板筋结构强度计算及最优化设计

板筋结构是除尘器的重要结构形式，其结构的强度与除尘器的安全性有着密切的关系。介绍了板筋结构在除尘器应用中的荷栽、强度计算方法，并利用VB软件进行板筋结构最优化设计。     

Surrogates for Macrofungi and Mosses in Reservation Planning

Abstract: Our knowledge of cryptogam taxonomy and species distributions is currently too poor to directly plan for their conservation. We used inventory data from four distinct vegetation types, near Hobart Tasmania, to address the proposition that vegetation type, vascular plant taxon composition, and environmental variables can act as surrogates for mosses and macrofungi in reservation planning. The four vegetation types proved distinct in their taxon composition for all macrofungi, mosses, and vascular plants. We tested the strength of the relationships between the composition of cryptogam taxonomic groups and vascular plant composition and between the environmental variables and canopy cover. Taxon composition of woody vascular plants and vascular plants was the best predictor of the taxon composition of mosses and macrofungi. Combinations of environmental variables and canopy cover were also strong predictors of the taxon composition of mosses and macrofungi. We used an optimization routine for vascular plant taxa and woody plant species and determined the representation of cryptogam taxa in these selections. We identified sites with approximately 10% and 30% of the greatest proportions of vascular plants and woody vascular plants and calculated representation of mosses and macrofungi at these sites. We compared the results of these site selections with random site selections and random selections stratified by vegetation type. Random selection of sites by vegetation type generally captured more cryptogams than site selection by vascular plants at the 10% level. Vascular plant and woody plant taxon composition, vegetation type, and environmental and structural characteristics, all showed promise as surrogates for capturing common cryptogams in reserve systems.     

Spatial Variation and Space Optimization of the Development of China’s Circular Economy

Abstract

China’s circular economy is still at the initial stage, whose development has many difficulties and problems requiring immediate resolution theoretically and practically. Due to the differences of regions on the scale of land, endowment of resources, economic basis and cultural background, the developmental levels and capabilities of circular economy are inevitably different. Based on establishing the indicator system for assessing the developmental level of regional circular economy, spatial variation of China’s circular economy is measured by the quantitative measurement using principal component analysis, and the existing problems are also analyzed and discussed. On one hand, the differences of the development capability of the circular economy of different provinces (cities) are profound in China; Difference between the first category (strong) and the second category (relatively strong) is 1.1264 points. Difference between the second category and the third category (relatively weak) is 0.3867 points. Difference between the third category and the fourth category (weak) is 1.0238 points. Difference between the first category and the fourth category reaches up to 2.0869 points. Average difference between the area where the developmental level of circular economy is relatively strong and the area where the developmental level of circular economy is relatively weak is 1.3617 points. The differences of the distribution of the areas, with different development capability of circular economy, which are located in the three economic regions of China, are also profound. The regions with a relatively strong development capability of circular economy are mainly located in the eastern economic area, which account for 22.58% of the whole regions, while only account for 12.90% in the middle and western economic areas. On the contrary, the regions with a relatively weak development capability of circular economy account for 48.39% in the middle and western area, while account for 16.13% in the eastern area. On the other hand, among regions with different development capability of circular economy, the regions with a relatively weak development capability of circular economy are in a dominant position, which account for 64.52% of all the provinces (cities), which indicates that the development of the China’s circular economy still has a long way to go. Though certain achievements have been made in the development of China’s circular economy, in general, there are still some obstacles to be tacked in the development of China’s circular economy which require the economic, legal and administrative methods.     

异丙醇与丙酸酐酯化反应的安全控制条件

针对异丙醇与丙酸酐酯化合成丙酸异丙酯工艺的反应失控危险性,利用泄放尺寸实验仪(VSP2)研究了其反应的放热特性,选择自催化模式模拟得到了反应动力学参数,并与实验数据进行了对比验证;利用得到动力学模型,模拟了该工艺在半间歇模式、反应温度为70℃时,中试规模(＞ 100L)条件下的反应特点,分析了反应失控的危险性,并针对加料程序进行了优化设计,得到最佳控制方法.     

