用工业废水排放量预测地面水CODMn灰色方法研究

ＧＰＭ（１）灰色生长曲线常被用于等距时序环境系统的分析建模、非等距摆动空间序列方面的应用尚未报道。本文研究提出了将非等距摆动空间序列经过等距化处理的ＧＰＭ（１）线性回归优化建模方法采用该方法所建的非等距ＧＰＭ（１）模型用于工业废水量预测地面水ＣＯＤＭｎ的实例表明，该方法简捷，方便、精度高于回归分析，有较大实用价值。     

高效液相色谱法测定饮用水中的微囊藻毒素RR和LR

利用高效液相色谱法(HPLC)测定了藻毒素(MC-RR、LR)标准样品,并绘制了标准曲线,藻毒素浓度在0~5mg/L范围内,HPLC峰面积与藻毒素进样量呈线性关系,RR和LR相关系数分别为0·9986和0·9992,表明该方法可靠、灵敏度较高。对毒素的富集方法及分析条件进行了优化,并在藻类高发期的7~10月份,通过固相萃取(SPE)法对T市饮用水中的MCs进行浓缩富集后,用高效液相色谱仪和标准曲线测出MC-RR和MC-LR值。结果显示,T市高藻期饮用水中含有MCs,应引起足够的重视。     

镉─邻菲啰啉配合物吸附波的研究与应用

在ｐＨ３．３的盐酸－醋酸钠介质中．镉－邻菲啉配合物在－０．６５Ｖ（ｖＳ．ＳＣＥ）处产生一灵敏的吸附波，其二次导数波高与镉浓度在０．０００６～０．１ｍｇ／Ｌ范围内呈良好的线性关系，检出下限达０．０００３ｍｇ／Ｌ。极谱波性质的研究表明该波具有配合物吸附波的特征。方法已用于环境水样中微量错的测定，结果与其它方法吻合。     

发光细菌法评价工业废水的毒性

用发光细菌测定法估算了两城市污水对河道水体污染的分担率，评价了工厂排放废水的毒性，并据此确定了污染源监督管理中应优先治理的工厂（车间）废水。     

博斯腾湖富营养化状态水平调查

通过水质特征和生物学特征的一个水文年规范化实地调查,采用Scirgesew参数分类标准和相关加权综合营养状态指数,对博斯腾湖水体富营养化状态水平进行了调查和评价。     

灰色系统模型GM（1,1）在大气环境浓度预测中的应用

运用灰色系统理论，结合实例详细介绍了ＧＭ（１，１）模型在大气环境浓度预测中的应用。     

浅谈GAM与GM（1,1）模型

对ＧＡＭ水环境预测模型提出了四点不同看法，与有关作者商榷，指出ＧＭ（１，１）模型与ＧＡＭ模型二者并无优劣之差，精度亦相当。     

合成洗涤剂对小鼠诱变性研究

连续５天腹腔注射同一剂量（１／５ＬＤ５０）的合成洗涤剂，取小鼠骨髓细胞测定嗜多染色红细胞的微核率，研究表明，３种合成洗涤剂（加大香洗衣粉，洁牌餐具洗涤剂，恩威高级餐具洗洁精）使小鼠微核率有所增高，但恩威，洁牌餐具洗涤剂与对照无显著性差异。     

标准BOD5测定法的"空气净化--稀释水曝气"装置研究

"稀释与接种法"是BOD5的标准测定方法,制备溶解氧接近饱和且不含能干扰生化耗氧过程的物质的稀释水,是该法重要的工作之一.由真空泵带动的"空气净化--稀释水曝气"装置,流程合理、装配容易、调控灵活,可连贯进行空气净化与稀释水曝气,而制取符合质量要求的稀释水.     

Application of CFD Methods for Modelling in Air Pollution Problems: Possibilities and Gaps

Different urban air pollution problems deal with complex structure of air flows and turbulence. For such problems the Computer Fluid Dynamics (CFD) methods become widely used. However, this approach despite a number of advantages has some problems. Experience of use of CFD tools for development of models and suggestions of their applications for a local scale air pollution over a complex terrain and stable stratification are discussed in this paper, including: Topography and complex geometry: choose of the co-ordinate system and computer grid; Turbulence closure for air pollution modelling: modified k- model for stable stratified ABL; Boundary conditions for vertical profiles of velocity for stable-stratified atmosphere; Effects of the radiation and thermal budget of inclined surfaces to dispersion of pollutants; Artificial sources of air dynamics and circulation.Some examples of CFD applications for air pollution modelling for a flat terrain, mountainous area, mining open cast and indoor ventilation are discussed. Modified k- model for stably-stratified ABL is suggested. Due to the isotropic character of the k- model a combination of it in vertical with the sub-grid turbulence closure in horizontal can be more suitable for ABL. An effective scheme of boundary conditions for velocity profiles, based on the developed similarity theory for stable-stratified ABL, is suggested. Alongside with the common studies of atmospheric dispersion, the CFD methods have also demonstrated a good potential for studying anthropogenic and artificial-ventilation sources of air dynamic and circulation in local-scale processes of air pollution.