电催化同步降解水中硝酸盐氮和有机氯化物的研究

在利用电化学反应器单独脱硝脱卤的电催化实验基础上,对电化学催化方法同步脱硝脱卤进行研究.试验采用化学沉积法负载钯-铜合金(4∶ 1)的多孔钛板作为电解反应器阴极,电解硝酸盐氮(NO-3-N)和五氯酚(PCP)的混合溶液.结果表明: PCP的脱卤效果与单独脱卤时相似,但PCP的存在对NO-3-N的还原脱除有明显影响.PCP在钯原子上的竞争性吸附抑制了NO-3-N还原反应的中间产物NO-2-N继续还原,导致在反应初期出现NO-2-N的积累;随着PCP的充分还原,前期积累的副产物NO-2-N可以逐渐被降解.分批试验和推流试验结果表明,利用多孔钛板负载的钯-铜二元合金电极,选择合适的反应参数,可有效地脱除水中的硝酸盐氮和卤代有机物.     

UV/TiO2光催化还原Cr(Ⅵ)过程中吸附作用的影响及其消除

研究了水体中Cr(Ⅵ)离子在UV/TiO₂体系中光催化还原过程.结果表明,Cr(Ⅵ)离子UV/TiO₂光催化还原过程符合Langmuir-Hinshelwood动力学规律.不存在有机物时,TiO₂吸附作用是该反应的前提.pH=1.5～2.5时吸附性能较好,而且pH=1.5～10的初始反应速率同pH值有线性关系.在TiO₂表面的竞争吸附能力按PO₄^3->SO₄^2->Cl^->NO₃^-依次减弱.甲酸、甲醛有机物的协同作用可提高Cr(Ⅵ)离子的光催化还原速率和效率,并消除由暗态吸附对反应所起的作用,磷酸根离子极强的竞争吸附能力,使有机物的协同作用减弱.     

钙法提钒尾渣的浮选脱硫试验

根据钙法提钒尾渣的矿物特性,采用浮选法分离其中的石膏以实现脱硫,分别考察了矿浆pH、矿浆液固比、捕收剂添加量及浮选中水循环次数等因素对浮选指标的影响,并进行了理论分析,确定了钙法提钒尾渣浮选脱硫的优选工艺参数.试验结果表明,在矿浆pH为7、矿浆液固比为5:1、捕收剂添加量为0.6～0.8 kg/t的条件下,可获得w(S...     

单宁为模板制备纳米二氧化钛 及其对钍的吸附性能

以杨梅单宁(BT)为模板,水热法合成纳米二氧化钛(BT-NTO)。采用XRD、FTIR、SEM和TEM技术对BT-NTO的结构及形貌进行了表征。将BT-NTO用于吸附溶液中的Th~(4+),在溶液pH为3.5、温度为25℃、Th~(4+)初始浓度为0.5 mmol/L的条件下,BT-NTO对Th~(4+)的吸附量为0.905 8 mmol/g;吸附过程符合准二级动力学方程和Langmuir等温吸附方程;溶液中共存的Zn~(2+)、Ni~(2+)、Co~(2+)、Sr~(2+)、Yb~(3+)、Nd~(3+)、Sm~(3+)、Gd~(3+)、La~(3+)、Cl-、ClO4-离子对Th~(4+)吸附量影响较小;BT-NTO的重复使用性能较好。     

CeO2/TiO2纳米管催化剂脱硝性能研究

利用废气中本身含有的CO催化还原烟气中的NO_x,可以实现以废治废。采用TiO₂纳米管负载CeO₂,制备CeO₂/TiO₂纳米管催化剂,并对其进行了SEM表征及影响因素实验。实验结果表明：在n（Ce）∶n（Ti）=3∶7、焙烧温度500 ℃、焙烧时间3 h时制备的CeO₂/TiO₂纳米管催化剂形貌较好,表面颗粒分布相对均匀;反应温度400~600 ℃时NO脱除率达98%;该催化剂具有一定的抗氧性能;当n（SO₂）∶n（NO）=（1∶2）~（2∶1）时,NO脱除率仍然在95%以上。     

纳米晶粒TiO2多孔微球的制备及其光催化性能的研究进展

介绍了纳米晶粒TiO2多孔微球的主要制备方法、主要参量及表征、光催化性能研究进展,指出了纳米晶粒TiO2多孔微球制备过程的技术关键与基本参量的功能。针对目前存在的问题,提出了今后的主要研究方向,并展望了纳米晶粒TiO2多孔微球在水处理领域的应用前景。     

氟石膏废渣改性生产粉刷石膏研究

氟石膏是化工生产排出的废渣,主要物相组成为Ⅱ型无水石膏(CaSO4)。以氟石膏为原料,掺加激发剂进行改性,辅以适量保水剂、掺合料、引气剂等外加剂,磨细混匀后即得建筑抹灰用粉刷石膏。经测试,粉刷石膏的技术性能指标均符合国家行业标准要求。氟石膏废渣改性生产粉刷石膏既有利于环境保护,又能获得良好的经济效益,是其资源化利用的一条新途径。     

Photodegradation of Oryzalin in aqueous isopropanol and acetonitrile

The phototransformation of Oryzalin was studied under UV light (λ_max ≥ 290 nm) and sunlight (λ_max ≥ 250 nm) in aqueous isopropanol and acetonitrile solution in absence and presence of TiO₂ as sensitizer. The rate of photodegradation of Oryzalin in different solvent system followed first-order kinetics, and calculated half-lives were found to be in the range of 23.52-53.75 h for UV light and 41.23-61.43 h for sunlight. From this study, total 12 photoproducts were identified and characterized on the basis of column chromatography and Q-Tof micromass spectral data. The plausible mechanism of phototransformation involved was hydrolysis, breaking of sulfonic bond, and loss of amino and sulfonic acid group.     

Conceptual issues in designing a policy to phase out metal-based antifouling paints on recreational boats in San Diego Bay

In marine areas throughout the world where recreational boats are densely located, concentrations of copper in the water are being found to be in excess of government standards, due to the hull coatings used on these boats. Copper-based hull coatings are intended to be antifouling in that they retard the growth of algae, barnacles and tubeworms; but alternatives exist that can eliminate the harm that copper contamination does to marine organisms. A variety of policy options are available to mandate or provide economic incentives to switch to these less harmful alternatives. This paper puts forth a conceptual framework for thinking about how to design and evaluate alternative policies to transition to nontoxic boat hulls, drawing from the authors' experience designing a policy for use in San Diego Bay. Many of the issues raised are broadly applicable to environmental problems where the solution involves a large-scale replacement of durable consumer goods.     

Leaching of copper and zinc from spent antifouling paint particles

Leaching of Cu and Zn from a composite of spent antifouling paint particles, containing about 300 mg g⁻¹ and 110 mg g⁻¹ of the respective metals, was studied in batch experiments. For a given set of simulated environmental conditions, release of Cu was independent of paint particle concentration due to attainment of pseudo-saturation, but Zn was less constrained by solubility effects and release increased with increasing particle concentration. Leaching of Cu increased but Zn decreased with increasing salinity, consistent with mechanisms governing the dissolution of Cu₂O in the presence of chloride and Zn acrylates in the presence of seawater cations. Because of complex reaction kinetics and the presence of calcium carbonate in the paint matrix, metal leaching appeared to be greater at 4 °C than 19 °C under many conditions. These findings have important environmental and biological implications regarding the deliberate or inadvertent disposal of antifouling paint residues.