有机废水资源化技术--发酵产氢

氢作为一种清洁高效的可再生能源日益受到人们的重视.利用有机废水发酵产氢,既保护环境又可获得氢能,是一条符合可持续发展战略的废水资源化途径,极具发展前景.本文介绍了发酵产氢微生物的种类及其产氢机理,对发酵产氢的影响因素进行了分析;总结了有机废水发酵产氢的研究现状,并探讨了今后的研究方向.     

中温和高温厌氧生物产氢反应器连续运行的研究

采用2个厌氧生物产氢反应器分别在中温(37℃)和高温(55℃)下连续运行.以河底沉积物接种,葡萄糖为基质,在CSTR中成功实现了连续中温厌氧产氢,最高产氢量达8.6L/(L·d),基质产氢摩尔比(H₂/葡萄糖)为1.98.以厌氧产甲烷颗粒污泥接种,蔗糖为基质,在UASB反应器中成功实现了连续高温厌氧产氢过程,最高产氢量达6.8L/(L·d),基质产氢摩尔比(H₂/蔗糖)为3.6.在高温UASB反应器中培养获得了灰白色的产氢颗粒污泥,平均粒径为0.8～1.2mm,沉速为30～40m/h,电镜观察发现其表层生长大量杆状细菌.对2种产氢污泥的总DNA进行提取和纯化,通过PCR扩增和DGGE分析,发现高温和中温厌氧产氢污泥中的大部分真细菌种类相同,但各自的优势菌种明显不同.     

青藏铁路用空气弹簧橡胶胶料耐紫外线老化试验研究

我国正在建设的青藏铁路是世界上海拔最高、线路最长的高原铁路.其气候特点对橡胶制品提出了新的技术要求,为适应在该气候条件下的运用需要,进行了针对空气弹簧胶囊用橡胶的耐紫外线老化试验研究工作,试验表明随着紫外线老化时间的增加,其硬度和300%定伸强度均提高,但拉伸强度和扯断伸长率随着紫外线老化时间的增加而降低;通过与胶料的耐臭氧试验和大气老化试验比较,基本可以认为引起空气弹簧胶囊表面龟裂的主要原因是受力状况、臭氧和大气老化的作用,而紫外线对橡胶的表面龟裂影响作用不大,因此,为提高空气弹簧胶囊的耐老化性能,主要考虑降低橡胶的受力,提高耐臭氧和耐大气老化性能.     

多功能粉煤灰治理垃圾场渗滤液

以具絮凝、吸附、降解多功能粉煤灰污水处理材料,填充成絮凝沉降降解过滤箱,组合有鼓气、臭氧的连续式5级垃圾场渗滤液集成处理系统。垃圾渗滤液流量、鼓气量、臭氧量分别为40Lh、40L(m3·h)、15mgL的工艺条件下,渗滤液的悬浮物、色度、CODCr、BOD5、氨氮、硫化物等主要污染物指标分别降低93%、90%、96%、92%、86%和92%,达到垃圾场渗滤液二级控制标准。     

Managing disposal of water produced with petroleum in Kuwait

Disposal of water produced with petroleum has been of great interest in Kuwait for the last 20 years. The current problem arose when the Burgan oil field, which is the second largest field in the world, experienced successive increases in the water content of the produced oil. This study introduces a decision-making analysis of the considered alternatives for the disposal of the produced water. Four alternative solutions exist for the industry as practical solutions for the disposal of water produced in Kuwait. The first method utilizes a large number of pits to discharge water. The second alternative depends on discharging water into sealed pits. The third approach to dispose water is by injecting the water underground. The last method is similar to the previous one, but takes into consideration the recovery of reservoir pressure to maintain the rate of oil production. A questionnaire was distributed to 48 experts at the top management level of the petroleum companies and the governmental authority. The data collected considered cost, efficiency, and environmental parameters. Based on the data, a statistical analysis was conducted using the factor analysis method to reduce the number of investigated variables. The analysis concluded that the optimal solution is to use the effluent injection method to discharge water produced with oil in Burgan and similar fields in Kuwait.     

