精品意识在教学过程中的实施

以教师、课程与教材、课堂、科研等要素为出发点,提出了精品意识在教学过程中的实施方法。     

火灾高温下CFRP加固钢筋混凝土梁温度场分析

综合国外CFRP加固混凝土结构抗火试验相关研究,总结了CFRP的高温热工性能参数。用ANSYS软件对火灾高温下不同情况(无防火保护层和有防火保护层)和不同工况(防火涂料涂抹形式)下CFRP加固后的钢筋混凝土梁进行了温度场数值模拟研究。结果表明,防火涂料厚40 mm时,梁耐火极限可达2.5小时以上,且底面和两侧面全面涂抹防火涂料的防火效果最好。本文研究有助于进一步深入认识CFRP加固钢筋混凝土结构在高温下的力学性能和耐火极限,且对CFRP加固后的结构防火设计具有一定的指导意义。     

射流曝气SBR技术在屠宰废水治理中的应用

介绍了应用射流曝气和序列间歇式活性污泥（ＳＢＲ）治理屠宰废水的工程实例。半年多的运行情况表明，该系统具有很好操作性和稳定性，当系统污水排放量或有机负荷发生较大波动时，有较好的缓冲适应能力，并能保证整个系统稳定达标。     

建筑材料隐含环境影响评估

我国建筑业快速发展,建筑开发使用大量的建筑材料给资源和环境带来严重负荷.以上海市为案例,运用生命周期评价方法,基于北京工业大学和Ecoinvent数据库中的建筑材料生产数据,采用ReCiPe法对上海市建筑物的材料隐含环境影响进行评估,并对未来的环境影响潜值进行预测.结果表明:在上海市居住建筑和非居住建筑所产生的各类环境影响中人类毒性、金属损耗最为突出,约占总环境影响的45%和20%;环境影响主要来源于钢筋和木材的生产,对各类环境影响贡献度分别约为47%、17%;高层居住建筑和非居住建筑中的工厂建筑物化环境影响在各自类型中所占比例最高.按现有趋势发展,2020年上海市居住建筑开发规模和环境影响潜值均将达到2014年的1.52倍,非居住建筑则可达到2014年的1.14倍.针对上海市建筑材料环境影响分析结果,为有效减轻上海市建筑物的环境影响,需重点关注钢筋、铝材、木材以及混凝土的生产,识别生产过程中污染物转移环节进而改进工序;在设计阶段考虑选择环境影响负荷低的绿色建材,如混凝土砌块、高性能混凝土等,从而降低环境影响;同时,应重点关注隐含环境负荷高的高层居住和工厂建筑类建筑,通过降低建材使用量等方案降低环境影响.      

国内外军工材料环境试验现状及发展趋势

介绍军工材料环境试验对提高装备环境适应性的重要作用。从不同的技术方面,分析了国内外军工材料环境试验的现状、发展趋势以及主要差距。从规划的制定、新技术新方法的研发以及信息共享方面,提出设想。提出了目前需要研发新的环境试验、评价、管理方法和需要突破的关键技术。     

五大连池老黑山火山的两次喷发活动

老黑山是五大连池火山群中最年轻的火山.通过对老黑山火山锥体结构及其形态分析指出,老黑山火山并非单锥,而是由先、后不同时期形成的两个锥体叠加组成的复合锥,表明它有两次喷发活动.通过对新发掘出的史料的分析,进一步指出,老黑山火山的第一次喷发时间为1720(不是1719年)-1721年,第二次可能为1776年.两次喷发活动的确认为研究老黑山火山喷发历史、喷发过程、喷发危险性评价和灾害预测等提供了新依据.     

蚯蚓土壤填料生态滤池处理生活污水

采用二级蚯蚓土壤填料生态滤池对生活污水进行处理,考察其对污水中各类污染物的去除效果。连续运行90d,试验结果表明:滤池运行稳定,对COD、TP、NH3-N、TN和SS的去除效果良好,平均去除率分别为78.7%、93.4%、74.9%、60.4%和87.5%,出水满足GB 1898—2002《城镇污水处理厂污染物排放标准》二级标准。滤池二级串联结构设计系统稳定,改善了出水水质。蚯蚓在试验初期对滤池环境可较好较快的适应,维持了滤池的稳定运行。土壤生态处理技术工艺简单,兼具经济实用和规模灵活的优点,适合推广。     

生物膜填料塔处理浓度有机废气的工业应用试验研究

工业应用试验研究表明，生物膜填料塔处理工业有机废气是可行的，当运行条件控制适当时，净化效率可保持在90％以上，能够实现达标排放，这一成果填补了我国环保工业技术领域的空白，工程技术上接近现阶段国外的技术研究水平。     

Immobilization of lead in anthropogenic contaminated soils using phosphates with/without oxalic acid

Understanding the effects of oxalic acid(OA) on the immobilization of Pb(Ⅱ) in contaminated soils by phosphate materials, has considerable benefits for risk assessment and remediation strategies for the soil. A series of phosphate amendments with/without oxalic acid were applied to two anthropogenic contaminated soils. We investigated the immobilization of Pb(Ⅱ) by KH2PO4, phosphate rock(PR), activated phosphate rock(APR) and synthetic hydroxyapatite(HAP) at different phosphate:Pb(P:Pb) molar ratios(0, 0.6, 2.0 and 4.0) in the presence/absence of 50 mmol oxalic acid/kg soil, respectively. The effects of treatments were evaluated using single extraction with deionized water or Ca Cl2, Community Bureau of Reference(BCR) sequential extraction and toxicity characteristic leaching procedure(TCLP)methods. Our results showed that the concentration of water extractable, exchangeable and TCLP-Pb all decreased with incubation time. The concentration of water-extractable Pb after120 days was reduced by 100% when soils were amended with APR, HAP and HAP + OA, and the TCLP-Pb was 5 mg/L for the red soil at P:Pb molar ratio 4.0. Water-soluble Pb could not be detected and the TCLP-Pb was 5 mg/L at all treatments applied to the yellow-brown soil. BCR results indicated that APR was most effective, although a slight enhancement of water-soluble phosphate was detected at the P:Pb molar ratio 4.0 at the beginning of incubation. Oxalic acid activated phosphates, and so mixing insoluble phosphates with oxalic acid may be a useful strategy to improve their effectiveness in reducing Pb bioavailability.     

Lower back pain and its association with whole-body vibration and manual materials handling among commercial drivers in Sabah

A cross-sectional study was undertaken to determine the prevalence of lower back pain (LBP) and its association with whole-body vibration (WBV) and manual materials handling (MMH). We studied 110 commercial vehicle drivers using a self-administered questionnaire and the VI-400Pro human vibration monitor. Prevalence of LBP was 66.4%. The percentage of drivers who had frequent manual handling of heavy loads was 45.5% and those who handled heavy loads in awkward postures accounted for 86.4%. Daily vibration A(8) averaged on the z axis was 0.25 (0.06) m·s^?2 and at vector sum was 0.29 (0.07) m·s^?2. Daily vibration exposures on the z axis, frequent manual handling of heavy loads and awkward posture during MMH were significantly associated with LBP. Drivers who are exposed to WBV and frequently handle heavy loads manually and with awkward postures probably have more LBP than drivers who are exposed to only one of these risk factors.