油气浓度对半开口管道爆炸超压特性与火焰行为的影响

为了研究油气浓度对半开口管道爆炸超压特性与火焰行为的影响,建立半开口透明管道实验台架,采用5种不同初始油气浓度,进行了一系列油气爆炸对比实验。研究结果表明:油气浓度对油气爆炸超压峰值以及升压速率有显著影响,二者都呈现随浓度的增加先增大后减小的变化规律;油气浓度对火焰锋面传播速度有着显著影响,在当量浓度比下,火焰锋面的传播速度最大,并且火焰锋面的传播距离也最远;管道内的火焰行为可以分为4个阶段;油气浓度对火焰传播形态以及传播速度有明显的影响,对火焰传播形态的影响主要体现在破坏变形以及管道外爆炸阶段,随着浓度增加,爆炸半径先增大后减小,火焰传播速度呈现相同的变化规律。     

障碍物对油气-空气混合气体泄压爆炸火焰传播特性影响

为了研究障碍物对油气泄压爆炸火焰传播特性的影响规律,进行了不同数量障碍物工况下的对比实验,并利用纹影仪和高速摄影仪记录了火焰传播过程,针对障碍物对火焰形态、火焰锋面位置及火焰传播速度的影响规律进行了研究,结果表明:圆柱体障碍物会导致油气泄压爆炸火焰形态产生褶皱和弯曲变形,诱导层流火焰向湍流火焰转变,加速火焰的传播,对油气泄压爆炸火焰的初始传播形态有显著影响;随着障碍物数量的增多,火焰锋面传播距离点火端的最大距离增大,但到达最远距离的时间减少;障碍物能够增强火焰的传播速度,尤其对障碍物下游火焰影响最为显著,随着障碍物数量的增多,火焰传播的最大速度也随之增大,但达到最大火焰传播速度的时间却随之减少;障碍物的存在增大了油气泄压爆炸过程外部爆炸压力,并且随着障碍物数量的增多,外部爆炸压力峰值增长幅度增大。     

丙烷/空气拉伸火焰传播稳定性实验研究

为了揭示空气中丙烷火焰传播特性,利用纹影系统记录了预混气体小能量点火条件下火焰形成与传播过程,得到了火焰表面的微观结构特征,分析了混合气体火焰的稳定性及其影响因素。结果表明:丙烷/空气混合物火焰发展过程及其表面微观特征与浓度直接相关;当混合物浓度接近爆炸上下限时,火焰扩展速率整体不大于0.5 m/s,燃烧区域向上漂浮,浮力成为影响火焰失稳的主导因素;当混合物浓度靠理论配比时,火焰呈规则球形扩展,火焰稳定性按照先减弱后增强的趋势发展,火焰表面褶皱的形成及演化规律是热扩散不稳定性和流体力学不稳定性共存与竞争的作用结果。     

不同通风条件下柴油池火的实验研究

为了分析不同通风条件对柴油池火燃烧特性及引燃特性的影响,进行205 mm带水垫层柴油池火的引燃实验,通过对池火燃料的质量损失速率、火焰高度、温度及热辐射等的监测,分析通风环境中柴油池火的热传递规律。结果表明:当风速为0.5 m/s时,火灾进入旺盛阶段的时间提前,火焰平均温度最高;当风速为1 m/s时,风速的增加导致油池火的质量损失速率增加,位于主火源下风向的待引燃火源获得的热辐射通量增大,火灾旺盛阶段火焰的平均温度降低,火焰高度降低,下风向相邻油盘引燃的时间提前;1 m/s情况下,205 mm带水垫层柴油池火的安全间距需增加到1D以上;通风环境对池火发展及蔓延的影响是显著的,应适当加大下风向可燃物的安全间距,合理选择通风排烟风速,优化火灾应急救援策略。     

污水处理厂中有机磷酸酯的研究进展

有机磷酸酯(OPEs)作为阻燃剂和增塑剂被广泛用于建筑、电子、化学和纺织等行业中。由于有机磷酸酯大多以物理方法掺加于产品中,更易被释放进入环境中。有机磷酸酯具有神经毒性、致癌性和基因毒性,关于有机磷酸酯产生、迁徙和削减的研究受到了学界的广泛注意。污水处理厂作为地表水环境中污染物的重要来源,在有机磷酸酯进入环境的过程中发挥了重要作用。本文总结了各国污水处理厂中有机磷酸酯研究现状,随着技术的发展被监测的有机磷酸酯种类越来越多;欧洲国家污水中有机磷酸酯检出的最高浓度普遍高于其他国家和地区;极性有机磷酸酯更倾向于转移至污水中,非极性的更倾向于吸附到污泥中;氯代有机磷酸酯普遍去除率很低,有的经过污水处理工艺反而增加,烷基和芳基有机磷酸酯有较高的去除率。     

