人工湿地-氧化塘工艺组合对氮和磷去除效果研究

本文在小试规模上，研究了下行流湿地、推流床湿地、氧化塘和兼性塘四种处理单元的四种工艺组合对氮、磷的去除效果，研究结果表明：下行流湿地 氧化塘工艺组合具有较好的充氧效果，推流床湿地后置也可以提高出水的溶解氧。四种工艺组合对离子和TP、IP的去除无显著差异。人工湿地中硝化作用的发生有利于NH^ 4f-N的去除，增加氧化塘可以提高系统的硝化能力，但同时也会增加出水中的N0^-3-N浓度。     

高铁酸盐氧化絮凝去除含油污水中的油

油田产出的油、水经分离后会产生大量的含油污水,选用高铁酸钾对污水进行处理已成为人们关注的一个问题。用荧光比色法测定非均相固-液悬浮体系中油含量的实验证明:(1)高铁酸盐在含油污水中的初始反应速度快,可将大部分有机物氧化;(2)氧化法处理含油污水受多种因素的影响;(3)高铁直接氧化和芬顿氧化法均可比较彻底地处理油田含油污水。用高铁氧化法处理含油污水技术上很有发展前景,各种浓度的污水经处理后都可达到国家排放标准。     

Electrochemical or UV-photochemical oxidation of industrial wastes containing polar aromatic sulphonates

BACKGROUND AND INTENTION: Aromatic sulphonates other than surfactants and their hydroxy and amino-derivatives are important intermediates for the production of azo dyes. Their production on a large scale can be detrimental for the environment, if the by-products of their synthesis are not disposed of appropriately. An industrial waste, the organic components of which were mainly amino and hydroxy-substituted aromatic sulphonates, seriously endangers the environment close to an dismissed Italian industrial site. Inorganic sulphates and chlorides contained in the waste seriously hinder its disposal by incineration, since they corrode furnace walls. In this work, preliminary exploration of aqueous-phase electrochemically and photochemically induced oxidation techniques have been performed as possible alternatives to incineration. METHODS: Electrochemically-induced oxidation was experimented on individual aromatic sulphonates and on an industrial waste by electrolysing them between smooth platinum electrodes at low temperature (5 degrees C) and high current densities (0.4 A/cm2) with aqueous 0.5 M NaHSO4 electrolyte. Photochemically-induced oxidation was performed by irradiating individual aromatic sulphonates or industrial waste with a 500 W mercury lamp in the presence of sodium peroxydisulphate. RESULTS AND DISCUSSION: After 200 min electrodegradation, 90% of the original compounds disappeared, while 50% Total Organic Carbon (TOC) of an industrial waste was removed from solution after 10 hours. After 180 min UV-photodegradation, 90% of two test aromatic sulphonates disappeared, while 65% of TOC of industrial waste was removed after 5 hours. CONCLUSIONS: Two methods, electrochemical and UV-persulphate oxidation of an industrial waste, were used in order to propose a disposal procedure alternative to incineration. Electrodegradation with smooth Pt anode in 0.5 M NaHSO4 at 5 degrees C halved TOC concentration within 10 hours, while persulphate-assisted UV-photochemical oxidation with a 500 W high pressure Hg lamp abated two-thirds of TOC concentration after 5 hours. Energetic consumption of electrodegradation was 0.33 kWh/g TOC, while that of photooxidation was larger than 2 kWh/g TOC. Although both techniques can be considered efficient from a purely chemical point of view, since both are capable of wet-oxidising the aromatic sulphonates and the industrial waste, electrodegradation seems more promising than a photochemical degradation if economical considerations are also taken into account. Considering also that neither cell design nor catalyst were optimised in this preliminary study, the energy yield of electrodegradation seems likely to be largely improved.     

