聚硫氯化铝絮凝效果及在水处理中的应用

采用聚硫氯化铝（ＰＡＣＳ）为絮凝剂进行废水处理试验,对其絮凝效果及影响因素进行了研究,试验结果表明,ＰＡＣＳ的ＳＯ４＾２－含量,碱化度,投加量和水的ｐＨ对絮凝效果有影响,当Ａｌ＾３＋／ＳＯ４＾２－（摩尔比）为１４￣１６,碱化度为６５％￣７０％,ｐＨ为６￣９、ＰＡＣＳ投加量为２￣４ｍｇ／Ｌ时,絮凝效果最佳,试验结果还表明,ＰＡＣＳ比聚氯化铝（ＰＡＣ）的絮凝效果好。     

Polyvinyl chloride used as a chlorinating and a reducing agent

Polyvinyl chloride (PVC) or vinyl is a recyclable material. It can be used as a chlorinating and a reducing agent. Two tests of chlorination and reduction of two different samples of jarosite and hematite were realized using PVC, results are presented in this paper. The chlorination test shows that the HCl gas produced from PVC and heated at ≈250°C can be used as a chlorine source to recover as chlorinated compounds the valuable metals such as Zn, Pb contained in jarosite. The XRD reveals the presence of lead and zinc chlorides in the condensates obtained. The second test of reduction was conducted using a mixture of PVC and hematite treated in a nitrogen atmosphere between 200 and 1000°C. The results show that at low temperature, PVC produces HCl and with kinetic consideration, no reactions can be observed with hematite. However, at high temperature, the weight of the hematite sample decreases by ≈15%, due to the reduction of hematite to iron metal.     

聚合铝混凝过程研究:不同形态硅酸的影响作用

研究了不同形态硅酸对聚合铝混凝过程的影响作用 .实验结果表明经预制形成的具有不同形态分布组成的硅酸与聚合铝 ,在投加后相互间发生了十分复杂的物理化学作用 ,并受溶液pH值的影响 ,从而最终决定了混凝效果 .反应过程中所生成的形态产物及其物化特征 ,很大程度上取决于聚合铝碱化度以及所投加的Si Al比 .其中碱化度越高 ,最终产物所带电荷越高 .而不同硅酸所起影响作用分别取决于聚合程度 ,在与聚合铝反应过程中表现出一定的规律性 .单体硅酸与单体铝迅速发生较强的络合作用 ,抑制了多聚水解铝阳离子的形成 .聚合硅酸则倾向于与聚合铝形态相互作用形成一定的胶状化合物 ,从而在溶液中稳定存在 .对于胶体硅酸 ,在聚合铝作用下迅速凝聚形成更大的聚集体 ,在颗粒物间架桥形成粗大的絮体 .所得结果对混凝机理的解释与复合混凝剂的发展提供了一定的参考作用     

Simulated and experimental evaluation of factors affecting the rate and extent of reductive dehalogenation of chloroethenes with glucose

Carbohydrates such as molasses are being added to aquifers to serve as electron donors for reductive dehalogenation of chloroethenes. Glucose, as a model carbohydrate, was studied to better understand the processes involved and to evaluate the effectiveness for dehalogenation of different approaches for carbohydrate addition. A simulation model was developed and calibrated with experimental data for the reductive dehalogenation of tetrachloroethene to ethene via cis-1,2-dichloroethene. The model included fermentors that convert the primary donor (glucose) into butyrate, acetate and hydrogen, methanogens, and two separate dehalogenator groups. The dehalogenation groups use the hydrogen intermediate as an electron donor and the different haloethenes as electron acceptors through competitive inhibition. Model simulations suggest first that the initial relative population size of dehalogenators and H(2)-utilizing methanogens greatly affects the degree of dehalogenation achieved. Second, the growth and decay of biomass from soluble carbohydrate plays a significant role in reductive dehalogenation. Finally, the carbohydrate delivery strategies used (periodic versus batch addition and the time interval between periodic addition) greatly affect the degree of dehalogenation that can be obtained with a given amount of added carbohydrate.     

钛白副产硫酸亚铁的综合利用研究

以钛白副产硫酸亚铁、氯化钾和氨水为原料，采用硫酸钾铵法制取硫酸钾。实验结果表明，该工艺生产的产品，其质量达到ZBG-21006-89国家标准，且此工艺流程简单、操作方便、条件易控制，无二次污染。     

Significance of platinum group metals emitted from automobile exhaust gas converters for the biosphere

