煤矿矿井水处理节能降耗实践

文章针对煤矿矿井水因含有油污和大量轻质悬浮物时存在处理能耗高、混凝刑消耗量大,导致处理成本高的情况,以华蓥山煤业股份公司龙滩煤矿水处理系统技改为例,探讨矿井水处理节能降耗的可行性和途径。本文介绍了根据矿井水特性及排放规律,以及混凝沉淀机理,通过优化设计矿井水处理工艺精减耗电设备,合理选择混凝药剂和投药方式等措施,达到提高沉淀效率,节能降耗的目的。     

Green and compatible industrial development in Western China

Western China has lagged a lot in terms of industrial structure and economic development,compared with the national average.And China announced its target of CO_2 emission reduction,i.e.by 2020,CO_2 emission per GDP will drop by40-45%compared with 2005.The target will be incorporated into China's long-term industrial planning.Against this background,this paper will make a comprehensive examination of the industrial development of Western China,aiming to discover a green and compatible way.First,we analyze the spatiotemporal evolution of regional industrial structure for the period 2000-2010.Second,we try to discover the industrial structure optimization path for Western China by employing the Vector Auto Regression model.Lastly,we try to provide some advice and suggestions for further industrial development in Western China.Our examination shows that further industrial development in Western China should pay full attention to resource conservation and recycling,and develop on a green and compatible path.     

炼油废水污泥脱水工艺条件的优化

采用化学除油降黏—污泥调理—离心脱水工艺处理某炼油厂废水处理系统的混合污泥,并对工艺条件进行优化。实验结果表明,最佳的工艺条件为：化学除油降黏阶段处理体系的pH=4,反应温度35 ℃,H₂O₂加入量 2 g/L,m（H₂O₂）∶ m（Fe²⁺）=4,反应时间 60 min;污泥调理反应阶段的CaO加入量7.0 g/L;离心脱水阶段在分离因数为1 558时脱水5 min。在此条件下,得到的泥饼的含水率为70.0%~75.0%（w）,含油率小于2%（w）,污泥比阻约为3.0×10⁷ s²/g。     

Optimization-Based Atmospheric Plume Source Identification

This work applies optimization and an Eulerian inversion approach presented by Bagtzoglou and Baun in 2005 in order to reconstruct contaminant plume time histories and to identify the likely source of atmospheric contamination using data from a real test site for the first time. Present-day distribution of an atmospheric contaminant plume as well as data points reflecting the plume history allow the reconstruction and provide the plume velocity, distribution, and probable source. The method was tested to a hypothetical case and with data from the Forest Atmosphere Transfer and Storage (FACTS) experiment in the Duke experimental forest site. In the scenarios presented herein, as well as in numerous cases tested for verification purposes, the model conserved mass, successfully located the peak of the plume, and managed to capture the motion of the plume well but underestimated the contaminant peak.     

1000 MW燃煤机组电除尘深度节能技术研究及应用

电除尘设备在减少工业粉尘排放量、降低大气环境污染、保护生态环境等方面有着重要的作用,随着我国对节能减排工作的重视及环保要求的提高,保证其安全、稳定、经济、节能运行成为火电厂环保工作重点。对北仓电厂三期2×1000 MW机组电除尘电场供电方式优化、电除尘振打方式优化、电除尘闭环控制技术、电除尘高频电源技术、电除尘灰斗、瓷套蒸汽加热技术组合集成应用进行了研究,在确保除尘效率达到要求的情况下,降低运行电耗。相关的电除尘深度节能技术成果在国内同类型设备中具有一定的借鉴意义。     

苏南地区转型发展中的人口问题研究

本文利用三普、四普、五普和最新的人口抽样调查资料,运用历史分析法和对比分析法,首先对苏南地区20世纪80年代以来的人口增长、人口城市化、人口结构演变等进行了回顾,评述了人口发展在苏南经济高速增长中所发挥的重要作用,并总结了苏南地区人口发展中的新特征;然后,提出苏南人口发展现状对苏南地区未来的进一步提升发展可能造成的主要制约与矛盾;最后,从政策调控的角度,分区、分类提出了人口优化发展的措施。     

提高炼油废水处理场的氨氮去除率

对炼油废水处理场现有工艺进行流程优化,将MBR装置调整在接触氧化池之后运行.优化流程后氨氮平均去除率可从近于0提高至71.70％;COD平均去除率可从50.00％提高至72.00％.通过对工艺流程的对比,分析了现有工艺氨氮质量浓度难以降低的原因,指出废水中存在的某些污染物对硝化细菌起到抑制作用,减少了反应器中硝化细菌的...     

2×130t/h热电锅炉烟气脱硫工程调试及优化

分析了2×130t/h锅炉配套石灰石—石膏脱硫系统调试过程中出现的问题,提出了解决措施并对运行参数进行了优化。结果表明,在实际工况下,燃用中低硫煤,控制吸收塔液位为7.3m,pH值为5.4,投运2台循环泵时,脱硫系统运行最为经济有效。     

采用支持向量机算法优化电化学处理油田污水的工艺参数

采用支持向量机(SVM)算法,将Box-Behnken设计法与支持向量回归算法(SVR)实验参数优化软件相结合,优化电化学去除油田污水COD的工艺参数。通过量子粒子群算法对SVM算法参数进行优化,从建立的回归模型中找到工艺参数的全局最佳点:电解时间60 min,电解电流3 A,三维电极填充料中石英砂质量695 g。模型得到的COD理论最优去除率为92.48%,验证实验得到的COD去除率为91.43%。     

An imprecise fuzzy risk approach for water quality management of a river system

Uncertainty plays an important role in water quality management problems. The major sources of uncertainty in a water quality management problem are the random nature of hydrologic variables and imprecision (fuzziness) associated with goals of the dischargers and pollution control agencies (PCA). Many Waste Load Allocation (WLA) problems are solved by considering these two sources of uncertainty. Apart from randomness and fuzziness, missing data in the time series of a hydrologic variable may result in additional uncertainty due to partial ignorance. These uncertainties render the input parameters as imprecise parameters in water quality decision making. In this paper an Imprecise Fuzzy Waste Load Allocation Model (IFWLAM) is developed for water quality management of a river system subject to uncertainty arising from partial ignorance. In a WLA problem, both randomness and imprecision can be addressed simultaneously by fuzzy risk of low water quality. A methodology is developed for the computation of imprecise fuzzy risk of low water quality, when the parameters are characterized by uncertainty due to partial ignorance. A Monte-Carlo simulation is performed to evaluate the imprecise fuzzy risk of low water quality by considering the input variables as imprecise. Fuzzy multiobjective optimization is used to formulate the multiobjective model. The model developed is based on a fuzzy multiobjective optimization problem with max–min as the operator. This usually does not result in a unique solution but gives multiple solutions. Two optimization models are developed to capture all the decision alternatives or multiple solutions. The objective of the two optimization models is to obtain a range of fractional removal levels for the dischargers, such that the resultant fuzzy risk will be within acceptable limits. Specification of a range for fractional removal levels enhances flexibility in decision making. The methodology is demonstrated with a case study of the Tunga–Bhadra river system in India.