A combination line transect and capture-recapture sampling model for multiple observers in aerial surveys

We present a robust sampling methodology to estimate population size using line transect and capture-recapture procedures for aerial surveys. Aerial surveys usually underestimate population density due to animals being missed. A combination of capture-recapture and line transect sampling methods with multiple observers allows violation of the assumption that all animals on the centreline are sighted from the air. We illustrate our method with an example of inanimate objects which shows evidence of failure of the assumption that all objects on the centreline have probability 1 of being detected. A simulation study is implemented to evaluate the performance of three variations of the Lincoln-Petersen estimator: the overall estimator, the stratified estimator, and the general stratified estimator based on the combined likelihood proposed in this paper. The stratified Lincoln-Petersen estimator based on the combined likelihood is found to be generally superior to the other estimators.     

Calculation of Entrainment in Density Jumps

The density jump in a two-layer channel flow of miscible fluids, in which one of the layers is infinitely deep and at rest, is analyzed using the momentum flux and mass flux conservation equations. The analysis yields simple equations relating the heights upstream and downstream of the jump with the upstream Froude number and the rate of entrainment into the moving layer, as well as a relation between the maximum possible entrainment and the upstream Froude number. The analysis also shows that when the flow down-stream of the jump is controlled by an obstruction or a contraction, the entrainment rate into the jump depends solely on the dimensionless obstruction height contraction ratio and the upstream Froude number.     

安全填埋场粘土衬层渗透性的试验研究

工业危险废物填埋场为防渗透,要求两层粘土的渗透系数k<1×10-7cm/s。为满足设计要求,沈阳工业危险废物填理场通过实验确定与其相关的施工参数。如铺土厚度,碾压遍数,碾压机具,粘土的最优含水量,干密度。同时按设计要求测试碾压过的场地渗透系数。     

SPATIAL AND TEMPORAL INFLUENCE OF SOIL FROST ON INFILTRATION AND EROSION OF SAGEBRUSH RANGELANDS1

ABSTRACT: Soil infiltration capacity and interrill erosion are significantly influenced by soil frost on western rangelands which are characterized by cold winters and numerous freeze-thaw cycles. However, little is known about the variable influence of this phenomenon. Infiltration and interrill erosion were measured within a sagebrush-grass plant community during the winter, spring, and summer of 1989. Significant spatial and temporal differences in infiltration capacity and interrill erosion were found for shrub coppice dune and dune interspace soils. Infiltration was generally higher for coppice dune soils compared to interspace soils throughout the year. Infiltration capacity for both soils was lowest early in the year when the soil was frozen or saturated, then increased as the soil dried in the spring and summer. Interrill erosion was consistently lower for coppice dune soils compared to interspace soils. Erosion from interspace soils was greatest during a 19-day period in late winter characterized by diurnal freeze-thaw cycles, saturated surface soil conditions, and soil slaking.     

Use of sequential sampling of amphipod abundance to classify the biotic integrity of acid-sensitive lakes

A sequential sampling program using previously published zoobenthos data is described for ubiquitous, cost-effective biomonitoring of the effects of lake acidification. Spring densities of the littoral amphipodHyalella azteca are quantitatively sorted into five abundance catagories. An essential step in the a priori definition of decision criteria is the stratification of proportional densities per unit macrophyte biomass in relation to aqueous total phosphorus concentrations. Density rankings were related to lake acidity and to detailed lake-specific information on patterns ofHyalella life history and acid tolerance. Incorporation ofHyalella abundance as a potential metric for the assessment of the biological integrity of acid-sensitive waters is recommended. The temporal integration of transient changes in spring meltwater chemistry is an important rationale for the development of such biomonitoring procedures.     

A method for prediction of extent of microbial pollution of seawater and carrying capacity of beaches

The increase in the number of tourists visiting a coast is desired by most of the countries for economic reasons. However, this increase in tourism may cause pollution of the sea. This can be only avoided by proper planning and by predicting the carrying capacity of the coast in terms of sea pollution. This is especially important for developing countries where part of the wastewater is discharged without any treatment into the sea.In the present study the beaches were classified according to their use — and consequently the amount of waste discharged into the sea — into four groups: (1) coasts that are used only for swimming and recreational purposes; (2) coasts used simultaneously for dwelling, swimming, and recreational purposes; (3) coasts along which only dwellings exist; and (4) natural and man-made harbors, i.e., coasts used as shelters. During the survey,40,320 observations were made between December 1985 and February 1988 to determine the effect of the number of tourists on seawater quality. The results obtained were analyzed by a multilinear regression program to obtain an empirical equation giving the extent of the sea pollution in terms of coliform concentration as a function of population density and some other environmental factors.The equations derived in this study enable the determination of the carrying capacity of a beach in terms of pollution as well as the expected degree of pollution corresponding to a given population density. Furthermore, it allows the prediction of the extra carrying capacity that can be obtained by improving the waste-disposal conditions.     

Bandwidth determination for kernel density analysis of wildfire events at forest sub-district scale

Forest fire is regarded as one of the most significant factors leading to land degradation. While evaluating fire hazard or producing fire risk zone maps, quantitative analyses using historic fire data is often required, and during all these modeling and multi-criteria analysis processes, the fire event itself is taken as the dependent variable. However, there are two main problematic issues in analyzing historic fire data. The first difficulty arises from the fact that it is in point format, whereas a continuous surface is frequently needed for statistically analyzing the relationship of fire events with other factors, such as anthropogenic, topographic and climatic conditions. Another, and probably the most bothersome challenge is to overcome inaccuracy inherent in historic fire data in point format, since the exact coordinates of ignition points are mostly unknown. In this study, kernel density mapping, a widely used method for converting discrete point data into a continuous raster surface, was used to map the historic fire data in Mumcular Forest Sub-district in Mu?la, Turkey. The historic fire data was transferred onto the digital forest stand map of the study area, where the exact locations of ignition points are unknown; however, the exact number of ignition points in each compartment of the forest stand map is known. Different random distributions of ignition points were produced, and for each random distribution, kernel density maps were produced by applying two distinct kernel functions with several smoothing parameter options. The obtained maps were compared through correlation analysis in order to illustrate the effect of randomness, choice of kernel function and smoothing parameter. The proposed method gives a range of values rather than a single bandwidth value; however, it provides a more reliable way than comparing the maps with different bandwidths subjectively by eye.     

Wood Density as a Conservation Tool: Quantification of Disturbance and Identification of Conservation‐Priority Areas in Tropical Forests

Abstract: Inventories of tree species are often conducted to guide conservation efforts in tropical forests. Such surveys are time consuming, demanding of expertise, and expensive to perform and interpret. Approaches to make survey efforts simpler or more effective would be valuable. In particular, it would be good to be able to easily identify areas of old‐growth forest. The average density of the wood of a tree species is closely linked to its successional status. We used tree inventory data from eastern Borneo to determine whether wood density can be used to quantify forest disturbance and conservation importance. The average density of wood in a plot was significantly and negatively related to disturbance levels, with plots with higher wood densities occurring almost exclusively in old‐growth forests. Average wood density was unimodally related to the diversity of tree species, indicating that the average wood density in a plot might be a better indicator of old‐growth forest than species diversity. In addition, Borneo endemics had significantly heavier wood than species that are common throughout the Malesian region, and they were more common in plots with higher average wood density. We concluded that wood density at the plot level could be a powerful tool for identifying areas of conservation priority in the tropical rain forests of Southeast Asia.     

林地变为玉米地后土壤轻质部分有机碳的13C/12C比值的变化

为了观察森林生态系统转变为农业生态系统后土壤有机碳的变化，选择贵州喀斯特森林区为研究对象，采集了林地和邻近的玉米地土壤剖面样品，并按土壤密度把土壤样品分级成轻质部分和重质部分。林地和玉米地土壤均为石灰土。玉米地土壤风化相对较强，淋溶严重而贫瘠，并且所返还的植物残留物数量很少。实验结果表明，林地土壤轻质部分的(13C值明显低于重质部分，而玉米地土壤轻质部分的(13C值明显高于重质部分，说明植物残留物首先进入到轻质部分。然而，由于当地的耕作习惯，输入到玉米地土壤轻质部分的玉米残留物的数量很少，只有48%，这是初级生产力低下的主要原因。     

Nest-Site Selection by Black Sparrowhawks Accipiter melanoleucus: Implications for Managing Exotic Pulpwood and Sawlog Forests in South Africa

This study provides timber growers with silvicultural guidelines for establishing and maintaining nest-tree habitat for native black sparrowhawks (Accipiter melanoleucus) in commercial planted forests in South Africa. In this country, exotic eucalypts and pines are planted principally for pulpwood and sawlog production. Nineteen nests were sampled in indigenous forests and 58 nests in exotic forests. Although mean nest heights differed between indigenous and exotic trees, in all trees, nests were positioned, on average, at 64% of tree height. Black sparrowhawks nested near stand edges, probably seeking a compromise between nesting adjacent to open hunting habitat and selecting an insulated tree from within the forest. Black sparrowhawks nested in tall trees ( X- = 18-33 m for different tree species classes) with a large diameter (>60 cm). Unfortunately, the South African pulpwood and sawlog industry employ short rotations (<16 years) and high tree densities (>700 trees/ha) that do not allow the trees to attain the characteristics suitable for black sparrowhawk nesting sites. Eucalypt and pine nest stands must be of 25 x 25 m minimum size and incorporate 10 trees at minimum heights of 21 and 18 m and diameters of 37 and 35 cm, respectively. If such nest-tree stands are set aside as islands in a sea of commercial forests, and black sparrowhawks and other forest raptors nest in them, timber growers will improve the tree-nesting raptor diversity of planted forests. If, however, these raptors prey upon species of conservation importance, the management recommendations could be reversed to limit the potential for predation.