Spatiotemporal characterization and regional contributions of O3 and NO2: An investigation of two years of monitoring data in Henan, China

To investigate the characteristics of ground level ozone(O_3) for Henan Province,the ambient air quality monitoring data of 2015 and 2016 were analyzed.The result showed that the 8 h-max-O_3 concentrations displayed a distinct seasonality,where the maximum and minimum values,averaging 140.41,54.19 μg/m~3,occurred in summer and winter,respectively.There is a significant correlation between meteorological factors and O_3 concentration.The Voronoi neighborhood averaging analysis indic ated that O_3,temperature,and ultraviolet radiation in Henan province were decreased from northwest to southeast,while relative humidity and precipitation displayed the opposite trend.Besides meteorological factors,the chemical processes play an essential role in ozone formation.Reactions of NO,NO_2 and O_3 form a closed system,and the partitioning point of the OX-component(O_3+NO_2) was at 40 and 80 μg/m~3 for nitrogen oxide(NO_x) in winter and summer,respectively,with NO_2 dominating at higher NO_x pollution and O_3 being the m ajor component at lower levels.The relationship between oxidant(OX=O_3+NO_2)and NOx concentrations were evaluated to understand the regional and local contribution of OX.It showed that high regional contribution occurred in the spring,whereas the highest local contribution lead to the summer peak of O_3 observed in Zhengzhou.This present study reveals important environment impacts from the photochemical process and the meteorological conditions in the region with better understanding on the O_3 characterization.     

标准气溶胶发生系统的建立与性能评估

针对气溶胶测量仪器校准和实验室气溶胶光学特性研究的需求,搭建了一套标准气溶胶发生系统,并对其性能开展了测试研究.系统采用恒定流量的雾化器产生气溶胶,经过扩散干燥管干燥以及电荷中和器带电中和后,产生标准气溶胶粒子.利用氯化钠样品对系统的性能进行了测试,结果表明,当样品溶液浓度增加时,系统雾化产生粒子的数浓度和粒径均随之增加;当载气气压增加,系统雾化产生粒子的数浓度随之增加,而粒径随之减小.在测试时间内,系统发生的多分散气溶胶粒子的几何平均粒径波动小于1%,总粒子数浓度波动小于2%,单分散气溶胶粒子数浓度的稳定性好于4%.     

固定床活性炭干法烟气脱硫过程的模拟研究

采用流程模拟软件对固定床活性炭干法烟气脱硫过程进行模拟,并用已公开发表的文献实验数据进行了模型验证。模型验证结果与文献值吻合较好。利用该模型对活性炭干法烟气脱硫过程进行模拟研究,探讨了脱硫过程中床层高度、进口烟气中SO_2质量浓度、吸附温度等工艺参数对SO_2脱除率的影响。模拟结果表明:随床层高度增加,SO_2脱除率提高;随进口烟气中SO_2质量浓度增加,SO_2脱除率提高;在吸附温度为100~160℃的范围内,随吸附温度升高,SO_2脱除率逐渐下降。     

Thermal runaway reaction for highly exothermic material in safe storage temperature

Highly exothermic materials have caused many serious accidents involving storage and transportation, due to being thermally reactive. The safe storage and management of these materials is still a critical problem in many countries. Our aim was to study the thermal hazard of thermal reactive materials, such as a propellant, by employing differential scanning calorimetry (DSC) non-isothermal tests and isothermal tests, and then comparing the kinetic parameters by isothermal and non-isothermal of kinetics. The chosen approach was to obtain reliable thermal decomposition by a safe and effective method, which acquired the kinetic and safety parameters of storage conditions that could be applied as highly exothermic materials' reduction of loss prevention and energy potential for safer design during storage transport and processing operations.     

