黏土地层联络通道冻结壁厚度优化设计及应用研究*

为解决传统冻结壁设计方法不能真实、合理地反映黏土地层中联络通道冻结壁实际受力情况,进而导致冻结壁厚度设计过于保守的问题,结合黏土地层直墙拱形冻结壁实际受力特点,基于对冻结壁支护压力的合理计算,提出1种适用于黏土地层冻结壁厚度设计的优化方法。结果表明:与传统设计方法相比,该方法所确定冻结壁支护压力与实际施工环境中冻结壁受力状态吻合效果更好,并且能够提供合理的安全储备;经数值计算和现场应用验证,计算所得冻结壁设计方案可以满足施工环境中的承载力及变形稳定性要求;且相较传统设计方案,所得方案兼具安全性与经济性,可有效规避因设计过于保守和冻结周期过长引起的冻胀、融沉变形过大等工程灾害的风险;该方法高效、易行,可为传统冻结壁设计方法提供必要补充,亦可为类似工程的施工设计提供有益参考。     

注入式低温等离子体技术用于卷烟厂异味处理的效果研究

将注入式低温等离子体技术应用于烟厂制丝排潮和制丝除尘排放气体异味处理中,研究了注入式低温等离子体发生器参数对臭味浓度、非甲烷总烃和可检出典型有机物去除率的影响规律。结果表明:注入式低温等离子体发生器工作电压越高,注入处理烟道的氧化活性物种浓度越高,注入量越大,臭味浓度、非甲烷总烃和可检出典型有机物去除率也越高。选取合理的工作电压,臭味浓度去除率可达90%以上,非甲烷总烃去除率分别达到了83.8%(制丝排潮)和78.1%(制丝除尘)。     

Solvent design and inherent safety assessment of solvent alternatives for palm oil recovery

The concept of inherent safety is important in developing an inherently safer and user-friendly process. This paper discusses a new integrated approach of computer-aided product design and inherent safety assessment. Computer-aided Molecular Design (CAMD) approach was utilized in this work to identify potential alternative to n-hexane, the widely used industrial solvent in extracting residual palm oil from pressed palm fibre. The formulation of solvent mixtures was optimized to meet the targeted physical properties before being tested using the Soxhlet Extraction method. Inherent safety assessment to assess the solvent's flammability, toxicity, reactivity, and explosiveness was conducted on the new solvent mix, Mixture 1 (n-hexane + ethanol), Mixture 2 (n-hexane + acetone) and Mixture 3 (n-hexane + n-butanol). It was found that Mixture 1 and 3 are safer than n-hexane and able to extract more oil than n-hexane and Mixture 2. However, the utilization of the solvent is dependent on the end product from the residual palm oil.     

Systematic review on the implementation methodologies of inherent safety in chemical process

The accomplishments of inherent safety in the field of loss prevention thus far are impressive due to its scientific philosophy: reducing risks at source rather than adding engineered and procedural protections. Generally, the implementation of inherent safety can be done through a cohesive set of fourteen principles elucidated by Kletz and Amyotte. This work, guided by the fourteen principles, presents a systematic review on the implementation methodologies of inherent safety. Firstly, PRISMA procedure was adopted to select eligible literatures according to inclusive and exclusive criteria. After obtaining the selected literatures, the preference, level of application, and gaps in using these principles were critically analyzed. Of the fourteen principles, intensification, substitution, attenuation, simplification, limitation of effects, and avoidance of knock-on effects are preferable to implementing inherent safety in chemical process. Although the remaining principles are also potentially useful, they are not commonly used due to their costs and complexities of implementation. Overall, this work presents a complete spectrum to look across the implementation methodologies of inherent safety and concludes with some holistic and inclusive approaches as future research recommendations.     

鄱阳湖平原区农村门塘浮游藻类群落特征及其生物学评价

于2018年—2019年在鄱阳湖区周边选取4个县（区）10个村庄的典型门塘开展浮游藻类采样调查。研究共鉴定出藻类6门83种,以蓝藻门、绿藻门和硅藻门为主;浮游藻类细胞密度全年范围为7.30×104个/L～2.78×1011个/L,年均值为1.4×1010个/L,其中夏季细胞密度最大,冬季细胞密度最小;优势种主要有小环藻、微囊藻、铜绿微囊藻、卵形隐藻等,且具有较为明显的季节演替,全年优势种为小环藻;藻类多样性指数（H′）年均值为1.49,丰富度指数（M）年均值为1.92,全年水体生物学评价结果为中度污染。     

