混凝沉淀-二氧化氯氧化法处理印染废水

介绍了混凝沉淀－ＣｌＯ２氧化法处理印染废水的反应机理,工艺流程,处理效果及经济效益分析。在２个工厂的实际应用表明,该法工艺简单,操作方便,投资少,效果好。     

双氧水协同生化法处理实际印染废水

研究了双氧水协同水解酸化-接触氧化系统对实际印染废水的处理效果,并与完全生化处理系统进行对比。将100.0 mL经稀释的浓度为3 mL·L-1的双氧水溶液,用蠕动泵以1.67 mL·min-1的速度投加至正常运行的水解酸化体系底部,投加频率1 次·d-1。结果表明,水解酸化体系对COD的去除率为23%~46%,氨氮去除率在-93%~+8.5%之间波动,出水色度为125~150 倍;而接触氧化体系COD去除率提高至39%~59%,氨氮去除率接近100%,出水色度为100~125 倍。采用16S?rDNA?宏基因组高通量测序技术,对比分析了双氧水协同生化处理系统和完全生化处理系统内的微生物菌群结构差异,发现双氧水可洗脱水解酸化污泥中的部分厌氧菌,促进优势菌门Proteobacteria（变形菌）和Bacteroidetes（拟杆菌）的富集,有助于脱色,并有助于洗脱接触氧化体系中的部分非优势菌,刺激Nitrospirae（硝化螺旋菌）的生长,促进脱氮作用。     

固定化微生物技术在印染废水处理方面的研究进展

从固定化方法、固定化载体以及固定化微生物的选择等方面全面系统地介绍了固定化微生物技术处理印染废水的研究进展及应用现状,并展望了固定化微生物技术应用前景。     

Trace metal emissions from co-combustion of refuse derived and packaging derived fuels in a circulating fluidized bed boiler

Energy recovery from refuse derived fuels (RDF) and packaging derived fuels (PDF) is one option in integrated waste management. Nine RDF and PDF co-combustion tests with peat and coal in a circulating fluidized bed boiler were carried out in this work. Heavy metal emissions in flue gas and fly ash were measured. Multivariate data analyses were used to find out the most important parameters affecting metal emissions in the flue gas.

The results showed that total heavy metal emissions were low. Although RDF and PDF had more heavy metals than peat and coal, the multivariate data analysis showed that an increase of the RDF or PDF share in the fuel mixture up to 20% did not correlate directly with the metal emissions in the flue gas. Distribution of Cd, Cu, Zn and Sn between flue gas and fly ash correlated with each other. Injection of limestone to bind sulphur and chlorine did not have a significant effect on heavy metal emissions in the flue gas. Heavy metals concentrated on the fly ash, but all fly ashes passed the EPA-TCLP tests.     

印钞废水处理工艺的改进实验

印钞废水属高浓度难降解有机废水,对环境污染严重。鉴于现有处理工艺出水普遍不达标的情况,通过对比实验确定了改进方案:超滤浓缩液离心出水在进入接触氧化池前,增加新的处理单元(Fenton氧化-混凝)。Fenton氧化最佳条件:FeSO4.7H2O投加量14 g/L,H2O2的投加量34 mL/L,初始pH值6.0,氧化反应时间1.5h,温度18.8℃;混凝过程最佳条件:PAC投加量4 g/L,PAM(5‰)投加量10 mg/L,pH值7。新增单元对废水中COD去除率接近80%,可生化性提高1.6倍,色度降低36%。     

构建中国快递行业包装废弃物产业链对环境影响重要性研究

互联网和电子商务的快速发展带动了快递行业的飞速发展,使社会对快递包装物的需求增加.庞大的快递废弃物给环境造成了严重的破坏.然而由于相关法律不健全、回收体系不完整、企业不积极以及回收渠道少等原因导致了中国的快递包装废弃物回收率非常低.构建快递包装废弃物回收产业链,并降低快递包装废弃物对环境造成的影响就成了社会经济发展的一个迫切需要.为此推广环保材料和环保产品以及提高消费者环保意识入手,构建快递包装废弃物回收产业链势在必行.     

Polymer Barrier Films

Many polymers such as polyolefins (polyethylene, polypropylene), poly(vinyl chloride), aliphatic polyamides, poly(ethylene terephthalate), polycarbonate, and others are used as protective barrier films against the mass transport of small molecules of gases, vapors, and liquids (known as diffusates, permeants) in different applications. The barrier properties depend on the polymer characteristics such as solubility, diffusion, permeability, and others, the nature of the fluid, temperature, and other factors. Mainly polymer barrier film application in packaging, construction, and agriculture are discussed.     

高浓印染废水处理工程的设计审计与运行结果分析

通过对漂染厂生产工艺过程及排废状况进行审计研究，提出了有针对性的废水处理工艺流程，区别对待废水浓度、污染物成分、化学作用及其工艺原理，实现了废水处理各工艺段的适配与综合节能的协调，在保证废水高效达标处理的前提下使工程优化     

印刷环节挥发性有机物无组织排放特征测定研究

对使用溶剂型油墨的凹版印刷设备和使用水性油墨的柔版印刷设备无组织排放的挥发性有机物(VOCs)浓度进行了实际监测,并采用计算流体动力学模拟无组织排放VOCs的收集效率。结果表明：(1)使用溶剂型油墨的凹版连续印刷过程非甲烷总烃(NMHC)最高均值达到5 975.67 mg/m³,约为使用水性油墨的柔版印刷(191.67 mg/m³)的31.2倍。虽然使用水性油墨可明显降低NMHC的排放,但其操作空间的浓度依然存在超过《工作场所有害因素职业接触限值第1部分：化学有害因素》(GBZ 2.1—2019)的现象。(2)印刷车间应该设置专门的调墨室,能缓解印刷车间内挥发性污染气体浓度的波动。(3)计算流体动力学模拟显示,设置合理的集气罩可有效降低VOCs的无组织排放,收集效率为70%～75%。     

Assessment of plastic packaging waste: Material origin,methods, properties

The global plastics production has increased annually and a substantial part is used for packaging (in Europe 39%). Most plastic packages are discarded after a relatively short service life and the resulting plastic packaging waste is subsequently landfilled, incinerated or recycled. Laws of several European and Asian countries require that plastic packaging waste collected from households has to be sorted, reprocessed, compounded and reused. These recycling schemes typically produce milled goods of poly(ethylene terephthalate) (PET), poly(ethylene) (PE), isotactic poly(propylene) (PP), mixed plastics, and agglomerates from film material. The present study documents the composition and properties of post-consumer polyolefin recyclates originating from both source separation and mechanical recovery from municipal solid refuse waste (MSRW). The overall composition by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) were determined and compared with the sorting results of the sorted fractions prior to the reprocessing into milled goods. This study shows that the collection method for the plastic packaging waste has hardly any influence on the final quality of the recyclate; however, the sorting and reprocessing steps influence the final quality of the recyclate. Although the mechanical properties of recyclate are clearly different than those of virgin polymers, changes to the sorting and reprocessing steps can improve the quality.