Assessment of the physico-chemical behavior of titanium dioxide nanoparticles in aquatic environments using multi-dimensional parameter testing

Assessment of the behavior and fate of engineered nanoparticles (ENPs) in natural aquatic media is crucial for the identification of environmentally critical properties of the ENPs. Here we present a methodology for testing the dispersion stability, ζ-potential and particle size of engineered nanoparticles as a function of pH and water composition. The results obtained from already widely used titanium dioxide nanoparticles (Evonik P25 and Hombikat UV-100) serve as a proof-of-concept for the proposed testing scheme. In most cases the behavior of the particles in the tested settings follows the expectations derived from classical DLVO theory for metal oxide particles with variable charge and an isoelectric point at around pH 5, but deviations also occur. Regardless of a 5-fold difference in BET specific surface area particles composed of the same core material behave in an overall comparable manner. The presented methodology can act as a basis for the development of standardised methods for comparing the behavior of different nanoparticles within aquatic systems.     

地震损失经济学评估模型灾损参数的统计研究

地震应急管理有助于震后救灾工作的顺利进行。传统的灾损评估需要有关人员进入现场根据地震破坏情况进行评估,这会影响评估的时效性。通过对地震灾损参数进行统计学研究,利用现有的研究成果,以统计指数、数据包络分析为理论基础,将现有的基于不同房屋结构类型、不同破坏等级的震害矩阵进行降维,确定了灾损参数,并以青海玉树地震为例,运用灾损参数实现了灾损的快速评估。     

朱集矿13-1煤瓦斯参数规律研究

为了采取合理的瓦斯抽采技术,实现矿井安全高效开采,对朱集矿13-1煤瓦斯基本参数进行了现场和实验室测定,得出了瓦斯含量、瓦斯压力、放散初速度,透气性系数、坚固性系数等参数,并对测定结果进行了理论分析,得出了这些参数的基本规律.结果表明:随着开采深度的增加,在一定深度范围内,其瓦斯压力、瓦斯含量呈线性增长,瓦斯压力与瓦斯含量都比较大；煤层钻孔瓦斯衰减系数较大,该煤层的透气性系数较小,D、K值小于其临界值,可判断出该煤层为难抽煤层且有突出危险性.     

贵阳市城区大气颗粒物PM_(2.5)的污染特征与季节变化规律

于2013年6月至2014年5月在贵阳市城区设置采样点,利用国产武汉天虹智能采样器连续一年采集大气颗粒物(PM2.5)样品共357个,采用HOBO U30气象仪同步记录气象数据。气象数据分析表明贵阳市春、秋和冬季均为东北风,夏季多南风且风速较大,全年以东北风为主。结合气象数据分析了贵阳市市区PM2.5污染特征并初步讨论其来源。结果表明:PM2.5日浓度范围为4~193μg/m3,平均值为70±33μg/m3,日超标率为46%。以季节来看,夏季PM2.5浓度最低,冬季最高,秋、春季次之。PM2.5主要来源于工业排放与燃煤污染。与国内其它城市研究相比,处于轻度污染水平。     

西南技术工程研究所, 重庆 400039

目的建立敦煌地区温度、相对湿度和日温差的年极值拟合模型。方法根据当地气象站台温度和相对湿度日记时值数据,连续统计若干年的三要素年极值,采用极大似然法建立各要素年极值的Gumbel模型,同时讨论值域有界类气象因素极值再现期的定义域。结果给出了敦煌地区温度、相对湿度和日温差年极值的Gumbel模型参数。结论敦煌地区各气象因素Gumbel模型位置参数和尺度参数,温度极大值分别为35.193,1.072℃,温度极小值分别为-20.085,1.945℃,相对湿度极大值为95.254%,2.471%,相对湿度极小值为5.837%,1.505%,日温差极大值为20.676,0.777℃,日温差极小值为1.398,0.593℃;相对湿度极大值、相对湿度极小值和日温差极小值的再现期定义域分别为6.3,47和10年。     

实现地表水环境质量评价的一种方法--使用EXCEL自定义函数的新思路

介绍了在EXCEL环境下常用的评价地表水环境质量的方法,通过比较,“带引用参数的Ex-cel自定义函数”集合了多个功能基本相同的自定义函数于一身,不仅能够实现复杂的数据处理与分析,还能象EXCEL的内置函数一样使用方便,能进一步提高工作效率。