Intention, Goal, Scope, Background  Following the introduction of automobile catalytic converters the platinum group metals (PGM) platinum (Pt), palladium (Pd) and rhodium (Rh) gain on increasing interest in environmental research as these metals are emitted with exhaust fumes into the environment. Consequently, elevated PGM levels were found in different environmental matrices uch as road dusts, soils along heavily frequented roads, sediments of urban rivers etc. Accordingly, the effects of increasing PGM emissions on the biosphere are controversially discussed. Objective  This paper summarizes the present knowledge on the biological availability of PGM to plants and animals. As biological availability is one of the most decisive factors determining the toxicologi-cal potential of xenobiotics, this information is very important to evaluate the possible threat of the noble metals to ecosystems. Results and Discussion  The availability of soluble as well as particle bound PGM to terrestrial plants was demonstrated in several studies. Experimental investigations revealed uptake of Pt, Pd and Rh also by aquatic plants. Additionally, the biological availability of the noble metals for animals has been verified in experimental studies using soluble metal salts, catalytic converter model substances, sediments of urban rivers, road dust or tunnel dust as metal sources. These studies refer mainly to aquatic animals. Beside of free living organisms, in particular worms parasitizing fish demonstrated a high potential to accumulate PGM. This could be of great interest in respect of biomonitoring purposes. Generally, for plants as well as for animals Pd turns out to be the best available metal among the PGM. Compared to other heavy metals, the biological availability of PGM from road dust to zebra mussels(Dreissena polymorpha) ranged between that of Cd and Pb. Conclusion  Especially chronic effects of PGM on the biosphere can not be excluded due to (1) their cumulative increase in the environment, (2) their unexpected high biological availability and bioaccumulation and (3) their unknown toxicological and ecotoxicological potential. However, it appears that acute effects on ecosystems due to anthropogenic PGM emission are not likely. Recommendation and Outlook  Research on environmental PGM contamination of the biosphere, especially the fauna, and on long-term toxiciry of low PGM concentrations is highly appreciated. These studies require very sensitive analytical techniques to determine PGM even in low sample amounts. Research has to be done in particular on reliable determination of (ultra) trace levels of Pd and Rh as the lack of data on these two metals is mainly due to analytical problems.     

Chlorination of dibenzofuran and dibenzo-p-dioxin vapor by copper (II) chloride

Dibenzofuran (DF) is formed from phenol and benzene in combustion gas exhaust streams prior to particle collection equipment. Subsequent chlorination at lower temperatures on particle surfaces is a potential source of chlorinated dibenzofuran (CDF). Gas streams containing 8% O₂ and approximately 0.1% DF vapor were passed through particle beds containing copper (II) chloride (0.5% Cu, mass) at temperatures ranging from 200 to 400 °C to investigate the potential for CDF formation during particle collection. Experiment duration was sufficient to provide an excess amount of DF (DF/Cu=3). The efficiency of DF chlorination by CuCl₂ and the distribution of CDF products were measured, with effects of temperature, gas velocity, and experiment duration assessed. Results of a more limited investigation of dibenzo-p-dioxin (DD) chlorination by CuCl₂ to form chlorinated DD (CDD) products are also presented.

The efficiency of DF/DD chlorination by CuCl₂ was high, both in terms of CuCl₂ utilization and DF/DD conversion. Total yields of Cl on CDF/CDD products of up to 0.5 mole Cl per mole CuCl₂ were observed between 200 and 300 °C; this suggests that nearly 100% CuCl₂ was utilized, assuming a conversion of two moles of CuCl₂ to CuCl per mole Cl added to DD/DF. In a short duration experiment (DF/Cu=0.3), nearly 100% DF adsorption and conversion to CDF was achieved. The degree of CDF chlorination was strongly dependent on gas velocity. At high gas velocity, corresponding to a gas–particle contact time of 0.3 s, mono-CDF (MCDF) yield was largest, with yields decreasing with increasing CDF chlorination. At low gas velocity, corresponding to a gas–particle contact time of 5 s, octa-CDF yield was largest. DF/DD chlorination was strongly favored at lateral sites, with the predominant CDF/CDD isomers within each homologue group those containing Cl substituents at only the 2,3,7,8 positions. At the higher temperatures and lower gas velocities studied, however, broader isomer distributions, particularly of the less CDD/CDF products, were observed, likely due to preferential destruction of the 2,3,7,8 congeners.     

高铁铝矾土制备聚合氯化铝铁及其在污水处理中的应用研究

利用含铁的低品位铝矾土为主要原料,添加适量铝酸钙粉,制备出絮凝剂聚合氯化铝铁.制备方法为酸溶两步法.对影响聚合铝铁制备的因素,如盐酸浓度、盐酸用量、温度和铝酸钙粉用量等进行了系统研究,得到了制备聚合铝铁的优化条件,同时将该絮凝剂用于实际工业污水的处理.研究结果表明：制备的絮凝剂絮凝效果明显优于一些传统的絮凝剂;不仅具有去浊性能好、沉降快的优点,而且具有原料易得,制备成本低的优势.     

强化混凝去除微污染湖泊水浊度及TOC的研究

通过烧杯混凝试验和动态连续混凝试验,就混凝剂种类、投药量、pH值、水温等因素,研究强化混凝对水中浊度和TOC去除效果的影响。试验结果表明:PAC最佳投量为30mg/L,浊度去除率为90.19%,TOC去除率为38.2%,水温高于20℃时,聚合氯化铝对浊度和TOC去除率分别高达84.95%、33.18%以上。虽然pH值是影响有机物去除的主要参数,动态连续混凝试验表明,不改变pH值,强化混凝工艺依然能极大地改善出水水质,滤后水质浊度为0.1NTU,TOC为6.23mg/L。     

一起有机硅工厂燃爆事故的应急监测案例分析

本文介绍了绍兴市袍江工业区"2.20"浙江恒业成有机硅有限公司燃爆事故的应急监测,在监测过程中确立了气、水等环境介质作为监测对象,确定含硅有机物和氯化氢作为主要监测因子,并根据实际情况合理地选择了监测方法,以为事故的应急处理提供借鉴。