以pH和ORP作为脉冲SBR工艺的实时控制参数

为了实现脉冲SBR深度脱氮的实时控制，以某污水处理厂市政污水为处理对象，考察了脉冲SBR在深度脱氮过程中pH及ORP的变化规律。试验结果表明，pH及ORP的变化规律与脉冲SBR有机物去除、硝化与反硝化过程存在较好的相关关系。可以根据pH和ORP变化曲线上的特征点对脉冲SBR进行实时控制。并考察了污水C／N（COD／NH4^＋-N）对pH及ORP的变化规律的影响。在硝化过程中，C／N对pH及ORP曲线变化点的出现没有影响；在反硝化过程中，应结合pH值“硝酸盐峰”和ORP“硝酸盐膝”来判断低C／N污水反硝化的终点。在该试验中，出水TN低于2mg／L，TN去除率可达到96％以上。     

高效喷淋泡沫脱硫技术及装置的应用

SO2是产生酸雨的主要气体，其主要来源于工业燃煤锅炉。以沈阳一家电厂为例，该厂选用新型高效的喷淋泡沫脱硫除尘器对锅炉排放的SO2进行治理。进入喷淋泡沫塔前的SO2平均浓度为2780mg／m^3，经脱硫后出塔平均浓度为289．3mg／m^3，去除率为89．6％。结果表明，这种有别于传统湿法的新型高效的喷淋泡沫脱硫技术及装置具有脱硫效率高、装置占地少、运行稳定、沉淀物易于回收利用等特点，对锅炉排放的SO2进行治理是非常有效的。     

基于RS-485总线的污水处理集散控制系统

针对我国污水处理厂分散生产运行管理，污水处理厂自动化、信息化管理水平偏低，有待采用计算机技术、自动控制技术、通信等新技术改进提高，实现污水处理厂远程集中监测、监控问题，提出污水处理厂远程监测、监控系统开发参考模型。阐述了污水处理厂远程监控系统的结构体系、开发思路、污水处理厂现场控制对象及设计、监控中心设计、监控中心和各污水处理厂通信设计、开发工具及监控软件设计等技术及要求。     

垃圾焚烧发电过程中的二次污染物控制处理技术

概述了二口恶英、重金属、酸性气体、灰渣等垃圾焚烧二次污染物的形成机理，并详细介绍了通过控制垃圾焚烧条件、尾气处理以及吸附等方法，可以有效控制二口恶英类污染物的排放；重金属的控制可以用除尘器或使用相应的吸附剂处理；采用较为成熟的烟气处理技术，可以控制处理酸性气体；灰渣可采用固化稳定化和酸或其他溶剂提出法处置。     

沭阳县水环境安全管理与污染防治对策探讨

在简要介绍沭阳县水环境概况后,着重分析了该县的水污染现状和主要的水环境问题,并针对性地提出了一些水环境安全管理和污染防治的建议,建立淮河流域水环境安全协调机制和沭阳水环境保护机制,完善水质监测,加强工业、农业和生活污染的防治,建立清污分流系统,并加强宣传教育等项工作.     

OTC－1型开顶式气室的结构和性能

本文详细论述了开放式气室的结构与性能，二氧化碳浓度数据采集系统、物理性能等。并重点介绍了作者自行研制的ＯＴＣ－Ｉ型开顶式气室。     

中国九十年代城市环境污染控制战略(下)

80年代是我国城市社会经济发展最快的时期,城市化水平由1981年的14.3％提高到1990年的21％,城市规模结构趋向合理,形成了以大城市为中心,中等城市为骨干和小城市为纽带的城市结构。但应该清醒的是,我国绝大部分城市的经济发展水平与工业     

EuroBionet: a pan-European biomonitoring network for urban air quality assessment

EuroBionet, the 'European Network for the Assessment of Air Quality by the Use of Bioindicator Plants', is an EU-funded cooperative project currently consisting of public authorities and scientific institutes from 12 cities in 8 countries. In 2000, the bioindicator plants tobacco (Nicotiana tabacum Bel W3), poplar (Populus nigra 'Brandaris'), spiderwort (Tradescantia sp. clone 4430), Italian rye grass (Lolium multiflorum italicum) and curly kale (Brassica oleracea acephala) were exposed to ambient air at 90 monitoring sites according to standardised methods. Visible injuries and growth parameters were assessed and the accumulation of toxic substances in leaves determined. The exposure of tobacco resulted in a gradient with low levels of ozone-induced foliar injury in N and NW Europe, and medium to high values in the southern and central regions. The results of heavy metal and sulphur analyses in rye grass samples generally showed low to very low sulphur and low to medium heavy metal concentrations in leaves. In some cities, however, local hot spots of heavy metal contamination were detected. Analyses of the PAH contents in curly kale leaves gave low to medium values, with locally elevated levels at traffic-exposed sites.     

Ozone patterns for three metropolitan statistical areas in North Carolina, USA

As part of an effort by the state of North Carolina to develop a State Implementation Plan (SIP) for 1-h peak ozone control, a network of ozone stations was established to monitor surface ozone concentrations across the state. Between 19 and 23 ozone stations made continuous surface measurements between 1993 and 1995 surrounding three major metropolitan statistical areas (MSAs): Raleigh/Durham (RDU), Charlotte/Mecklenburg (CLT), and Greensboro/High Point/Winston-Salem (GSO). Statistical averages of the meteorological and ozone data were performed at each Metropolitan Statistical Area (MSA) to study trends and/or relationships on high ozone days (days in which one of the MSA sites measured an hourly ozone concentration90.0 ppbv). County emission maps of precursor gases, wind roses, total area averages of ozone, total downwind averages of ozone deviations, upwind averages of ozone, and a modified delta ozone analysis were all obtained and analyzed. The results of this study show a reduction in the delta ozone relative to an earlier study at RDU, but no average significant change at CLT (no comparison can be made for GSO). The statistical data analyses in this study are used to quantify the importance of local contributions and regional transport, to ozone air pollution in the MSAs.     

The SeKT joint research project: definition of reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests

- In current biotest approaches, intact organisms or in vitro systems are exposed to sediments using different exposure scenarios. The most important issue in sediment toxicity testing protocols is the question which test phase (solid or liquid) should be used. Whole-sediment exposure protocols represent the most realistic scenario to simulate in situ exposure conditions in the laboratory. However, until now there is no agreement in how to acquire and to evaluate the data of the various available sediment contact assays. The SeKT joint research project was initiated with the aim to compare recently developed sediment contact assays by addressing reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests.