三级串联人工快渗系统处理养殖废水

人工快速渗滤系统（constructed rapid infiltration,CRI）是在传统的污水快速渗透系统上发展起来的一种新的生物处理方法。采用猪粪浸泡污水模拟实际猪场处理系统的厌氧出水,研究三级串联人工快渗系统对其污染物的去除效果。试验结果表明,三级串联系统对废水COD、NH3N的去除率稳定在81%和94.5%,出水均满足了《畜禽养殖行业污染物排放标准》（GB18596-2001）的要求,同时三级串联系统还可以有效预防系统的堵塞。     

红萍净化水产养殖水体的研究

利用红萍(Azolla)对富营养化水产养殖水体进行净化研究。结果表明,红萍能显著增加水体中的DO,增氧幅度随流量在16.88%～70.46%之间变化,随着养殖水体流经的层数增多或者处理的时间延长,红萍对水体的增氧量加大,水中DO最终趋向一个常数值K;同时,红萍对水体中的NH₃-N和TP都有明显的去除效果,NH₃-N去除率随流量在9.86%～38.90%间波动,TP的去除率则随流量的变化在5.80%～38.43%之间波动。可见,红萍是净化水质的良好材料,能有效改善水产养殖水环境。利用红萍净化水体将为解决高密度集约化水产养殖的瓶颈提供新途径,实现水产养殖用水的封闭循环利用。     

Assessing the long-term supply risks for mineral raw materials—a combined evaluation of past and future trends

This paper develops a method for identifying and assessing long-term supply risks for mineral raw materials. The method is based on a combined evaluation of past and future supply and demand trends. By analysing raw material boom and bust cycles over the past 50 years, we have quantified indicators and defined benchmarks for identifying critical market situations. By applying the method, risks for supply shortage may be identified at an early stage. In addition, a numerical evaluation model has been developed for better comparison between various mineral raw materials. Compared to other assessment methods this method uses specific benchmarks for each raw material to better assess supply risks. The method is embedded within a systematic and comprehensive analytical approach.     

CASS处理技术的原理和应用

介绍了CASS工艺的原理、特点、核心构筑物和设计、运行中应注意的主要问题以及常见故障的排除方法。     

中国21世纪城市供水新概念--分质供水

结合我国城市一直使用的统一给水方式已与当前水资源紧缺,用水多样化,人们饮用水质质化的状况极不适应的情况,提出对传统的给水方式进行改革的最适宜方式是分质供水。     

纳米光催化氧化测定不同水体化学需氧量的研究

采用简便的沉淀法制备的纳米氧化锌为光催化荆,重铬酸钾为光生电子接受体,研究了纳米氧化锌-重铬酸钾体系测定COD的方法.COD值在1～100mg/L之间有良好的线性关系,线性方程为y=0.0007χ 0.0069,相关系数为r=0.9992,检测限为0.66mg,L.采用本方法和CODM.国标法对不同水体样品进行比较测定发现,对低COD值样品本方法加标回收率在96.3%～100.6%之间,变异系数Cv%=1.1～3.4,准确度和精密度均优于CODMn国标法,弥补了低COD值样品国标法(CODmn)测定不准确的不足,且单个样品测定时间短,具有推广应用价值.     

生化需氧量测定的方法改进

生化需氧量测定中接种液的制备和稀释倍数的确定是2个关键的步骤,本文提出一种可行的制备接种液的方法,根据实践经验,总结出一种稀释倍数计算方法,适合在实际分析中使用。     

用海泡石处理采油废水

用海泡石吸附法处理采油废水,考察了处理时间、海泡石加入量和采油废水pH对采油废水COD去除率的影响,并通过正交实验优化了采油废水处理工艺条件。通过正交实验得到的采油废水处理最佳工艺条件为：处理时间6h,粒径为150μm的海泡石加入量200g／L,采油废水pH9。在该条件下处理采油废水,COD去除率达到91％,处理后出水的COD为34．71mg／L,小于GB8978-1996（（污水综合排放标准》中的一级标准（60mg／L）。     

Identification of key parameters controlling dissolved oxygen migration and attenuation in fractured crystalline rocks

In the crystalline rocks of the Canadian Shield, geochemical conditions are currently reducing at depths of 500-1000 m. However, during future glacial periods, altered hydrologic conditions could potentially result in enhanced recharge of glacial melt water containing a relatively high concentration of dissolved oxygen (O2). It is therefore of interest to investigate the physical and geochemical processes, including naturally-occurring redox reactions, that may control O2 ingress. In this study, the reactive transport code MIN3P is used in combination with 2k factorial analyses to identify the most important parameters controlling oxygen migration and attenuation in fractured crystalline rocks. Scenarios considered are based on simplified conceptual models that include a single vertical fracture, or a fracture zone, contained within a rock matrix that extends from the ground surface to a depth of 500 m. Consistent with field observations, Fe(II)-bearing minerals are present in the fractures (i.e. chlorite) and the rock matrix (biotite and small quantities of pyrite). For the parameter ranges investigated, results indicate that for the single fracture case, the most influential factors controlling dissolved O2 ingress are flow velocity in the fracture, fracture aperture, and the biotite reaction rate in the rock matrix. The most important parameters for the fracture zone simulations are flow velocity in the individual fractures, pO2 in the recharge water, biotite reaction rate, and to a lesser degree the abundance and reactivity of chlorite in the fracture zone, and the fracture zone width. These parameters should therefore receive increased consideration during site characterization, and in the formulation of site-specific models intended to predict O2 behavior in crystalline rocks.     

富氧空位/梯次结构CeO2的制备及光催化CO2还原

采用Ce-BTC(均苯三甲酸)为模板,通过尿素溶液浸渍合成了具有富氧空位/梯次结构的CeO₂催化剂,并用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、拉曼光谱(Raman)和紫外可见漫反射(DRS)等手段对其进行了表征.结果表明,与金属有机框架(MOFs)浸渍尿素高温煅烧可以获得金属氧化物/g-C₃N₄复合材料不同,Ce-BTC/尿素体系煅烧后产品中未检测到g-C₃N₄,这可能与CeO₂的存在抑制了尿素分解产物的热缩聚过程,影响了g-C₃N₄的生成有关,但尿素的引入改变了Ce-BTC煅烧产物CeO₂的氧空位浓度,且获得梯次结构.将具有富氧空位/梯次结构的CeO₂-5用于光催化CO₂还原,催化结果表明:反应4h的CO产率可达2.06μmol/g,CH₄产率可达1.42μmol/g,性能是Ce-BTC未...