某矿通风系统的改进与优化

通过对某矿通风系统现状分析和通风参数的测定,确认该矿井下通风系统存在的主要问题是：有效风量低,污风串联和污风循环严重,导致作业点通风效果差,部分作业地点空气中CO、NO2和CO2含量超过“GB16424-1996金属非金属地下矿山安全规程”规定标准;根据测定、分析和计算,结合该矿的实际情况,提出了改善矿山通风状况的多种可行性方案,并对这些方案采用计算机通风网络解算与优化,经方案比较,提出了井下通风系统改进与优化设计的最佳方案和通风系统的管理措施。     

中国中小城市生活垃圾优化管理模型的应用

根据中国中小城市生活垃圾基本特点,提出了适宜于中国中小城市生活垃圾优化管理的基本原则,确定出优化管理模型程序.通过实例分析,具体说明了优化管理模型的应用,计算出1999年、2005年和2010年规划系统城市生活垃圾的优化处理方案,通过费用比较充分验证和说明了中国中小城市生活垃圾优化管理模型的适用性与优越性.     

Prioritizing highway safety improvement projects: A multi-criteria model and case study with SafetyAnalyst

This paper presents a multi-criteria model for prioritizing highway safety improvement projects, in which a set of criteria related to the project’s technical, economic, and social impacts are properly weighted in consideration. The proposed model features an Analytical Hierarchy Process (AHP) framework to tackle the multi-criteria decision making problem. Different from the conventional AHP, this paper adds a fuzzy scale level between the criteria level and the alternative level, which offers the advantage of preventing the vagueness and uncertainty on judgments of the decision-maker(s). Such a unique modeling feature is further embedded with a non-linear optimization formulation to maximize the consistency in pair-wise comparison and weight estimation for each criterion. Case study results reveal that the proposed model is efficient not only for selecting the most suitable project for a specific site, but also for determining the priorities for implementing those suitable projects among multiple sites given the budget constraint. Comparative study between the proposed model and the existing ranking methods has also indicated its capability to capture the comprehensive impacts of all contributory factors which have been neglected by most existing single multi-criteria approaches during the safety project selection process. The clarity of model inputs, ease of synthesizing the final score of each candidate project, and the interpretation of results with respect to different selection criteria offer its best potential to be used as an effective tool for highway safety managers to assess and refine the safety improvement investments.     

处理含铁尘泥的DRI工艺优选及废气污染防治

将高炉炼铁及炼钢时产生的含铁尘泥作为配料回用于烧结生产是目前较常使用的方法,但是这些尘泥之中的重金属Zn和Pb可能会对烧结和后续的高炉炼铁产生不良影响,通过对直接还原铁的工艺和设备进行综合对比,确定以转底炉为主要设备的煤基直接还原工艺较为适合处理炼铁及炼钢的含铁尘泥,并对转底炉工艺的原理及污染防治措施进行了讨论,最后提出了该工艺和钢铁联合企业之间的循环经济产业链。     

基于点危险源的危险品运输路径优化研究

为合理选择危险品运输路径,降低危险品运输事故造成的损失,使道路危险品运输风险评价更符合实际情况,建立点危险源风险评价模型。模型综合考虑了运输时间和季节情况影响因子,在准确估算危险品泄漏事故毒害区域面积和后果损失的基础上,结合传统风险评价模型与最大最小模型进行求解。最后通过算例分析,检验该模型的实际运用,通过与传统求和方式所得的最优运输路径的对比,反映2种方式所求得的最优运输路径并不相同,同时也表明,用所建模型求得的运输路径风险值有更高的精确性。计算结果表明:该模型求得的某条运输路径的风险值等于该路径上风险值最大的路段的风险值,而不是该路径上所有路段的风险值之和。     

基于差异进化算法的爆破震速参数识别与优化

爆破震动衰减特性研究通常采用经典的萨道夫斯基公式实现。如何根据不同爆破条件合理选择公式中的场地系数K和衰减指数α是确定爆破控制参数的关键。实际工程分析中,通常采用可监测参数反演识别方法获取K和α值。以大连地铁2号线201标段接收井横通道爆破作业为背景,基于差异进化(DE)算法中缩放因子F和交叉概率Cr贡献值的合理选择,研究萨道夫斯基公式K和α的反演问题。首先,通过对算法中F和Cr不同取值对萨道夫斯基公式计算结果的影响分析,得到各向震速条件下收敛最小的F和Cr值;然后,根据F和Cr取值反演K和α参数。工程实践表明,基于DE算法反演识别得到的K和α值代入萨道夫斯基公式,计算得到的垂向、纬向、经向速度及合速度与实测速度变化趋势一致,并处在合理误差范围之内。