Multi-stage sampling for large scale natural resources surveys: a case study of rice and waterfowl

Large-scale sample surveys to estimate abundance and distribution of organisms and their habitats are increasingly important in ecological studies. Multi-stage sampling (MSS) is especially suited to large-scale surveys because of the natural clustering of resources. To illustrate an application, we: (1) designed a stratified MSS to estimate late autumn abundance (kg/ha) of rice seeds in harvested fields as food for waterfowl wintering in the Mississippi Alluvial Valley (MAV); (2) investigated options for improving the MSS design; and (3) compared statistical and cost efficiency of MSS to simulated simple random sampling (SRS). During 2000-2002, we sampled 25-35 landowners per year, 1 or 2 fields per landowner per year, and measured seed mass in 10 soil cores collected within each field. Analysis of variance components and costs for each stage of the survey design indicated that collecting 10 soil cores per field was near the optimum of 11-15, whereas sampling >1 field per landowner provided few benefits because data from fields within landowners were highly correlated. Coefficients of variation (CV) of annual estimates of rice abundance ranged from 0.23 to 0.31 and were limited by variation among landowners and the number of landowners sampled. Design effects representing the statistical efficiency of MSS relative to SRS ranged from 3.2 to 9.0, and simulations indicated SRS would cost, on average, 1.4 times more than MSS because clustering of sample units in MSS decreased travel costs. We recommend MSS as a potential sampling strategy for large-scale natural resource surveys and specifically for future surveys of the availability of rice as food for waterfowl in the MAV and similar areas.     

城市有机垃圾间歇厌氧消化pH控制动力学研究

对厌氧消化系统的物料及电离平衡进行分析,利用底物降解和微生物生长动力学建立城市有机垃圾间歇厌氧消化pH值控制模型,并研制开发了间歇厌氧消化过程pH值与产气量最优化计算机软件.运用该模型可预测不同厌氧消化过程的最佳pH值,从而通过控制厌氧系统的pH值使系统产气量达到最大,通过2组对比实验验证模型的有效性.结果表明,在相同的实验条件下厌氧系统的pH控制在最佳值时系统产气较未对pH值控制时稳定,且总产气量平均提高20%左右.     

长江经济带绿色城镇化效率评价及其影响因素——基于多维城镇化视角

本文引入资源和环境因素,以城镇化综合指数为期望产出,运用SBM方向性距离函数测算了2010—2020年长江经济带112个地级市（州）的绿色城镇化效率,并采用空间面板模型和地理探测器对绿色城镇化效率的影响因素进行实证分析。结果表明：长江经济带绿色城镇化效率整体水平不高,下游地区绿色城镇化效率高于上游和中游地区,资源消耗和环境污染是效率损失的主要来源;绿色城镇化效率表现出较为明显的热点—次热点—次冷点—冷点自东向西的带状分布格局,存在显著的空间正相关性。政府财政支出对绿色城镇化效率产生负向影响,外商直接投资和产业结构对提升绿色城镇化效率有显著的促进作用,且三者的影响具有地区差异性;市场力因素有利于绿色城镇化效率的提高。邻近城市间绿色城镇化效率的空间溢出效应明显,且空间溢出效应是长江经济带绿色城镇化效率空间差异的最主要因素,各因素的影响具有协同增强的作用。     

Indicator framework for sustainable production planning and controlling

Production facilities serve to transform raw materials into products, usually with the goal of achieving a designated output, in terms of quantity and quality, with the minimum of cost and labour. With the aid of production planning and controlling (PPC) systems, raw material inputs, and labour can be planned to achieve a determined output of products. In general, the role of environmental and social aspects is neglected in production planning processes. Because of the growing pressure from politics and customers, sustainable production of products is becoming more important. One possibility for supporting sustainable manufacturing is, to integrate sustainable aspects in the production planning process. This paper presents input and output information for current PPC systems and discusses the need for additional information necessary for sustainable PPC. For this approach, a text review of cooperate social responsibility (CSR) reporting indicators provided by the GRI was performed. Based on the text review, an input-output model has been developed for conventional and another one for sustainable PPC systems. Through the comparison of the two input-output models, challenges and requirements for sustainable PPC systems have been defined as a basis for future work and analyses.     

Ozone facilitated degradation of caffeine using Ce-TiO2 catalyst

The ozone initiated oxidation of 1,3,7-trimethylxanthine (caffeine), commonly found in wastewaters as model compound is reported using cerium (Ce)/titanium dioxide (TiO₂) as catalyst. The effect of pH and loading of ceria on titania were investigated. Effect of reaction conditions on degradation of caffeine based on their pseudo first-order rate constants were compared. The combination of catalyst Ce-TiO₂ and ozone aeration significantly enhanced the degradation of caffeine compared to uncatalysed ozonation. The oxidation of caffeine ensued via the free radical mechanism, through enhanced ozone decomposition into OH radicals. Ce/TiO₂(0.5?wt%) showed good activity in degradation of caffeine at pH 6, in both natural stream and river water samples showing about 60% total organic carbon removal in 2?h ozonation period. Using liquid chromatography-mass spectroscopy, degradation products were analysed. A reaction intermediate and one final product were positively identified. Nano-catalysts with different loadings of Ce on TiO₂ synthesized by sol-gel route were characterized by scanning electron microscope, transmission electron microscopy, BET and powder X-ray diffraction spectrum techniques. The results showed that the material retained a highly ordered mesoporous structure and possessed large surface area.