基于国内实测燃煤电厂烟气汞排放估算的不确定度

参照测量不确定度评定与表示的国家技术规范,基于近年来我国燃煤电厂常规污控设备协同脱汞的现场测试数据(文献报道和实测值)及各省原煤w(汞)的实测值,初步构建了国内燃煤电厂烟气汞排放不确定度的计算方法,并以2010年的燃煤量、污控方式布局为基础,计算了该年度汞排放的不确定度. 结果表明:2010年我国燃煤电厂烟气汞排放的总不确定度为48.8t,占平均排放总量的34.3%;其中60.2%源于污控设备脱汞效率的不确定度,39.8%源于原煤w(汞)的不确定度;采用ESP(静电除尘)、ESP+WFGD(静电除尘+湿法脱硫)、SCR+ESP+WFGD(选择性催化还原脱硝+静电除尘+湿法脱硫)和FF(袋式除尘)大气污控组合的机组各存在6.0、32.2、9.7和0.9t的烟气汞排放不确定度,分别占各对应机组烟气汞排放量的19.3%、32.8%、84.6%和53.6%,其中SCR+ESP+WFGD污控组合烟气汞排放的相对不确定度最大. 随着我国烟气脱硝工作全面推行,2015年以后,SCR+ESP+WFGD污控措施(组合)的机组所占比例将会提高到66%以上,如果仍以现有数据为基础,则来自SCR+ESP+WFGD污控措施(组合)机组的烟气汞排放不确定度将会大幅增加,因此急需增加对该类装置脱汞效率的实测样本数量.      

大城市机动车污染物排放与控制的情景预测

机动车排放控制措施的有效实施对改善城市大气环境质量具有重要意义. 以北京市为例,利用情景预测法评估2011—2020年各项控制措施对城市机动车常规污染物(CO、NO_x、HC、PM₁₀)的削减效果.建立Gompertz模型并估算动态车龄分布以预测机动车保有量,运用排放因子法估算6种机动车排放控制情景的污染物削减量. 结果表明:与基准情景相比,轻型客车保有量调控情景对CO、HC和PM₁₀的削减效果较显著,在2020年可分别削减7.81%、9.88%和5.78%;排放标准更新情景对4种污染物均能有效削减,尤其是对NO_x和PM₁₀,可分别削减21.19%和24.67%;而淘汰高排放机动车情景的短期削减效果显著,但中、长期效果较差;新能源车推广情景因受到经济、技术条件的限制,削减效果较弱;综合情景考虑了以上所有的削减控制措施并达到最大的削减效果,2020年对CO、NO_x、HC和PM₁₀的削减率分别达到29.45%、42.54%、28.04%和41.30%,与基准年(2010年)相比,分别削减约2.81×105、0.63×104、3.77×104和0.17×104t.      

珠江三角洲印刷行业VOCs组分排放清单及关键活性组分

根据珠江三角洲地区印刷行业活动数据和不锈钢罐采样-气质联用技术,获取了印刷工艺VOCs成分谱,建立了该地区2010年印刷行业VOCs组分排放清单,研究了不同工艺排放的臭氧生成潜势. 结果表明:该地区2010年印刷行业VOCs排放总量达8591.26t,深圳、东莞、佛山排放量较大.凹印是印刷行业主要VOCs排放工艺,排放量达5762.01t;平印和凸印次之,分别为1954.01和37.82t.不同工艺排放的VOCs组分差异较大,平印工艺排放的VOCs成分中异丙醇含量最多(306.58t),其次为正庚烷(115.87t);苯和甲苯是凸印工艺排放的VOCs成分中含量最大的2种化合物,分别达5.58和4.83t;乙酸乙酯是凹印工艺排放的VOCs成分中的首要化合物,达2482.85t.凸印工艺排放的VOCs单位浓度臭氧潜势最大,达1.30μg/m3,平印和凹印较小,分别为0.89和0.72μg/m3,各工艺排放的含氧有机物对臭氧生成潜势的贡献均为最大.      

