about the strength of the buffer systems present. Interpretations are given, and the classification and comparison of acidic mining waters, by the nature and strength of their buffering systems derived from titration curves are discussed. The BNC-values calculated from the curves were more precise than the ones determined by the standard endpoint titration method. Due to the complex buffer mechanisms in acidic mining waters, the calculation of major metal concentrations from the shape of the titration curve resulted in estimates, which should not be confused with precise elemental analysis results. Conclusion Titration curves provide an inexpensive, valuable and versatile tool, by which to obtain sophisticated information of the acidity in acidic water. The information about the strength of the present buffer systems can help to understand and document the complex nature of acidic mining water buffer systems. Finally, the interpretation of titration curves could help to improve treatment measurements and the ecological understanding of these acidic waters.     

湖南锡矿山周边土壤-农作物系统锑迁移转换特征及污染评价

为了解湖南锡矿山周边土壤与农产品锑(Sb)含量特征和污染状况,为锑矿区土壤锑污染防治和农田安全利用提供科学依据.以湖南锡矿山为研究区,采集周边不同区域农田土壤及相应农产品,共计193对,通过分析土壤锑含量、基本理化性质和农产品锑含量,研究锑在土壤-农产品系统中迁移和转换特征,并且对土壤及农产品进行安全评估.结果表明,矿...     

金岭铁矿加强安全管理的措施与经验

山东金岭铁矿通过建立科学合理的安全管理模式,开创了安全生产的新局面,连续3年实现安全生产,社会和经济效益显著。     

非煤矿山安全评价方法探讨

介绍了非煤矿山安全评价的内容和方法,分析了目前评价方法的不足和缺陷,提出了一种新型非煤矿山安全评价方法,并结合湖北某石膏矿山安全评价的实例,阐述了这种评价方法的应用过程,最后对这种方法提出改进建议。     

基于Markov过程理论的矿用通风机系统可靠性研究

结合矿井通风系统中通风机分支系统实际,依据可靠性工程理论中Markov过程理论及相关知识,探讨了矿井通风机系统可靠性分析的新方法;推导出了通风机系统的可靠度及首次故障前平均寿命的计算公式;结合现场实际,进行了实例验证;根据通风机系统可靠性各项主要指标数据,分析了影响通风机系统可靠性的因素.为现场通风技术管理人员进一步掌握矿井通风机的可靠性运行状况提供了参考依据.     

煤层注水过程分析和煤体润湿机理研究

分析了煤层注水过程中水在煤体中的运动动力和过程,用界面化学理论分析了煤体表面的润湿过程,得出了煤体能够自行润湿的条件,即润湿过程的润湿功必须为正,同时得出了各种润湿过程的判断依据.根据上述理论分析,阐明了煤层注水降尘的润湿机理,为煤层注水提供理论基础.     

Influence of super-absorbent polymer on the growth rate of gas hydrate

The growth rate of hydrate and morphology of methane hydrate formation were studied in a visual pressure cell at 5.5 MPa. The gas hydrate formation was carried out (coal mine methane (CMM) + tetrahydrofuran (THF) + sodium dodecyl sulphate (SDS) + H₂O) with and without SAP. Experimental data on the hydrate growth rate and induction time were obtained for three different CMM samples. The influence of SAP on hydrate growth rate was determined. Results showed that after the addition of SAP, with the methane concentration increased in CMM, the induction time was reduced by 9 min, 10 min and 3 min, and the growth rate was shortened by 0.56 × 10⁻⁶/m³ min⁻¹, 0.53 × 10⁻⁶/m³ min⁻¹ and 1.42 × 10⁻⁶/m³ min⁻¹, respectively. This study could be useful for the recovery of methane from CMM by forming hydrate in the chemical and mining industry.