纳米TiO2催化臭氧化对松花江水中氨氮的影响

研究了以负载于陶粒、硅胶、沸石表面的纳米TiO₂作为催化剂时,催化臭氧化松花江水过程中氨氮浓度的变化.结果表明,在单独臭氧化过程中,氨氮浓度先升高后下降,反应30 min后的氨氮浓度与初始浓度相近.在以TiO₂/陶粒、TiO₂/硅胶为催化剂的催化臭氧化过程中,氨氮浓度也是先升高后下降,但反应过程中氨氮的平均浓度要高于单独臭氧化过程.以TiO₂/沸石为催化剂时,催化臭氧化过程中氨氮浓度先下降,然后略有升高,继而又下降,30 min时对氨氮的去除率接近80%.单独臭氧化和催化臭氧化过程中,增大臭氧投量,氨氮浓度最大值出现的时间提前,并且反应过程中氨氮浓度平均值降低.增大催化剂TiO₂/陶粒、TiO₂/硅胶的投量,催化臭氧化过程中氨氮浓度平均值升高.增大TiO₂/沸石投量,有利于氨氮的去除,但投量增大到50g以上时,对氨氮的去除效果影响很小.温度从10℃升高到30℃,对TiO₂/陶粒、TiO₂/硅胶催化臭氧化过程中氨氮浓度的变化影响不大.而以TiO₂/沸石为催化剂时,温度升高有利于催化臭氧化过程中氨氮的去除.     

气体脱硫胺液系统的清洁生产

分析了气体脱硫装置胺液系统污染物的主要来源和危害,通过采取清洁生产工艺、材质升级、在线净化复活、停工清扫塔器和新脱硫剂补充置换等措施,取得了较好的效果.     

臭氧/混凝预处理工艺降低膜污染的研究

采用臭氧和混凝工艺分别处理黄浦江原水后进行MF膜过滤试验,考察2种预处理工艺对有机物的作用,进而考察其对MF膜过滤特性的影响.结果表明,2种预处理工艺都存在一个使膜污染下降率达到最大的最佳投药量.2种预处理工艺中,混凝降低膜污染的效果要好于臭氧,这主要与2种预处理工艺所去除的有机物性质有关.黄浦江水中有机物相对分子质量主要集中在3×103～5×103范围内,膜化学清洗液的分析表明造成膜污染的有机物相对分子质量主要集中在4.5×103附近,臭氧对相对分子质量在3×103附近的有机物去除效果较好,而混凝主要去除5×103附近的较大相对分子质量的有机物,因而混凝对这部分污染膜物质的去除效果要好于臭氧,从而有效降低了膜污染.     

企业风险管理与经营效率：来自中国保险业的经验证据

本文从风险管理的视角对企业效率评估的数据包络分析技术进行了改进,探讨了风险管理与经营效率的内在关联,并以中国保险业为例,对1999年以来企业真实的经营效率水平进行了评估。结果表明：企业内部的风险管理能力对其经营效率水平的提升具有明显的影响,而且这种影响力正在逐渐加强。不考虑企业内部的风险管理水平将直接导致其经营效率的测算结果出现低估,2002年以后这种低估的程度越发明显,这可归因于同期保险企业开始逐渐重视提高自身的风险管理能力。以上结论也为企业如何在管控风险的同时提升经营效率水平提供了有价值的指导。     

Sustainability issues in sheet metal forming processes: an overview

Environmental sustainability in manufacturing is nowadays an urgent and remarkable issue and the main concerns are related to more efficient use of materials and energy.In sheet metal forming processes there is still a lack of knowledge in this field mainly due to the need of a proper modelling of sustainability issues and factors to be taken into account. The aim of this paper is mainly to underline the state of the art from a forming point of view about the sustainability contributions offered in any phase of a product life cycle. Actually, a lack in terms of comprehensive contributions is present in the technical literature, thus, the authors try to give a sort of holistic vision aimed to provide basic guidelines in order to help in identifying the possible solutions with regard to all the phases of a forming product life cycle. The main attention was paid to sheet metal forming technologies. The paper gives an overview of the main topics concerning sheet metal forming problems related to energy and resource efficiency with the aim to stress the principal contributions which may derive from such processes to environmental performances of manufacturing.     

