火电机组状态及性能全息诊断系统技术及应用

阐述了火电机组状态及性能全息诊断系统的技术原理、系统结构及应用情况。该系统以解决机组应用性能问题为目标,采用状态空间分析模型,具备多层次分析的运行操作指导,基于性能渐变特性的设备状态检修,包括分散度在内的运行指标考核以及定期的节能潜力诊断等功能,在10余家电厂44台近1500万kW机组上取得了供电煤耗平均降低1.5～3.5g（标煤）/kW.h的节能效果。     

煤矿矿井水处理节能降耗实践

文章针对煤矿矿井水因含有油污和大量轻质悬浮物时存在处理能耗高、混凝刑消耗量大,导致处理成本高的情况,以华蓥山煤业股份公司龙滩煤矿水处理系统技改为例,探讨矿井水处理节能降耗的可行性和途径。本文介绍了根据矿井水特性及排放规律,以及混凝沉淀机理,通过优化设计矿井水处理工艺精减耗电设备,合理选择混凝药剂和投药方式等措施,达到提高沉淀效率,节能降耗的目的。     

Green and compatible industrial development in Western China

Western China has lagged a lot in terms of industrial structure and economic development,compared with the national average.And China announced its target of CO_2 emission reduction,i.e.by 2020,CO_2 emission per GDP will drop by40-45%compared with 2005.The target will be incorporated into China's long-term industrial planning.Against this background,this paper will make a comprehensive examination of the industrial development of Western China,aiming to discover a green and compatible way.First,we analyze the spatiotemporal evolution of regional industrial structure for the period 2000-2010.Second,we try to discover the industrial structure optimization path for Western China by employing the Vector Auto Regression model.Lastly,we try to provide some advice and suggestions for further industrial development in Western China.Our examination shows that further industrial development in Western China should pay full attention to resource conservation and recycling,and develop on a green and compatible path.     

炼油废水污泥脱水工艺条件的优化

采用化学除油降黏—污泥调理—离心脱水工艺处理某炼油厂废水处理系统的混合污泥,并对工艺条件进行优化。实验结果表明,最佳的工艺条件为：化学除油降黏阶段处理体系的pH=4,反应温度35 ℃,H₂O₂加入量 2 g/L,m（H₂O₂）∶ m（Fe²⁺）=4,反应时间 60 min;污泥调理反应阶段的CaO加入量7.0 g/L;离心脱水阶段在分离因数为1 558时脱水5 min。在此条件下,得到的泥饼的含水率为70.0%~75.0%（w）,含油率小于2%（w）,污泥比阻约为3.0×10⁷ s²/g。     

Optimization-Based Atmospheric Plume Source Identification

This work applies optimization and an Eulerian inversion approach presented by Bagtzoglou and Baun in 2005 in order to reconstruct contaminant plume time histories and to identify the likely source of atmospheric contamination using data from a real test site for the first time. Present-day distribution of an atmospheric contaminant plume as well as data points reflecting the plume history allow the reconstruction and provide the plume velocity, distribution, and probable source. The method was tested to a hypothetical case and with data from the Forest Atmosphere Transfer and Storage (FACTS) experiment in the Duke experimental forest site. In the scenarios presented herein, as well as in numerous cases tested for verification purposes, the model conserved mass, successfully located the peak of the plume, and managed to capture the motion of the plume well but underestimated the contaminant peak.     

Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.     

1000 MW燃煤机组电除尘深度节能技术研究及应用

电除尘设备在减少工业粉尘排放量、降低大气环境污染、保护生态环境等方面有着重要的作用,随着我国对节能减排工作的重视及环保要求的提高,保证其安全、稳定、经济、节能运行成为火电厂环保工作重点。对北仓电厂三期2×1000 MW机组电除尘电场供电方式优化、电除尘振打方式优化、电除尘闭环控制技术、电除尘高频电源技术、电除尘灰斗、瓷套蒸汽加热技术组合集成应用进行了研究,在确保除尘效率达到要求的情况下,降低运行电耗。相关的电除尘深度节能技术成果在国内同类型设备中具有一定的借鉴意义。     

台风灾害债券设计——基于广东省数据的实证研究

台风作为全球发生频率最高,影响最严重的一种自然灾害,对我国的影响也非常严重。在巨灾风险证券化、巨灾债券已成为巨灾保险业大趋势的背景下,发展我国台风灾害债券具有重要的现实意义。以我国受台风灾害影响最严重的省份——广东省为研究对象,收集了其近30年相关台风损失数据,利用非寿险精算技术分析其台风的损失分布和次数分布,在此基础上利用CAMP模型和现金流分析对广东省的台风灾害债券做了初步设计。     

面向突发性水污染事件的三维可视化系统

针对突发性水污染事件的突发性、复杂性与潜在的次生衍生危害等特点,设计并开发了面向突发性水污染事件的三维可视化系统。对建设三维可视化系统的需求进行了分析,提出了系统的四层体系结构,基于三维地理信息系统World Wind组件,采用三维可视化环境建模、海量数据缓存机制以及基础地理信息集成等信息技术,开发了系统的基本应用与高级应用,将系统应用到2005年发生在松花江流域的突发性水污染事件中。实例表明:所设计的三维可视化系统具有集成性、可扩展性和较好三维表现力等特点,支持海量数据与复杂应用的集成与三维展示,为突发性水污染事件的空间模拟和决策支持提供支撑。     

消能减震技术用于C类框架学校建筑提高一度抗震设防加固的探讨

针对既有的C类框架学校建筑提高一度抗震设防的加固目标,从地震作用计算、结构抗震验算和抗震构造措施等方面详细分析了其中的加固难点,指出了应用传统抗震加固方法的一些不足之处,探讨了应用消能减震技术进行结构提高一度抗震设防加固的可行性;并以某C类框架学校建筑加固工程为实例,从减震控制效果分析、弹塑性变形验算、消能部件影响评价、抗震构造措施核查4个方面论证了消能减震加固方法的有效性和可操作性。结果表明,消能减震技术在C类框架学校建筑抗震加固中具有一定的应用优势,不但能有效控制结构的地震响应,而且依据减震效果可以适当降低结构的抗震构造要求。因此,只要通过合理的消能减震加固设计,再辅以额外的局部加强处理,完全可以实现C类框架学校建筑提高一度抗震设防的加固目标需求。