中国低碳城市试点的政策设计逻辑

政策试点是中国国家治理策略体系的重要组成部分,是中国政府遵循“由点到面”逻辑以试验手段制定政策的一种常规性工作方法。低碳城市试点是中国应对气候变化战略的重要组成部分,通过选择不同类型、不同发展阶段、不同资源禀赋的地区开展试点,探索经济增长与碳排放脱钩的模式。现有文献侧重低碳城市建设的内涵、建设模式与路径、温室气体的核算方法、政策手段、峰值研究与达峰路径、效果评估等,有力地支持了低碳城市建设决策,但对于低碳城市试点的政策设计鲜有涉及。本文从政策过程理论、央地关系两个视角,结合府际学习与竞争关系,建构了中国低碳城市政策“试点–扩散”机制与政府行为的分析框架。中国的低碳城市试点具有探索型开拓性、综合型专业性、授权型自主性的特点,结合三批低碳城市试点的文件要求和实践进展,从政策试点的选点、设计、执行、监督和评估五个方面对于中国低碳城市试点进行了系统的梳理分析。相较于经济领域的其他政策试点,低碳城市政策试点具有弱激励弱约束的政策环境。地方政府基于自身的学习能力和领导力,在政策创新方面表现出争先、自主、效仿和守成四种行为特征,并以杭州、深圳、镇江、成都四个表率城市做了实证。政策“试点-扩散”的过程从本质上讲是中国政策创新与扩散的过程,可能在现实中需要往复多次进行,中国已陆续开展的三批低碳城市试点工作就遵循这样的政策逻辑。试点的意义是试出问题、解决问题、积累经验。从前三批试点城市评估结果来看,试点城市在低碳发展目标设定、转型路径探索和低碳发展动力转换等方面与社会的预期仍有差距,为此本文提出了推进低碳城市建设的四点建议:一是激发城市低碳发展的内生动力;二是完善低碳城市试点的科学论证机制;三是建立激励与约束并举的长效机制;四是强化市场公平竞争的政策导向。     

A Simulation Study to Assess the Sensitivity of a Forest Health Monitoring Network to Outbreaks of Defoliating Insects

The sensitivity of the United States Forest Health Monitoring network to outbreaks of defoliating insects was examined by means of a simulation study. A model constructed specifically for the study was used to generate a wide variety of defoliation patterns in forested landscapes. Forest configuration was that of Minnesota, USA, as expressed by the GAP land cover classification. Combinations of model parameters were based on a Latin Hypercube sample. The relationship between the average number of plots defoliated and outbreak characteristics was then examined via multiple regression. Both theoretical and model results pointed to a strong, linear relationship between the average number of plots defoliated and outbreak size. Model results provided additional insight, suggesting a significant relationship between the average number of plots defoliated and other outbreak characteristics after outbreak size was taken into account.     

Geographic Variability in Radon Exhalation at a Rehabilitated Uranium Mine in the Northern Territory, Australia

In this study, dry season radon flux densities and radon fluxes have been determined at the rehabilitated Nabarlek uranium mine in northern Australia using conventional charcoal canisters. Environmental background levels amounted to 31± 15 milli Becquerel per m² per second (mBq m⁻² s⁻¹). Radon flux densities within the fenced rehabilitated mine area showed large variations with a maximum of 6500 mBq m⁻² s⁻¹ at an area south of the former pit characterised by a disequilibrium between ²²⁶Ra and ²³⁸U. Radon flux densities were also high above the areas of the former pit (mean 971 mBq m⁻² s⁻¹) and waste rock dump (mean 335 mBq m⁻² s⁻¹). The lower limit for the total pre-mining radon flux from the fenced area (140 ha) was estimated to 214 kBq s⁻¹, post-mining radon flux amounted to 174 kBq s⁻¹.Our study highlights that the results of radon flux studies are vitally dependant on the selection of individual survey points. We suggest the use of a randomised system for both the selection of survey points and the placement of charcoal canisters at each survey point, to avoid over estimation of radon flux densities. It is also important to emphasize the significance of having reliable pre-mining radiological data available to assess the success of rehabilitation of a uranium mine site.2006 Springer. The Australian Government's right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

Determination of Frequency for Remeasuring Ground and Vegetation Cover Factor Needed for Soil Erosion Modeling

Determining a remeasurement frequency of variables over time is required in monitoring environmental systems. This article demonstrates methods based on regression modeling and spatio-temporal variability to determine the time interval to remeasure the ground and vegetation cover factor on permanent plots for monitoring a soil erosion system. The spatio-temporal variability methods include use of historical data to predict semivariograms, modeling average temporal variability, and temporal interpolation by two-step kriging. The results show that for the cover factor, the relative errors of the prediction increase with an increased length of time interval between remeasurements when using the regression and semivariogram models. Given precision or accuracy requirements, appropriate time intervals can be determined. However, the remeasurement frequency also varies depending on the prediction interval time. As an alternative method, the range parameter of a semivariogram model can be used to quantify average temporal variability that approximates the maximum time interval between remeasurements. This method is simpler than regression and semivariogram modeling, but it requires a long-term dataset based on permanent plots. In addition, the temporal interpolation by two-step kriging is also used to determine the time interval. This method is applicable when remeasurements in time are not sufficient. If spatial and temporal remeasurements are sufficient, it can be expanded and applied to design spatial and temporal sampling simultaneously.     

等离子体脱硫运行参数分析

利用介质阻挡强电离放电产生非平衡等离子体,进行模拟烟气脱硫。通过一次回归正交设计,对影响非平衡等离子体脱硫效率的因素进行了分析,建立了多元线性回归模型,分析了因子的主次,并得到了实验指标和各因子之间的定量规律。通过对模型的优化,获得了使脱硫率较高的各因素的最优组合。