Phyt'Eaux Cités: application and validation of a programme to reduce surface water contamination with urban pesticides

This paper presents first results of Phyt’Eaux Cités, a program put in place by the local water supply agency, the SEDIF (Syndicat des Eaux d’Ile-de-France), in collaboration with 73 local authorities, private societies and institutional offices (365 km²). The challenges included: measurement of the previous surface water contamination, control of urban pesticide applications, prevention of pesticide hazard on users and finally a overall reduction of surface water contamination. An inquiry on urban total pesticide amount was coupled with a surface water bi-weekly monitoring to establish the impact of more than 200 molecules upon the Orge River. For 2007, at least 4400 kg and 92 type of pesticides (essentially herbicides) were quantified for all urban users in the Phyt’Eaux Cités perimeter. At the outlet of the Orge River (bi-weekly sampling in 2007), 11 molecules were always detected above 0.1 μg L⁻¹. They displayed the mainly urban origin of pesticide surface water contamination. Amitrole, AMPA (Aminomethyl Phosphonic Acid), demethyldiuron, diuron, glyphosate and atrazine were quantified with a 100% of frequency in 2007 and 2008 at the Orge River outlet. During the year, peaks of contamination were also registered for MCCP, 2,4 MCPA, 2,4 D, triclopyr, dichlorprop, diflufènican, active substances used in large amount in the urban area. However, some other urban molecules, such as isoxaben or flazasulfuron, were detected with low frequency. During late spring and summer, contamination patterns and load were dominated by glyphosate, amitrole and diuron, essentially applied by cities and urban users. Both isoproturon and chlortoluron were quantified during autumn and winter months according to upstream agricultural practices. In conclusion, 3 years after the beginning of this programme, the cities reduced the use of 68% of the total pesticide amount. An improvement on surface water quality was found from 2008 and during 2009 for all pesticides. In particular, glyphosate showed a decrease of the load above 60% in 2008, partly related to the Phyt’Eaux Cités action.     

Chlorpyrifos acute exposure induces hyperglycemia and hyperlipidemia in rats

In this study we evaluated the hyperglycemic and hyperlipidemic effects of chlorpyrifos (CPF) after an acute exposure in rats. The mechanisms involved in hyperglycemia induced by CPF were studied. A single dose of CPF (50 mg kg⁻¹, subcutaneous, s.c.) was administered to overnight-fasted rats. Glucose and corticosterone levels, lipid status and paraoxonase (PON1) activity were determined in plasma of rats. Cardiovascular risk factors and the atherogenic index were calculated. Glycogen levels, tyrosine aminotransferase (TAT) and glucose-6-phosphatase (G6Pase) activities were determined in livers of rats. Cerebral acetylcholinesterase (AChE) activity was also determined. CPF caused an increase in glucose and glycogen levels as well as in TAT and G6Pase activities. The CPF exposure caused an increase in corticosterone levels, an inhibition of AChE activity and a reduction of PON1 activity. Regarding the lipid status, CPF induced an increase in triglycerides (TG) and low-density lipoprotein-cholesterol (LDL) levels and a decrease in high-density lipoprotein (HDL) levels associated with an increase of cardiovascular risk factors and the atherogenic index. The present study demonstrated that a single CPF administration caused hyperglycemia and hyperlipidemia in rats. The activation of the gluconeogenesis pathway, probably elicited by hypercorticosteronemia, is involved in the hyperglycemic effect of CPF in rats.     

Photocatalytic degradation of the fungicide Fenhexamid in aqueous TiO(2) suspensions: identification of intermediates products and reaction pathways

Liquid-chromatography interfaced with time-of-flight mass spectrometry (LC-TOF/MS) was used to separate and characterize the transformation products arising from TiO₂-photocatalytic degradation of the fungicide Fenhexamid (FEX) in aqueous solution under simulated solar irradiation. Prior to identification, irradiated solutions of FEX (10 mg L⁻¹) were concentrated by solid-phase extraction. Assignments of the mass spectra ions were aided by elemental composition calculations, comparison of structural analogues and available literature, and acquired knowledge regarding mass spectrometry of related heterocyclic compounds. The primary transformation intermediates identified were hydroxyl and/or keto-derivatives. Several positional isomers are typically produced as a consequence of the non-selectivity of the OH radical attack. Moreover, products resulted from the cleavage of the amide and NHdichlorophenol bonds were formed. Finally, cyclic - benzo[d]oxazole intermediates are also formed through an intramolecular photocyclization process and cleavage of halogen - carbon bond. In the case of the hydroxy and/or keto-derivatives, the generic fragmentation scheme obtained from the interpretation of the ESI-TOF-MS data cannot be diagnostic to precisely localize the position of the entering substituent on the FEX molecule, and thus to characterize all its possible oxygenated derivatives by assigning a plausible structure with confidence. On the basis of identified products different pathways of photocatalytic degradation of FEX were proposed and discussed.     