Effects of ignitors and turbulence on dust explosions

The aim of this work is in an attempt to increase the understanding of the acting behaviour of pyrotechnic ignitors and their effects on confined dust explosions. Flame visualization has shown that pyrotechnic ignitors can initiate an explosion by instantaneous jet-like volumetric and/or multipoint ignition. Hence, the rate of pressure rise and also the apparent burning velocity will be increased to some extent, depending on the ignitor energy and the reactivity of the mixtures. The ignitor effect is more important for the early stages of flame propagation and would be more significant in small explosion chambers. Thus, for dust explosion tests with various purposes, use of pyrotechnic ignitors should be made carefully, and the ignitor effect must be accounted for in the data interpretation. Turbulence induced by dust dispersion is a dominant factor in affecting dust explosions. At different ignition delays, however, the turbulence influence will be coupled with that of ignitors. This complicates further the interpretation of explosion data measured under turbulent conditions.     

敏感性分析在燃烧毒物和自由基生成机理研究中的作用

针对燃料氧化的详细/半详细化学反应动力学机理，采用定量研究模型与出现在模型中各种参量之间关系的系统化方法--敏感性分析法，研究各基元反应对燃料过程中毒物和自由基生成的影响系数随时间的变化关系，为反应设计提供理论指导。     

Characterization of air emissions and residual ash from open burning of electronic wastes during simulated rudimentary recycling operations

Air emissions and residual ash samples were collected and analyzed during experiments of open, uncontrolled combustion of electronic waste (e-waste), simulating practices associated with rudimentary e-waste recycling operations. Circuit boards and insulated wires were handled separately to simulate processes associated with metal recovery. The average emissions of polychlorinated dibenzodioxins and dibenzofurans (PCDD/PCDFs) were 92 ng toxic equivalency (TEQ)/kg [n = 2, relative standard deviation (RSD) = 98%] and 11 900 ng TEQ/kg (n = 3, RSD = 50%) of the initial mass of the circuit boards and insulated wire, respectively. The value for the insulated wire is about 100 times higher than that for backyard barrel burning of domestic waste. The emission concentrations of polybrominated dibenzodioxins and dibenzofurans (PBDD/PBDFs) from the combustion of circuit boards were 100 times higher than for their polychlorinated counterparts. Particulate matter (PM) sampling of the fly ash emissions indicated PM emission factors of approximately 15 and 17 g/kg of the initial mass for the circuit boards and insulated wire, respectively. Fly ash samples from both types of e-waste contained considerable amounts of several metallic elements and halogens; lead concentrations were more than 200 times the United States regulatory limits for municipal waste combustors and 20 times those for secondary lead smelters. Leaching tests of the residual bottom ash showed that lead concentrations exceeded U.S. Environmental Protection Agency landfill limits, designating this ash as a hazardous waste.     

KZNJ-1型高效口罩效率检测装置的研制

本文详细介绍了KZM-1型高效口罩效率检测装置的研制背景、检测原理和装置性能，实验研究结果表明：此检测装置的各项性能指标均达到国家标准GB19083和GB2626的要求。     

Emission inventory of deca-brominated diphenyl ether (DBDE) in Japan

Atmospheric emissions of deca-brominated diphenyl ether (DBDE) in Japan were estimated based on the material flow of DBDE products and their emission factors. In 2002, the demand for DBDE in Japan was 2200 ton/year and the stock level was about 60 000 ton. The DBDE flow into the waste stream was estimated to be about 6000 ton/year and the flow out through second-hand product exports was more than 700 ton/year. Home appliance recycling facilities dismantle and crush domestic wastes containing about 600 ton of DBDE annually. Material recycling of crushed plastics is not commonly practiced as yet. Emission factors from plastics processing (2 × 10⁻⁹–1 × 10⁻⁷), textile processing (9 × 10⁻⁷), home appliance recycling (8 × 10⁻⁹–5 × 10⁻⁶), and waste incineration (1 × 10⁻⁷–2 × 10⁻⁶) were estimated using field measurement data. The DBDE emission rate through house dust during the service life of final products (2 × 10⁻⁷–9 × 10⁻⁷ per year) was estimated using the DBDE concentration in dust and the amount of dust in used televisions. Emission factors from previous studies were also used. The estimated total DBDE emission was 170–1800 kg/year. These results suggest the necessity of characterizing emissions during the service life of products, which is essential information for formulating an appropriate e-waste recycling strategy.