臭氧-曝气生物滤池处理酸性玫瑰红染料废水

在实验室配制含酸性玫瑰红染料的印染废水，采用臭氧氧化-曝气生物滤池工艺开展处理试验。试验运行结果表明，臭氧氧化处理能提高模拟废水的可生化性，BOD／COD值由原水的0．18上升到0．36。经组合工艺处理后出水COD〈40mg／L，色度40倍以下，SS约50mg／L，处理效果良好。     

2005~2016年中国大气边界层SO2的时空变化趋势

利用臭氧观测仪（OMI）卫星遥感反演的大气边界层（PBL）SO₂柱含量（PBL SO₂）数据分析了自2005年以来中国PBL SO₂柱含量数据的空间分布特征、变化趋势及其影响的原因.从长时间尺度上,PBL SO₂柱含量呈现明显的下降趋势.2005年中国区域年平均PBL SO₂柱含量为0.317DU,2016年为0.276DU,减少了0.041DU,大约为13.2%.SO₂柱含量呈现明显的周期变化特征.冬季浓度较高,夏季较低,最小值和最大值分别出现在7和12月,分别为0.246和0.404DU.小波分析显示SO₂的变化在10个月的尺度水平上存在明显的主振荡周期,在40个月的尺度水平上存在明显的次周期变化.中国区域SO₂污染严重的高值区主要出现在京津冀鲁环渤海地区、关中平原（山西省和陕西省）、河南省大部分地区、四川盆地、长江三角洲地区和珠江三角洲.最大的SO₂柱含量值可达1.1DU以上.京津冀鲁环渤海地区的高值区已经延伸到长江三角洲地区,有向南延伸和珠江三角洲连在一起的趋势.由于地形和天气特征的影响,四川盆地地区SO₂出现次高值区.在青藏高原和西北地区,SO₂浓度较低,呈现背景值特征,多年平均的SO₂约在0.05DU的水平.中国区域SO₂变化趋势在空间分布上存在明显的区域差异,变化的范围在-0.70~0.15DU之间.SO₂出现逐渐减少的地区主要是在高值区,如京津冀鲁环勃海地区、关中平原、四川盆地,长江中下游和珠江三角洲.减幅最大的是四川盆地和珠江三角洲,大约减少了61%.四川盆地2005~2016年约减少了0.55DU;珠江三角洲约减少了0.45DU.出现增长的地区主要是西部和北部地区,以及东南沿海除珠三角外的大部分区域,最大增长大约为0.15DU.     

南京大气臭氧浓度的季节变化及其对主要作物影响的评估

近年来,近地面O_3浓度呈不断上升趋势,高浓度O_3会影响作物的生长导致产量降低.本文利用2014~2016年南京市近地面O_3浓度的连续观测数据,分析了O_3浓度的变化特征及其对冬小麦和水稻产量与经济损失的影响.结果表明,2014~2016年南京市O_3年平均浓度分别为62.9、68.6和69.1μg·m-3,O_3浓度和超标日数均呈现逐年增加的趋势.季节平均的O_3浓度大小的顺序为:夏季、春季、秋季和冬季.四季O_3浓度的日变化均为明显的"单峰型",峰值出现在15:00~16:00,谷值出现在07:00~08:00.2014~2016年冬小麦生长季期间AOT40的数值分别为10.5、14.4和9.4μL·L~(-1)·h,水稻生长季期间AOT40的数值分别为8.5、20.0和25.6μL·L~(-1)·h.近地面O_3对冬小麦的影响要高于水稻,其中,2014~2016年O_3造成冬小麦减产范围为21.4%~32.8%,每年的经济损失达15 076.6~27 799.6万元,造成水稻减产范围为8.1%~24.3%,每年的经济损失达19 747.2~68 075.7万元.     

合肥市典型交通干道大气苯系物的特征分析

为研究合肥市交通干道大气苯系物污染状况,采用自主研制的差分吸收光谱(DOAS)系统,于2016年3月期间对合肥市交通主干道大气苯系物(苯、甲苯、间二甲苯和邻二甲苯)以及常规污染物NO_2、SO_2等进行了连续观测.观测结果显示,观测期间苯、甲苯、间二甲苯和邻二甲苯的平均浓度分别为:21.7、63.6、33.9和98.7μg·m~(-3).与国内外其它城市比较显示,合肥市交通干道大气苯和甲苯的污染处于中等水平,二甲苯的污染较为严重.结合观测期的间风速风向、T/B特征比值以及与CO等污染物的相关性,对上述苯系物来源进行了分析,结果显示观测期间T/B值为0.8~4.5,苯、甲苯与CO的相关性系数R分别为0.55和0.34.表明机动车尾气排放是观测区域苯和甲苯的主要排放源之一,同时也受到周边工业园区排放的影响,二甲苯的主要排放源为观测地点北偏东方向的涂料行业工业园区.苯和甲苯的夜间高浓度峰值分析结果表明,夜间的高浓度苯和甲苯可能主要来源于观测地点周边工业园区的排放.观测区域苯系物的臭氧生成潜势(OFP)表现为邻二甲苯间二甲苯甲苯苯,其中二甲苯的OFP占总OFP的85%,表明周边工业园区的排放对该地区臭氧生成的贡献较大.     

Phytotoxicity and groundwater impacts of leaching from thermal treatment residues in roadways

The use of coal fly ash (CFA), municipal solid waste incinerator bottom ash (MSWIBA) and flue gas desulfurization residue (FGDR) in road construction has become very common owing to its economical advantages. However, these residues may contain toxic constituents that pose an environmental risk if they leach out and flow through the soil, surface water and groundwater. Therefore, it is necessary to assess the ecotoxicity and groundwater impact of these residues before decisions can be made regarding their utilization for road construction. In this study, the physico-chemical characteristics, leaching and phytotoxicity of these residues were investigated. Specifically, multivariate analyses were used to evaluate the contributions of the leaching constituents of the CFA, MSWIBA and FGDR leachates to the germination index of wheat seeds. B, Ba, Cr, Cu, Fe and Pb were found to be more toxic to the wheat seeds than the other heavy metals. Furthermore, the leached concentrations of the constituents from the CFA, MSWIBA and FGDR were below the regulatory threshold limits of the Chinese identification standard for hazardous wastes. Analyses conducted using a numerical groundwater model (WiscLEACH) indicated that the predicted field concentrations of metals from the CFA, MSWIBA and FGDR increased with time up to about 30 years at the point of compliance, then decreased with time and distance. Overall, this study demonstrated that the risks resulting from MSWIBA, CFA and FGDR leaching could be assessed before its utilization for road construction, providing crucial information for the adoption of these alternative materials.     

Application of nanoparticle tracking analysis for characterising the fate of engineered nanoparticles in sediment-water systems

Novel applications of nanotechnology may lead to the release of engineered nanoparticles (ENPs), which result in concerns over their potential environmental hazardous impact. It is essential for the research workers to be able to quantitatively characterise ENPs in the environment and subsequently to assist the risk assessment of the ENPs. This study hence explored the application of nanoparticle tracking system (NTA) to quantitatively describe the behaviour of the ENPs in natural sediment-water systems. The NTA allows the measurement of both particle number concentration (PNC) and particle size distribution (PSD) of the ENPs. The developed NTA method was applied to a range of gold and magnetite ENPs with a selection of surface properties. The results showed that the positively-charged ENPs interacted more strongly with the sediment than neutral and negatively-charged ENPs. It was also found that the citrate coated Au ENPs had a higher distribution percentage (53%) than 11-mercaptoundecanoic acid coated Au ENPs (20%) and citrate coated magnetite ENPs (21%). The principles of the electrostatic interactions between hard (and soft) acids and bases (HSAB) are used to explain such behaviours; the hard base coating (i.e. citrate ions) will interact more strongly with hard acid (i.e. magnetite) than soft acid (i.e. gold). The results indicate that NTA is a complementary method to existing approaches to characterise the fate and behaviour of ENPs in natural sediment.     

MIL-101高效吸附测定土壤气中三氯乙烯及健康风险评估

为研究基于实测土壤气中ρ（三氯乙烯）计算风险值与Johnson-Ettinger联合Dual-Equilibrium Desorption（JE-DED）模型和J&E模型计算风险值的差异,在MIL-101、UIO-66、ZIF-8和MOF-801金属-有机骨架（MOFs）材料,球形活性炭、膨胀石墨碳吸附材料及HiSiv1000和HiSiv3000分子筛等3类8种吸附剂中筛选出吸附效率较高的MIL-101 MOF材料用以吸附并测定土壤气中ρ（三氯乙烯）,并将基于实测土壤气中ρ（三氯乙烯）计算的风险值与J&E模型和JE-DED模型计算的风险值进行比较.结果表明:①对于北京潮土和黑龙江黑土,J&E模型计算的风险值比基于实测土壤气中ρ（三氯乙烯）计算的风险值高2个数量级.②对于w（有机碳）较低的北京潮土,基于JE-DED模型计算的风险值比基于实测土壤气中ρ（三氯乙烯）计算的风险值高1个数量级,但比基于J&E模型计算的风险值低1个数量级,表明JE-DED模型预测结果更接近实际情况,但仍偏保守.③w（有机碳）较高的黑龙江黑土,JE-DED模型计算的风险值与基于实测土壤气中ρ（三氯乙烯）计算的风险值更接近,JE-DED模型可以比较准确地预测三氯乙烯的风险值.研究显示,采用土壤气中ρ（三氯乙烯）实测值和JE-DED模型进行风险评价在一定程度上可以避免J&E计算过于保守的问题,可以更加真实客观地反映场地污染程度而避免过度修复产生资源浪费.