混凝-氧化法处理印染废水

采用混凝 氧化法对印染废水进行处理 ,得出最佳混凝条件及氧化条件。实验结果表明 ,该法可使印染废水的CODCr与色度去除率分别达到 90 .2 %和 99.1%。该方法具有去除率高、操作方便、设备简单、不产生二次污染等优点。     

SO2的气相光催化氧化及催化剂的失活和再生研究

在模拟大气环境中，紫外光照射以及纳米TiO2光催化剂的作用下，气相无机污染物SO2被完全氧化为SO2或H2SO4。本文提出了SO2的非均相光催化氧化机理，并得出光催化反应速率符合一级动力学过程；经过连续使用之后，TiO2的光催化活性降低，最后活性消失；经过水洗之后，失活的TiO2可以得到再生。失活的TiO2和新鲜的TiO2的IR和XPS光谱差异表明，失活的TiO2表面存在H2SO4，其被认为是使催化剂失活的成分。     

低浓度硫化氢废气的液相催化氧化法净化实验研究

针对H2S浓度为750~1500mg/m3的气体的液相催化氧化技术进行了动力学实验研究。配制了以铁基离子作为主催化剂的复合吸收净化溶液,同时加入稳定剂和表面活性剂提高催化剂在碱性吸收溶液的活性。分别考察了原料气中H2S、O2含量以及吸收液中催化剂离子浓度、温度等因素对吸收速率的影响;确定了较为理想的吸收操作条件并获得了较好的吸收净化效果;饱和吸收液易于再生,净化性能恢复良好,可重复使用。     

粉煤灰-H2O2催化氧化水中对氨基苯酚的试验研究

研究了利用电厂粉煤灰作为非均相催化剂,催化H2O2氧化对氨基苯酚(PAP),讨论了各种因素对PAP去除率的影响.结果表明,在30℃,pH=1.5,H2O2和PAP的起始浓度分别为0.50 mol/L和0.10 mol/L,反应时间为100min,粉煤灰用量为6.0%,搅拌速度为1000r/min的条件下,粉煤灰具有良好的催化活性,能有效地催化H2O2氧化PAP,PAP的去除率可达81%左右.该法可用于预处理含PAP的工业废水.     

药物合成废水处理工程

针对氯唑沙宗、枸橼酸莫沙必利化学原料药合成过程中产生的有机废水浓度高、成分复杂及处理难度大等特点（COD高达80 000 mg/L左右）,采用催化氧化-生物化学方法,试验研究了药物合成废水处理.试验结果表明,该技术对合成废水的COD去除率可达98%,SS去除率可达96%,色度降到50倍左右,其去除率约为98%.该系统运行费用为0.4～0.5元/m^3废水.经过3个月的工程运行,表明催化氧化-生物化学处理药物合成废水系统是一种高效率、低能耗、运行管理方便、经济可行的处理方法.处理类似制药废水这样的高浓度有机废液,上述废水处理工艺具有广阔的应用前景.     

水解-酸化法在味精废水处理中的应用

结合江苏南通天字味精厂的工程实例,介绍了以水解-酸化法为主体的味精废水处理工艺的原理、特点和应用中注意的问题.该工艺运行结果表明:在治理味精废水方面具有较佳的耐冲击性能;出水稳定达标;操作运行管理方便;投资成本和运行费用均较低.从其优势看有良好的应用前景.     

光催化氧化技术的研究现状及发展趋势

光催化氧化技术是近几十年来发展起来的一项深度氧化(AOP)污染治理新技术,因其具有降解彻底、无二次污染等优点而倍受人们的瞩目.本文就对它的研究现状和以后的发展做一综述.     

A/A/O微曝氧化沟处理城市污水的工程设计

以某日处理量为80 000 m3城市污水处理厂为例,介绍了A/A/O微曝氧化沟工艺的设计思路及参数选择,能够满足设计要求,且可信度高,有实用参考价值.     

Oxidation of polycyclic aromatic hydrocarbons by fungal isolates from an oil contaminated refinery soil

BACKGROUND AND OBJECTIVE: Indigenous soil microorganisms are used for the biodegradation of petroleum hydrocarbons in oily waste residues from the petroleum refining industry. The objective of this investigation was to determine the potential of indigenous strains of fungi in soil contaminated with petroleum hydrocarbons to biodegrade polycyclic aromatic hydrocarbons (PAH). MATERIALS AND METHODS: Twenty one fungal strains were isolated from a soil used for land-farming of oily waste residues from the petrochemical refining industry in Singapore and identified to genus level using laboratory culture and morphological techniques. Isolates were incubated in the presence of 30 mg/L of phenanthrene over a period of 28 days at 30 degrees C. The most effective strain was further evaluated to determine its ability to oxidise a wider range of PAH compounds of various molecular weight i.e acenaphthene, fluorene, fluoranthene, chrysene, benzo(a)pyrene and dibenz(ah)anthracene RESULTS AND DISCUSSION: After 28 days of incubation, 18 of the 21 fungal cultures were capable of oxidising over 50% of the phenanthrene present in culture medium, relative to abiotic controls. Fungal isolate, Penicillium sp. 06, was able to oxidise 89% of the phenanthrene present. This isolate could also oxidise more than 75% of the acenaphthene, fluorene and fluoranthene after 30 days of incubation. However, the oxidation of high molecular weight PAH i.e. chrysene, benzo(a)pyrene and dibenz(ah)anthracene by the Penicillium sp. 06 isolate was limited, where the extent of oxidation was inversely proportional to PAH molecular weight. CONCLUSIONS: Fungal isolate, Penicillium sp. 06, was effective at oxidising a range of PAH in petroleum contaminated soils, but higher molecular weight PAH were more recalcitrant. RECOMMENDATIONS AND OUTLOOK: There is potential for the re-application of this fungal strain to soil for bioremediation purposes.