Assessment of eco-labelling criteria development from a strategic sustainability perspective

To turn current patterns of consumption and production in a sustainable direction, solid and understandable market information on the socio-ecological performance of products is needed. Eco-labelling programmes have an important role in this communication. The aim of this study is to investigate what gaps there may be in the current criteria development processes in relation to a strategic sustainability perspective and develop recommendations on how such presumptive gaps could be bridged. First a previously published generic framework for strategic sustainable development is described and applied for the assessment of two eco-labelling programmes. Data for the assessment is collected from literature and in semi-structured interviews and discussions with eco-labelling experts.The assessment revealed that the programmes lack both an operational definition of sustainability, and a statement of objectives to direct and drive the criteria development processes. Consequently they also lack guidelines for how product category criteria might gradually develop in any direction. The selected criteria mainly reflect the current reality based on a selection of negative impacts in ecosystems, but how this selection, or prioritization, is made is not clearly presented. Finally, there are no guidelines to ensure that the criteria developers represent a broad enough competence to embrace all essential sustainability aspects.In conclusion the results point at deficiencies in theory, process and practice of eco-labelling, which hampers cohesiveness, transparency and comprehension. And it hampers predictability, as producers get no support in foreseeing how coming revisions of criteria will develop. This represents a lost opportunity for strategic sustainable development. It is suggested that these problems could be avoided by informing the criteria development process by a framework for strategic sustainable development, based on backcasting from basic sustainability principles.     

南方红壤丘陵区粮食生产的完全成本 ——以湖南省祁阳县为例

针对目前我国农业生产中的资源环境问题,指出粮食生产成本核算的不完整性,粮食生产造成的资源耗减和环境降级得不到补偿。运用环境经济学原理和可持续发展理论对粮食生产的完全成本进行分析,提出粮食生产的完全成本除包括直接生产成本外,还应包括粮食生产的资源环境成本。论文以南方红壤丘陵区的湖南省祁阳县为研究对象进行案例分析,研究表明,2008年该区域粮食生产的资源环境成本相当于当年农业总产值的36.55%;早、中、晚稻的完全成本分别达到4.27、3.84和4.40元·kg^-1,其中资源环境成本分别为1.38、 1.65和1.64元·kg^-1,直接生产成本分别为2.89、 2.19和2.76元·kg^-1,而实际市场价格分别仅有1.76、 1.90和1.84元·kg^-1。研究结果对有关部门制定相关农业政策、调整粮食生产布局、促进区域粮食生产和可持续发展具有一定的参考价值。     

1株脱氮除磷菌的筛选及其特性研究

采用YG培养基,结合蓝白斑筛选、异染粒染色及好氧除磷能力检测等实验,从城市生活污水处理厂好氧生化池的活性污泥中分离出7株好氧除磷菌;再经硝酸盐还原产气和缺氧培养实验,筛选出1株高效脱氮除磷菌;通过16S rRNA基因同源性比较和生理生化鉴定,初步将其鉴定为Pseudomonas grimontii,命名为C18.菌株C18在好氧培养24h后,培养基中上清液磷浓度从38.7mg/L降低到2.28mg/L,除磷率达94.1%.C18在缺氧培养24h后,培养基中上清液磷浓度从44.5mg/L降低到5.21mg/L,除磷率达88.3%;上清液硝酸盐氮浓度从184.2mg/L降低到30.6mg/L,脱氮率达83.4%.菌株C18最适脱氮除磷温度为30℃;最适脱氮除磷pH为7.5.     

春季太湖光量子产额空间分布的特征分析

基于2009年4月28日、5月4日、5月5日及5月6日在太湖梅梁湾的栈桥头、直湖港的河口区、太湖中心及胥口湾中心测定的初级生产力及水下光场数据,计算了各测点的藻类光量子产额和P-I曲线,并分析了其空间差异的特征.太湖栈桥头的P-I曲线呈现出明显的光抑制现象;在胥口湾中心和直湖港河口,P-I曲线呈现出弱的光抑制现象;而在太湖中心区域,P-I曲线只达到了光饱和状态,并未出现光抑制现象.单位叶绿素a的最大光量子产额的大小顺序为太湖中心区域、梅梁湾的栈桥头、直湖港的河口区及胥口湾的湖心区.