Aniline degradation by electrocatalytic oxidation

The degradation of aniline solution in alkaline medium of pH 11.0 by electrocatalytic oxidation has been studied using an electrochemical reactor containing a SnO₂–Sb₂O₃–PtO anode and a Ti cathode, both of 54 cm² area. Hydroxyl radicals (HO^√) are produced at the anode, being tested with the trace catcher salicylic acid and phenol by spectrophotometery and high performance liquid chromatography. Intermediates dianiline, 4-anilino phenol and azobenzol were detected by gas chromatography–mass spectrometry. The existence of HO^√ produced in the aniline degradation was assayed with scavenger tertiary butanol. The results showed that electrocatalytic oxidation is an effective process for the degradation of aniline. A general reaction pathway that accounts for aniline degradation to CO₂ involving those intermediates is proposed.     

生物接触氧化法在医院污水处理中的应用与管理

针对医院污水中含有大量致病微生物和有机污染物的特点，选用生物接触氧化-沉淀-加氯消毒处理工艺流程及科学的调试、运转管理模式后，不仅能提高污水处理效果，还能大大降低运行成本，并最终使出水各项指标达到国家规定的排放标准。     

纳米材料催化净化燃煤烟气中NOx的新技术

现有的氮氧化物治理技术，虽已取得了一些成果，但都存在一定缺点。通过综合分析催化剂在氮氧化物治理中的应用研究现状，提出以介孔沸石分子筛为载体，以纳米过渡金属Fe、纳米CaO等为助催化剂，纳米TiO2为主催化剂，进行光催化氧化反应降解燃煤烟气中氮氧化物的研究方法，并从分子反应机理上进行了分析。该技术不仅具有高效经济的工业应用前景，而且对保护大气环境具有重要意义。     

Treatment of desizing wastewater from the textile industry by wet air oxidation

ＩｎｔｒｏｄｕｃｔｉｏｎＷａｓｔｅｗａｔｅｒｄｉｓｃｈａｒｇｅｄｆｒｏｍｔｅｘｔｉｌｅｄｅｓｉｚｉｎｇ ｐｒｏｃｅｓｓｅｓｉｓｃｈａｒａｃｔｅｒｉｚｅｄｂｙｉｔｓｖｅｒｙｈｉｇｈｃｈｅｍｉｃａｌｏｘｙｇｅｎｄｅｍａｎｄ(ＣＯＤＣｒ)ａｎｄｉｓｏｎｅｏｆｔｈｅｍｏｓｔｄｉｆｆｉｃｕｌｔｔｅｘｔｉｌｅｗａｓｔｅｗａｔｅｒｔｏｔｒｅａｔ.Ｔｈｅｄｅｓｉｚｉｎｇｗａｓｔｅｗａｔｅｒｆｒｏｍｎａｔｕｒａｌｆｉｂｒｅ ｐｒｏｃｅｓｓｉｎｇｏｐｅｒａｔｉｏｎｓｍａｉｎｌｙｃｏｎｔａｉｎｓｓｔａｒｃｈ ,ｇｌｕｃｏｓ…     

混凝-氧化-微电解-过滤法处理维生素B1生产废水

针对维生素B1生产废水成分复杂、难于生化降解、水质不稳定、固体悬浮颗粒含量高的特点，采用混凝-氧化-微电解-过滤的方法进行处理。当混凝剂三氯化铁的投加量为150mg／L，氧化剂次氯酸钠使用量为40mL／L，微电解反应器内pH为3～5，反应时间为50min，混合滤料滤柱停留时间为35min时，出水TOC、COD、色度等指标均达到了GB8978-1996所规定的二类水质的要求。     

烟气中SO_2和NO_2相互作用的研究

由于SO2和NO2都是具有氧化还原能力的气体,通过热力学计算得出SO2和NO2有相互作用的可能,通过实际测量已知浓度的SO2和NO2混合气体,结果表明SO2和NO2在气相中较短时间内发生氧化还原反应可忽略不计,在湿法同时脱硫脱硝工艺中它们之间的一系列反应是在液相中进行的。可以用碘量法和盐酸萘乙二胺分光光度法分别测量混合烟气中的SO2和NO2。实验结论将为湿法同时脱硫脱硝工艺提供一定的理论基础。