我国原铝冶炼行业温室气体排放模型

我国原铝冶炼行业产业集中度较低,生产水平参差不齐,随着国内原铝产量不断增加,原铝行业碳排放及其计算方法备受关注. 针对我国原铝冶炼过程原料类型、能源结构复杂的特点,对国内外已有碳排放核算框架进行细化,从物料、工序、工艺3个层面构建了复杂的原铝冶炼系统温室气体排放计算模型. 在广泛文献调研的基础上,选取典型原铝冶炼企业开展现场调研及专家咨询,进而形成模型的基础数据库. 利用上述模型对我国2011年原铝冶炼过程碳排放进行核算. 结果表明:综合考虑氧化铝生产工艺结构、电解铝行业分布区域的电网能源结构,我国原铝冶炼系统CO₂排放因子(以铝锭计)为14.70t/t. 电解铝生产过程电耗相关排放占70%,南方电网区域电解铝生产电耗相关CO₂排放分别比华中、华北地区低13%、30%. 原铝冶炼行业可通过优先选用碳排放因子较低的物料、淘汰落后氧化铝工艺、开发引进低温低电压工艺技术等手段,进一步实现物料、工序及工艺的多层次温室气体减排.      

广东货船水运的温室气体排放和低碳发展对策

作为我国港口大省和低碳试点省,广东需先行测算船舶水运的GHG(温室气体)排放量基线,以探究低碳水运对策. 通过文献调研收集适用数据和资料,基于引擎功率法,测算了广东抵港货船在2010年的GHG排放量. 结果表明:广东专属经济区海域内货船水运的GHG总排放量为2887×104t,不确定性在-36%~45%之间,其中在领海区域内的排放量为730×104t;远洋集装箱船是GHG最大排放源,占总排放量的43%;集装箱船、干散货船、油轮和其他货船的GHG排放量不确定性均介于-30%~50%之间,远洋货船的主引擎在正常航行模式下输出功率是最主要的不确定性源. 基于分析船舶水运的GHG排放特征,提出船舶减速、向远洋货船供应岸电和内河货船主引擎转用天然气共3项低碳节能措施,共可减排40%的GHG排放量.该研究结果不仅为广东低碳水运发展提供基础性的GHG排放数据,也可为其他港口地区提供估算水运业GHG排放量的技术方法参考和实践经验.      

A comprehensive model to estimate the simultaneous release of acidic and basic gaseous pollutants from swine slurry under different scenarios

Swine slurry is a source of atmospheric pollutants. Emissions of basic and acidic compounds from slurry are largely dependent on the surface pH. In a storage system, the pH at the surface layers changes over time due to the volatilisation of ammonia (NH₃), carbon dioxide (CO₂) and acetic acid (HAc). In this article, a comprehensive gas emission–pH (GE–pH) coupled model is proposed to describe the simultaneous release of acidic and basic gaseous pollutants from swine slurry. The model was applied to describe the release of NH₃, CO₂, HAc and hydrogen sulphide (H₂S) from standard slurries stored in animal houses, outside storage tanks and lagoons. The modelled results agreed well with values reported in the literature and could be reasonably interpreted. The key parameters affecting the release of gases were: initial pH, initial concentration of total ammonium nitrogen and inorganic carbon, slurry temperature and air velocity. This study suggests that future modelling studies on gas emissions from animal slurry should consider the concentration of inorganic carbon and the frequency in which the slurry surface is mixed or altered, because they affect the surface pH and the release of gaseous pollutants from slurry.     

