响应面法优化预氧化强化混凝处理铁锰地下水

以KMnO_4为氧化剂,Al_2(SO_4)_3·18H_2O为混凝剂,含铁锰离子地下水为模拟用水,考察预氧化强化混凝法的效果。利用响应面设计试验,分析氧化剂投加量、混凝剂投加量和pH值对铁锰去除的交互作用。模型优化结果显示,在氧化剂投加量4.16 mg/L,混凝剂投加量263.68 mg/L,pH值为7.54的最佳工艺参数下,铁锰去除率分别可达98.22%和97.49%。     

“竞争申请制”:可持续发展政策试点与央地关系重构

可持续发展目标(SDGs)的提出,开启了人类可持续发展领域最宏大的政策实验,也为开展国际视野的比较公共政策研究提供了难得机遇。执行SDGs及国家可持续发展政策需要处理好中央政府与地方政府间关系,而政策试点是协调这一关系的重要政策工具。已有文献对经济政策试点做了较充分的研究,然而对旨在实现经济、社会与环境协调的可持续发展政策试点,现有研究尚缺乏成型理论。在复杂央地关系格局下,对于需持续投入成本且成果难以界定的可持续发展政策试点,其具有怎样的不同于经济政策试点的机制?此外,众多西方学者将美国作为政策试点研究的制度基础并视其为“民主实验室”。然而,政策试点在以中国为代表的不同体制国家中同样存在,并以多样的机制发挥作用。那么,不同国家体制内的可持续发展政策试点又有哪些异同?政策试点影响下中国既有的央地关系发生了怎样的重构?对此,本文基于最典型案例原则,选取中国与美国响应SDGs分别开展的政策试点进行比较研究。笔者识别了不同体制下试点机制的异同,指出中国基于“竞争申请制”开展的可持续发展政策试点强化了中央部委与地方政府间关系,形成了地方官员的可持续发展激励,保障了政策试点的实施。     

农地整治权属调整中农户认知对行为响应的作用机制--基于改进TPB及多群组SEM

农地整治权属调整是实现农业规模化和现代化的重要手段,而农户有效参与是推动权属调整的内在动力,研究农地整治权属调整中农户认知对其行为响应的作用机制,有助于高效引导农户参与权属调整,并为制定农地整治权属调整的政策提供科学依据。基于改进计划行为理论和湖北省11个县(市、区)1044份农户抽样调查数据,采用多群组结构方程模型探究了农地整治权属调整中不同类型农户认知对其行为响应的作用机制。结果表明:农地整治权属调整中农户行为逻辑符合改进计划行为理论,农户的行为态度、主观规范、知觉行为控制交互影响行为意愿,进而转换为行为响应,政府支持在行为意愿和行为响应之间起到部分中介作用。总体上,农户行为响应是"自发性""诱发性"和"约束性"三重行动逻辑的结合,且"自发性"占主导地位。多群组结构方程估计结果表明,纯农型与兼业Ⅰ型农户的行为响应受到"自发性""诱发性"和"约束性"三重影响,兼业Ⅱ型农户受到"自发性"和"诱发性"双重影响,非农型农户仅受到"诱发性"单一影响。因此,为引导农户积极参与农地整治权属调整,应该分别针对各类农户相应地提高其参与的"自发性"和"诱发性",降低"约束性",充分发挥农村社会经济组织的作用,将四种不同类型农户的利益需求统筹考虑,降低权属调整过程中利益协调难度。     

Effect of pyrolysis and oxidation characteristics on lauric acid and stearic acid dust explosion hazards

The effect of pyrolysis and oxidation characteristics on the explosion sensitivity and severity parameters, including the minimum ignition energy MIE, minimum ignition temperature MIT, minimum explosion concentration MEC, maximum explosion pressure P_max, maximum rate of pressure rise (dP/dt)_max and deflagration index K_st, of lauric acid and stearic acid dust clouds was experimentally investigated. A synchronous thermal analyser was used to test the particle thermal characteristics. The functional test apparatuses including the 1.2 L Hartmann-tube apparatus, modified Godbert-Greenwald furnace, and 20 L explosion apparatus were used to test the explosion parameters. The results indicated that the rapid and slow weight loss processes of lauric acid dust followed a one-dimensional diffusion model (D1 model) and a 1.5 order chemical reaction model (F1.5 model), respectively. In addition, the rapid and slow weight loss processes of stearic acid followed a 1.5 order chemical reaction model (F1.5 model) and a three-dimensional diffusion model (D3 model), respectively, and the corresponding average apparent activation energy E and pre-exponential factor A were larger than those of lauric acid. The stearic acid dust explosion had higher values of MIE and MIT, which were mainly dependent on the higher pyrolysis and oxidation temperatures and the larger apparent activation energy E determining the slower rate of chemical bond breakage during pyrolysis and oxidation. In contrast, the lauric acid dust explosion had a higher MEC related to a smaller pre-exponential factor A with a lower amount of released reaction heat and a lower heat release rate during pyrolysis and oxidation. Additionally, due to the competition regime of the higher oxidation reaction heat release and greater consumption of oxygen during explosion, the explosion pressure P_m of the stearic acid dust was larger in low concentration ranges and decayed to an even smaller pressure than with lauric acid when the concentration exceeded 500 g/m³. The rate of explosion pressure rise (dP/dt)_m of the stearic acid dust was always larger in the experimental concentration range. The stearic acid dust explosion possessed a higher P_max, (dP/dt)_max and K_st mainly because of a larger pre-exponential factor A related to more active sites participating in the pyrolysis and oxidation reaction. Consequently, the active chemical reaction occurred more violently, and the temperature and overpressure rose faster, indicating a higher explosion hazard class for stearic acid dust.     

