分子连接性指数(mJ)与有机物毒性的相关性

定义原子特征值δ     

一级动力学反应方程参数估计中若干问题的讨论

在农药的环境行为研究中,常用一级动力学反应方程来模拟农药的降解或残留。本文论述了用线性回归分析法估计一级化学动力学方程参数时存在的初始浓度飘移和非本义最优化问题,讨论了与此相关联的试验设置、安全间隔期、分段模拟和试验数据处理等问题,提出了解决问题的初步设想。     

脱硫石膏液相法生产高强度α-石膏的工艺研究

脱硫石膏是火电厂烟气脱硫副产物,由于其粒径较细、颗粒分配不均,煅烧生产比天然石膏困难,而液相法工艺适合脱硫石膏生产高强度α-石膏。对脱硫石膏液相法生产高强度α-石膏的工艺参数进行了研究,通过对反应转晶剂添加量、转化温度、压力及反应时间等参数调整,得到了脱硫石膏生产的合理参数。     

A Study of Dynamic Mechanical and Thermal Behavior of Starch/Poly(vinylalcohol) Based Films

Starch/Poly(vinylalcohol) blends in two different ratios (60:40 and 50:50) were prepared with glycerol as a plasticizer. Films were cast by a solution casting method. One set of films were filled with 10 wt% of bentonite clay and another set of films were crosslinked with epichlorohydrin in an alkaline medium. The prepared film samples were characterized with dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA). The presence of clay and crosslinking with epichlorohydrin was found to have considerable effect on the dynamic mechanical properties and thermal stability of the films. Intercomponent H-bonding between starch, Poly(vinylalcohol) and glycerol enhanced the thermal stability of the films. But incorporation of clay and crosslinking with epichlorohydrin enhanced the steric crowding and lowered the thermal stability of the films.     

筑坝反滤料动模量和阻尼比试验的颗粒流模拟

以筑坝反滤料的室内中型动三轴试验结果为基础,运用离散单元法中的二维颗粒流方法建立了轴对称数值试样模型,通过控制加荷过程中试样体积不变的方法,模拟了不排水加载条件下反滤料的动模量和阻尼比试验。调整颗粒的细观接触参数,与真实试验结果进行比较分析,在得到符合实际结果的宏观力学响应的同时,分析了配位数、孔隙率和超孔隙水压的变化,并从微观角度对动三轴试验进行了探讨。讨论了固结比和密实度对动模量的影响,认为粗粒反滤料的固结比对最大动模量的影响比较符合H ard in推导公式的结果。结果表明,颗粒流方法可以较好地模拟反滤料的动模量和阻尼比试验,试验过程中微观方面的表现也符合实际室内试验的规律。     

大空间建筑火灾下钢索的力学反应参数分析

钢索在大空间建筑火灾升温条件下的力学反应是评价索网结构抗火性能的关键依据。基于非线性有限元方法,建立了钢索在高温下的力学分析模型,模拟了大空间建筑火灾升温历程中钢索力学反应全过程,用参数分析方法得到影响钢索在火灾升温历程中力学反应的关键因素。结果表明:在大空间建筑火灾升温历程中,钢索的水平张力呈下降的趋势;随着钢索的预应力比增加、温度场非均匀性的增强和跨度的增加,其水平张力下降速率增大;荷载比的增加对水平张力下降速率影响较小。上述结论与钢索水平张力的解析解一致,可为索网结构抗火性能分析提供参考。     

黄土边坡动力响应分析

运用有限差分软件FLAC3D,建立了某一黄土边坡三维模型,首先对其在地震作用下的动力响应规律进行了总结,然后探讨了地震动参数对黄土边坡动力响应的影响。结果表明:黄土边坡对地震波存在垂直放大和临空面放大作用;当输入地震波振幅或频率增加时,坡面监测点加速度放大系数随坡高增加呈"增加→衰减→增加"的三段形态;速度放大系数随坡高的增大而增大,并在坡顶达到最大值;位移放大系数随振幅和频率的增加而增加;地震持时对加速度、速度峰值的影响不大,但坡体位移随持时的增加而显著增加。强震作用下的最大剪应变增量区域的位置和形状表明,黄土边坡的破坏模式仍是沿着某一弧形潜在滑动面失稳破坏。研究结果有助于进一步揭示黄土边坡在地震作用下的失稳机制,为黄土地区边坡抗震设计与防灾减灾提供参考。     

电连接器可靠性试验夹具的设计方法研究

文章简要阐述了电连接试验测试夹具的种类及其使用必要性,对电连接器电气参数测试夹具和力学振动夹具这两种夹具的设计原则、参数确定和试验验证等方面进行了重点阐述,并给出力学振动夹具的验证方法和验证指标。     

工艺参数对表面活性剂洗涤修复PAHs污染土壤的影响

采用土壤洗涤(soil-washing)技术,分别用TritonX-100和Tween-80为强化洗涤剂研究了搅拌强度、洗涤时间、表面活性剂浓度、液固比、温度和间歇搅拌6个工艺参数对PAHs污染土壤洗涤效果的影响。通过一系列烧杯搅拌实验得到最佳洗涤工艺参数。TritonX-100和Tween-80的最佳洗涤时间分别是30 min和60 min,其他工艺参数最佳条件均相同。分别是搅拌强度为250 r/min,表面活性剂浓度为5 g/L,液固比为10∶1,温度为室温和连续搅拌。在此最佳工艺参数条件下,污染土中PAHs的残留率<10%,基本上满足目标污染物的修复目标。应用表面活性剂强化洗涤技术修复PAHs污染土壤是合理和可行的。     

An integrated approach for improving energy efficiency of manufacturing process chains

The rising energy prices and increasingly imposing regulations have drawn attention for improving the energy efficiency of manufacturing processes. Over the past decade, different approaches have been developed to target from individual unit processes to entire manufacturing systems. However, each model or approach has limitations in terms of the efficiency improvement. Thus, an integrated approach is proposed to overcome these limitations combining unit process energy consumption models with production system simulation. The outcome potentially leads to a more energy-efficient production and process planning, which considers the dynamics of individual processes as well as the entire system. Two case studies are presented to demonstrate the approach and its benefits.