Comparison of concentrations and stereoisomer ratios of mecoprop, dichlorprop and metolachlor in Ontario streams, 2006-2007 vs. 2003-2004

Mecoprop, dichlorprop and metolachlor concentrations and enantiomer signatures were determined in Ontario streams in 2006-2007 and compared to results from 2003 to 2004. Median concentrations of dichlorprop and metolachlor were not significantly different between the two campaigns, but mecoprop was higher in 2006-2007. Concentrations of mecoprop and dichlorprop in Lake Ontario surface water were 1-2 orders of magnitude lower than stream averages. Enantiomer fractions (EFs) > 0.5 of mecoprop in high-concentration stream water samples during 2006-2007 were related to replacement of racemic mecoprop by single (+) enantiomer mecoprop-P after 2004. EFs <0.5 in low-concentration samples suggested enantioselective degradation and/or interconversion. Metolachlor profiles were expressed as SF, the fraction of herbicidally active/(active + inactive) stereoisomers. Samples with higher concentrations of metolachlor had SFs similar to S-metolachlor which is enriched in the active stereoisomers. Low concentrations were associated with lower and more variable SFs, suggesting mixed input of racemic and S-metolachlor or stereoselective degradation.     

Developments in application technology

Pesticides are applied in diverse situations, but in each, careful consideration has to be given to applying the optimum dosage accurately with minimal exposure of the active substance to the operator. Emphasis is given to ways in which application equipment, suitable for both small-scale and large farms has been adapted to meet health and safety requirements. New developments in nozzle design provide users with greater flexibility in optimising pesticide delivery, while minimising spray volumes. Changes in equipment design that influence dose transfer are discussed.     

Influence of fipronil compounds and rice-cultivation land-use intensity on macroinvertebrate communities in streams of southwestern Louisiana, USA

Laboratory tests of fipronil and its degradation products have revealed acute lethal toxicity at very low concentrations (LC50) of <0.5 microg/L to selected aquatic macroinvertebrates. In streams draining basins with intensive rice cultivation in southwestern Louisiana, USA, concentrations of fipronil compounds were an order of magnitude larger than the LC50. The abundance (rho=-0.64; p=0.015) and taxa richness (r2=0.515, p<0.005) of macroinvertebrate communities declined significantly with increases in concentrations of fipronil compounds and rice-cultivation land-use intensity. Macroinvertebrate community tolerance scores increased linearly (r2=0.442, p<0.005) with increases in the percentage of rice cultivation in the basins, indicating increasingly degraded stream conditions. Similarly, macroinvertebrate community-tolerance scores increased rapidly as fipronil concentrations approached about 1 microg/L. Pesticide toxicity index determinations indicated that aquatic macroinvertebrates respond to a gradient of fipronil compounds in water although stream size and habitat cannot be ruled out as contributing influences.     

Estimation of emission fluxes from a horizontal flux budget method, exemplified with determination of pesticide volatilization

The paper describes an experimental set-up designed to measure the volatilization of different pesticides after application under full-scale field conditions. The pesticides were sprayed around the circumference of a circle and measurements of meteorology and air concentrations of pesticides were taken in the centre of the circle. The paper describes how the dimensions like the radius of the circle and height of the mast in the experimental set-up are found from theoretical considerations. A method to increase the confidence of the flux calculations is described. It utilizes that several substances were applied simultaneously and that a certain parameter in the fitted concentration profiles depends on turbulence only and thus have the same value for all substances. The design was used during two campaigns, conducted on the same location, one during fall on bare soil and one in spring on a barley crop.     

Effects of sediment quality on macroinvertebrates in the Sunraysia region of the Murray-Darling Rivers, Australia

A field-based microcosm approach was tested to identify deterioration of sediment quality in waterways using freshwater macroinvertebrates. The method can potentially identify the nature of contaminants based on species-specific responses. Sediments were collected from the Murray and Darling Rivers and irrigation drains within the Sunraysia region of south-eastern Australia and compared to non-polluted reference sediment. Clean sediments were also spiked with fertiliser to test whether nutrients affected the aquatic fauna. Seven of the eight sediments from the Sunraysia region had a negative impact on the macroinvertebrates, in particular sediment from the Darling River, which supported an impoverished fauna. Three species of chironomid showed varied responses to sediment quality and, although it was hypothesised that nutrients may have impacted on the macroinvertebrate fauna, the results suggest that other pollutants are also involved. The field-based microcosm method proved effective for determining the impact of sediment quality on indigenous macroinvertebrates.     

Dynamic modeling of organophosphate pesticide load in surface water in the northern San Joaquin Valley watershed of California

The hydrology, sediment, and pesticide transport components of the Soil and Water Assessment Tool (SWAT) were evaluated on the northern San Joaquin Valley watershed of California. The Nash-Sutcliffe coefficients for monthly stream flow and sediment load ranged from 0.49 to 0.99 over the watershed during the study period of 1992-2005. The calibrated SWAT model was applied to simulate fate and transport processes of two organophosphate pesticides of diazinon and chlorpyrifos at watershed scale. The model generated satisfactory predictions of dissolved pesticide loads relative to the monitoring data. The model also showed great success in capturing spatial patterns of dissolved diazinon and chlorpyrifos loads according to the soil properties and landscape morphology over the large agricultural watershed. This study indicated that curve number was the major factor influencing the hydrology while pesticide fate and transport were mainly affected by surface runoff and pesticide application and in the study area.     

Dioxin- and POP-contaminated sites—contemporary and future relevance and challenges

BACKGROUND, AIM AND SCOPE: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation. MAIN FEATURES: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites. RESULTS: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised. DISCUSSION: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals. CONCLUSIONS: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future. RECOMMENDATIONS AND PERSPECTIVES: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.