浅谈爆破振动的控制措施

结合爆破振动的作用机理,分别对减少振源爆炸能量、干扰降振、阻断振动波传播途径、控制爆破规模、合理选择分段间隔时间等爆破振动主要控制措施进行了分析讨论。并根据实际施工情况分析了通过电子雷管实现干扰降振的减振效果,为类似工程提供借鉴作用。     

“T”型地铁换乘站多点火灾工况下综合火灾危险性研究

为探究大型地铁站多线路火灾场景中的综合危险性,采用火灾动力学软件FDS构建“T”型换乘站全尺寸模型,对不同火源位置、不同火源功率以及是否开启地铁排烟风机等12组工况进行数值模拟;采用性能化方法确定可用疏散时间,并通过综合火灾风险评估方法计算各工况总安全指数。结果表明:1号线站厅层和2号线站台层双点火灾为最不利火灾场景;1号线站台层和2号线站厅层双点火灾为相对安全火灾场景;火源功率的增大会增加地铁火灾危险性,但不同火源位置工况中的安全指数变化趋势相似;排烟模式开启前,1号线站厅层火灾会导致较大的火灾危险性;排烟模式开启后,地铁总安全指数显著上升且安全指数变化趋势改变,此时2号线站台层火灾会导致较大的火灾危险性。     

基于社会技术系统的复工企业疫情防控风险路径研究*

为对复工企业疫情防控中的风险致因因素进行分析,探寻复工企业疫情防控的风险路径,基于社会技术系统理论,建立宏观工效学模型,通过查阅并分析国家、地方政府、企业文件以及相关文献,从人员、技术、组织管理、内部环境及外部环境5个子系统出发,识别出16个复工企业疫情失控致因因素;运用社会网络分析（SNA）构建复工企业疫情防控关系网络,对各因素节点中心度进行计算,分析各节点在网络中的位置及影响程度;采用贝叶斯网络（BN）进行参数学习和推理学习,找出复工企业疫情失控的最大致因链。结果表明:复工企业疫情失控关系网络中,存在政府监督管理不力→防疫物资筹备不足→日常监管不到位,政府监督管理不力→ 防疫宣传、培训缺失→员工防疫知识欠缺,政府监督管理不力→防疫宣传、培训缺失→日常监管不到位3条最长风险路径。研究结果可帮助复工企业针对最长风险路径中的因素进行管理,从而有效地为复工企业防疫提供理论支持。     

基于等级全息建模的输油泵机组风险根源辨识*

为“挖掘”输油泵机组风险根源,降低设备预知性维护难度,结合输油泵多准则风险评价,提出1种基于等级全息建模的输油泵机组风险根源辨识方法,运用等级全息建模方法将输油泵系统分解为泵体结构、管理因素、环境因素、操作因素、技术因素、运行因素、设备安装7个子系统进行定性和定量分析。结果表明:相比危险与可操作性分析（HAZOP）、事故树分析（FTA）等传统风险辨识方法,等级全息建模（HHM）对轴承等关键部件以及压力等运行参数的监测更为深入,能够有效辨识输油泵机组高风险情景,提升输油泵的风险辨识效率。     

Recent application of Computational Fluid Dynamics (CFD) in process safety and loss prevention: A review

In recent years, significant progress has been made to ensure that process industries are among the safest workplaces in the world. However, with the increasing complexity of existing technologies and new problems brought about by emerging technologies, a strong need still exists to study the fundamentals of process safety and predict possible scenarios. This is attained by conducting the corresponding consequence modeling and risk assessments. As a result of the continuous advancement of Computational Fluid Dynamics (CFD) tools and exponentially increased computation capabilities along with better understandings of the underlying physics, CFD simulations have been applied widely in the areas of process safety and loss prevention to gain new insights, improve existing models, and assess new hazardous scenarios. In this review, 126 papers from 2010 to 2020 have been included in order to systematically categorize and summarize recent applications of CFD for fires, explosions, dispersions of flammable and toxic materials from accidental releases, incident investigations and reconstructions, and other areas of process safety. The advantages of CFD modeling are discussed and the future of CFD applications in this research area is outlined.