影响中国碳排放绩效的区域特征研究——基于熵值法的聚类分析

论文选择影响碳排放绩效的主要指标,基于熵值法确定各指标权重,采用系统聚类分析的方法,以中国省域为研究对象,将全国分为7类区域。分析结果显示:区域分工特征是造成目前中国省级碳排放绩效区域差异的主要影响因素,其次是高碳产业工艺特征和能源结构特征,而经济结构对解释省级碳排放绩效区域差异的贡献有限。北方地区高碳产品生产份额高且工艺水平相对低,能源消费中极高的煤炭比例加重了负面影响,造成其二氧化碳排放绩效水平低,特别是华北地区;近年来东南沿海地区高碳产业也逐步增加,但由于其工艺先进,在一定程度上抵消了高碳产品份额高的负面影响;中西部地区目前高碳产品份额虽然低于东部地区,但工艺水平也低,造成了其低水平的二氧化碳排放绩效。由于各省历史发展、自然资源禀赋、区域分工角色等因素不同,且遵从经济宏观发展客观规律和经济区位理论,除了少数发达地区之外,中国其他区域短时间内很难改变其经济和能源结构,低碳政策制定的重点应放在提高高碳产业工艺水平方面。     

Emission factors of gaseous carbonaceous species from residential combustion of coal and crop residue briquettes

Experiments were performed to measure the emission factors (EFs) of gaseous carbonaceous species, such as CO₂, CO, CH₄, and non-methane volatile organic compounds (NMVOCs), from the combustion of five types of coal of varying organic maturity and two types of biomass briquettes under residential burning conditions. Samples were collected in stainless steel canisters and 2,4-dinitrophenylhydrazine (DNPH) cartridges and were analyzed by GC-FID/MS and HPLC, respectively. The EFs from crop residue briquette burning were generally higher than those from coals, with the exception of CO₂. The dominant NMVOC species identified in coal smoke were carbonyls (41.7%), followed by C2 unsaturated hydrocarbons (29.1%) and aromatics (12.1%), while C2 unsaturated hydrocarbons were the dominant species (68.9%) emitted from the combustion of crop residue briquettes, followed by aromatics (14.4%). A comparison of burning normal crop residues in stoves and the open field indicated that briquettes emitted a larger proportion of ethene and acetylene. Both combustion efficiency and coal organic maturity had a significant impact on NMVOC EFs from burning coal: NMVOC emissions increased with increasing coal organic maturity but decreased as the combustion efficiency improved. Emissions from the combustion of crop residue briquettes from stoves occurred mainly during the smoldering process, with low combustion efficiency. Therefore, an improved stove design to allow higher combustion efficiency would be beneficial for reducing emissions of carbonaceous air pollutants.     

PCDD/Fs emission, risk characterization, and reduction in China’s secondary copper production industry

Secondary copper production is one of the key polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) emission sources in China, but research and data on this issue are rare. In 2004, when the Stockholm Convention entered into force in China, PCDD/Fs emissions from secondary copper production contributed to 32.2% of the total release. In this paper, PCDD/Fs emission dynamics from secondary copper industry were discussed and cumulative risks were characterized. From 2004 to 2009, industrial policies played an indirect role in PCDD/Fs reduction, but its effects are still limited. The Yangtze River Delta, Pearl River Delta and central regions were among the top three of dioxin emissions from secondary copper production in China. Shanghai, Shandong, Zhejiang, and Jiangxi had comparatively higher accumulated risk and were recommended as the priority regions for promoting PCDD/Fs emission control in China. From 2009 to 2015, the PCDD/Fs emission dynamics in the secondary copper industry were presented through simulation. PCDD/Fs emission equations were established, resulting in the recommendation of control technology conversion rate at 30% for small scale smelters and 51%–57% for large and medium-sized enterprises in 2015. In conclusion, both indirect policy and direct control technology retrofitting should be integrated for more effective PCDD/Fs emission reduction in secondary copper industry.     

日本城市碳排放清单计算方法——以横滨市为例

日本是关注全球气候变化并作出行动最早的国家之一,根据其法律大中城市以上的行政区必须编制温室气体减排规划,包括排放清单、趋势预测、减排目标、措施及效果分析、方案实施与监督等。日本环境省为了帮助地方政府编制该规划,提供了城市层面的温室气体排放清单的编制方法指导。本文以横滨市为例,比较完整地介绍日本城市CO2排放清单编制基本方法,为我国城市碳排放清单编制提供参考。