Comparison of Three Extraction Methods for 17 β-Estradiol in Sand,Bentonite, and Organic-Rich Silt Loam

Extraction is an important procedure for samples that contain soil because other compounds in soil may affect analysis of estrogens. This study was conducted to evaluate three different extraction methods for 17β-estradiol in soil. Sand, bentonite, and organic-rich silt loam were spiked with 1 mg kg^{? 1} of 17β-estradiol as a model compound of estrogens. 17β-estradiol and its metabolites, estrone and estriol, were extracted using (i) a modified Bligh and Dyer extraction, (ii) a pressurized fluid extraction, and (iii) a diethyl ether extraction, and measured by liquid chromatography tandem mass spectrometry. There were significant differences in the extraction efficiency for 17β-estradiol among the extraction methods and the soils: the efficiencies ranged from 10% to 97%. Overall, the diethyl ether extraction method had the largest efficiency of 17β-estradiol with 45% and 57% for bentonite and silt loam, respectively. Transformation of 17β-estradiol to estrone and estriol in the different extraction methods was less than 3.6% during the extraction procedures. This study underlined the importance of sample preparation for estrogen analysis in soil samples.     

LOW-HEAD HYDROPOWER IMPACTS ON STREAM DISSOLVED OXYGEN1

ABSTRACT: A method to evaluate the effect of hydropower development on downstream dissolved oxygen (DO) is presented for a low head dam. Water, previously aerated during release over spillways and under gates, is diverted through the hydropower facility without further aeration. The oxygen transfer that occurs as a result of air entrainment at the various release points of a dam is measured. Oxygen transfer efficiencies are calculated and incorporated into an oxygen transfer model to predict average release DO concentrations. This model is used to systematically determine the effect of hydropower operation on downstream DO. Operational alternatives are investigated and a simple operational guide is developed to mitigate the effects of hydropower operation. Combinations of reduced generation and optimal releases from the dam allow the hydropower facility to operate within DO standards.     

Model simulations of dissolved oxygen characteristics of Minnesota lakes: Past and future

A deterministic, one-dimensional, unsteady numerical model has been developed, tested, and applied to simulate mean daily dissolved oxygen (DO) characteristics in 27 lake classes in the state of Minnesota. Reaeration and photosynthesis are the oxygen sources, while respiration, sedimentary, and biochemical water column oxygen demand are the sinks of oxygen in the model. The lake classes are differentiated by surface area (A _s), maximum depth (H _max), and trophic status expressed as Secchi depth (Z _s). Because lake stratification is most important to lake oxygen dynamics, simulated DO characteristics are plotted in terms of a stratification parameterA _s/H _max ^0.25 and Secchi depthZ _s. Simulations provide DO profiles on a daily time scale. Specific DO characteristics of ecological and environmental interest are epilimnetic DO, hypolimnetic DO, DO gradient from surface to bottom, and DO minima and maxima. Specific results are as follows: Simulated mean daily and weekly DO values in the epilimnion of all lakes for both past and future climate scenarios are near saturation over the summer season. Hypolimnetic DO values depend strongly on lake morphometry, trophic status, and time throughout the summer season. Future climate conditions are specified as the historical records from 1955 to 1979, adjusted (monthly) by the 2 × CO₂ GISS model output to account for doubling of atmospheric CO₂. With this climate change, weekly averaged epilimnetic DO is projected to drop by less than 2 mg/liter, and will remain above 7 mg/liter throughout the open water season. The hypolimnetic DO reductions after climate change are on the order of 2–8 mg/liter. Periods of anoxia are longer by as much as 80 days. Those changes would alter water quality dynamics in lakes and have a profound effect on lake ecosystems including indigenous fishes. The results presented are useful for evaluating environmental management options.     

FACTORS THAT AFFECT ACTIVATED SLUDGE PHOSPHATE RELEASE1

The activated sludge process can remove significant amounts of phosphorus from sewage, but the removal efficiency is usually significantly reduced by the release of phosphate back to solution during subsequent treatment steps. This research presents a study of soluble phosphate release from activated sludge with emphasis on defining the factors that affect such release and the actual release mechanisms. Laboratory units were used for experimental purposes. The experiments were designed to study the relationship between soluble phosphate release and various environmental factors such as redox potential (ORP), dissolved oxygen (DO), pH, solids concentration, solids destruction, and sulfate salt addition. The effect of substrate utilization on phosphate uptake and the relationship between uptake characteristics and subsequent phosphate release were also studied. The results show that some phosphate storage occurs during aerobic substrate utilization. Following substrate utilization, activated sludge phosphate release is directly related to the amount of biological stress the organisms are subjected to, and the mechanism of release is primarily cell lysis. The phosphate released per unit sludge under anoxic conditions is relatively constant. Under normal environmental conditions, neither ORP or pH change have a significant affect on phosphate release.     

DIGITAL SIMULATION OF THE EFFECT OF THERMAL DISCHARGE ON STREAM WATER QUALITY1

A modified transient version of the Streeter-Phelps model along with the energy balance equation is employed to analyze the effects of waste heat discharge from power plants on stream water quality. Analysis is also made to examine the effects of the upstream water quality and stream velocity on the downstream DO concentration level. The resulting coupled nonlinear hyperbolic partial differential equations representing the energy, BOD and DO concentrations are solved by the method of characteristics and simulated on a digital computer. Final numerical results indicate that the allowable quantity of thermal discharge does heavily depend on the upstream quality.     

微波消解法快速测定渗滤液化学需氧量

针对国标回流法测定化学需氧量消耗时间长,分析费用高等不足,研究了微波消解法测定垃圾渗滤液的试验方法.通过微波消解功率、消解时间、催化剂用量等试验,确定了微波消解测定渗滤液CODCr的最佳条件.该方法具有省时间、省试剂、准确度高等优点.     

Modeling of n-butane ignition, combustion, and preflame oxidation in the 20-l vessel

The objective of the study reported herein is to simulate various physical and chemical phenomena accompanying fuel-rich n-butane–oxygen mixture preparation, ignition, preflame oxidation, and combustion in the standard 20-l explosion vessel, by applying mathematical models. Based on the computational fluid dynamics (CFD) simulations of the mixing process and natural convection of the ignition kernel, as well as on the analysis of the detailed reaction mechanism of n-butane oxidation, laminar flame propagation, and self-ignition, possible explanations for the phenomena observed experimentally have been suggested. The results of the study indicate that seemingly inflammable mixtures can become hazardous depending on the mixture preparation procedure and forced ignition timing.     

Time series in M dimensions: The one-dimensional case: Pollution in the Chicago Sanitary and Ship Canal

A nonstationary time-series model is used to examine the changes occurring at sampling stations on the Chicago Sanitary and Ship Canal. Using data from upstream sampling sites, downstream levels of dissolved oxygen, total dissolved solids, nitrates and nitrites, and ammonia are accurately predicted. The method is simple, insensitive to extreme values, and responsive to changes in the system.