通风机站风流间相互影响阻力特性研究*

为研究双风机并联机站进口、出口风流相互影响的机站局部阻力特性,构建机站通风局部阻力计算的数学模型,同时运用相似原理建立双风机并联通风机站实验模型,并佐以数值模拟对比验证,分析计算不同风机间距的无量纲数A、不同扩散器结构参数条件下的综合影响系数Kc。结果表明:A与Kc具有二次函数关系,且存在较优的A,使得Kc值最小;Kc值随着L/Df增加而线性减小。研究结果有利于Kc的选取,为高效率通风机站结构设计提供技术及数据支撑。     

Study on explosion risk of aluminum powder under different dispersions

This paper mainly studied the influence of particle size distribution on the explosion risk of aluminum powder under the span of large particle size distribution. The measurement was carried out with the 20 L explosion ball and the Hartmann tube. The statistical analysis was used to analyze the relevance between the parameters of explosion risk and the particle size parameters. Test results showed that with the increase of particle size, the sensitivity parameter increases and the intensity parameter deceleration decreases. The effect of particle size change on MEC and MIE of small particle size aluminum powder is relatively small but greater impact on Pm and (dP/dt)m. The small particle size components greatly increasing the sensitivity of the explosion and accelerating the rate of the explosion reaction; while the large particle size component contributes to the maximum explosion pressure. D_3,2 particle size dust determines the risk of aluminum powder explosion.     

鼠李糖脂洗脱氯丹和灭蚁灵污染场地土壤的工艺参数

优化了鼠李糖脂洗脱氯丹、灭蚁灵污染土壤的工艺条件,为开展有机氯农药污染场地土壤洗脱修复工程实践提供科学依据和技术参数。实验结果表明,随着洗脱剂———鼠李糖脂浓度的增加,氯丹和灭蚁灵的洗脱量呈现先增加后降低的趋势;洗脱时间和液固比对洗脱效果的影响趋势与浓度相同;在0~120 r/min范围内,氯丹和灭蚁灵洗脱量随着搅拌速度的增加而增大,80、120和200 r/min的洗脱量间差异不显著;单次洗脱量随洗脱次数的增加而降低,累计洗脱量则逐渐增大。综上所述,氯丹、灭蚁灵污染场地土壤鼠李糖脂洗脱的适宜工艺参数为鼠李糖浓度10 mmol/L,搅拌速度80 r/min,固液比1∶10,洗脱时间20 min,洗脱3次。     

Temperature-dependent sorption of polycyclic aromatic hydrocarbons on natural and treated sediments

In aqueous environment temperature is considered to play a significant role in the sorption process of polycyclic aromatic hydrocarbons (PAHs) and its influence on the sorption equilibrium is indicative of sorption energies and mechanisms. In this study, sorptions of five PAHs on three heterogeneous sorbents including one river sediment (YHR), one estuary sediment (YRD) and one treated sediment with organic matter removed (IM) were carried out at a range of temperature from 5 °C to 35 °C. Stronger sorptions were observed at lower temperatures, with the equilibrium sorption coefficient K_d increasing 2-5 times as the temperature decreases 30 °C. The increase of K_d value was attributed primarily to the change of PAH water solubility, which predicted 40-75% of the increase of K_d in the sorption process. To provide insight into the sorption mechanism, enthalpy change (ΔH_S) for the sorption process was calculated and the values were observed to be negative for all of the interactions, suggesting that the exothermal sorption of PAHs inversely dependents on temperature. Based on the values of ΔH_S, van der Waals forces were inferred as the main sorption mechanism for the PAHs, especially on the YHR sediment which contained more organic matter. For sorption of larger size PAHs on the sorbents with low organic matter, specific interactions were deduced to contribute to the overall sorption.     

The relationships between air pollutants, meteorological parameters and concentration of airborne fungal spores

Fungal spores are an important component of bioaerosol and also considered to act as indicator of the level of atmospheric bio-pollution. Therefore, better understanding of these phenomena demands a detailed survey of airborne particles.The objective of this study was to examine the dependence of two the most important allergenic taxa of airborne fungi - Alternaria and Cladosporium - on meteorological parameters and air pollutant concentrations during three consecutive years (2006-2008). This study is also an attempt to create artificial neural network (ANN) forecasting models useful in the prediction of aeroallergen abundance.There were statistically significant relationships between spore concentration and environmental parameters as well as pollutants, confirmed by the Spearman’s correlation rank analysis and high performance of the ANN models obtained. The concentrations of Cladosporium and Alternaria spores can be predicted with quite good accuracy from meteorological conditions and air pollution recorded three days earlier.     

The implementation of a measurement system for brushless DC motor parameters

Most of the energy conversion in industrial devices and equipment is completed by the motor. The acquirement of motor parameters becomes very important for designing the motor drives. The aim of this paper is to design and implement a motor measurement system. Through the processing of an Advanced RISC Machines (ARM) microcontroller, the various parameters of motors such as input voltage, input current, input power, motor speed, and motor torque can be obtained. Consequently, the torque constant, load torque, viscous friction, and the inertia of the motor are calculated and achieved. The motor parameters can be commanded and displayed in the designed human interface of a PC via USB communication. The hardware system designed in this system includes an ARM microcontroller, an inverter, a voltage sensor, a current sensor, a torque sensor, and power supply. The software programming is developed under the Visual Studio 2012 environment development platform using the C language. Finally, the prototype of the motor measurement system is completed and verified. The experimental results for the motor parameters and torque/speed characteristic are demonstrated and show the feasibility of the complete designed system.     

Reproductive parameters and disturbances of embryonic development in the fieldfare (<Emphasis Type="Italic">Turdus pilaris</Emphasis> L.) in the zone of impact from the nuclear fuel industry

The impact of emissions from the Siberian Chemical Plant (Tomsk oblast) on reproduction and embryonic development of the fieldfare was studied. Bird abundance, clutch size, and egg volume in the impact and background (control) zones were similar, but partial brood mortality in the impact zone proved to be significantly higher, and the frequency of embryonic pathologies (including developmental abnormalities) was also several times higher than in the control.     

贯通巷道风流流场数值模拟若干关键问题研究

根据计算流体力学基本理论,利用计算流体动力学(CFD)软件Fluent,运用三维k-ε湍流模型对贯通型巷道风流流场数值模拟中风流入口、出口位置对巷道风流流场分布的影响、湍动能k及湍动能耗散率ε的取值对模拟结果的影响等进行考察。通过研究确定模拟巷道的流体力学入口长度,确定模拟巷道出口位置;湍动能k及湍动能耗散率ε的取值对入口附近流动还没有充分发展区域拟解算的结果影响较大,而对流动充分发展的区域影响较小。将数值模拟风速值与理论计算风速值进行对比,模拟结果与计算结果非常一致,验证了数值模拟方法的正确性,为研究贯通型巷道风流传质过程、瓦斯运移规律及通风排污效率等提供了理论基础。     

可旋转径向式微粒捕集器消声特性影响因素灰色关联分析

为降低可旋转径向式微粒捕集器中的排气噪声,采用有限元法建立可旋转径向式微粒捕集器声学特性模型,分析得到了其消声特性和传递损失曲线,并采用灰色关联分析方法研究可旋转径向式微粒捕集器结构参数对消声特性的影响程度。结果表明,可旋转径向式微粒捕集器具有降噪能力,且对高频噪声消声效果明显好于低频噪声,平均消声量为20 dB左右;直径比和扩张管锥角是影响可旋转径向式微粒捕集器消声特性的2个主要因素,适当选用小的直径比和扩张管锥角,有利于提高可旋转径向式微粒捕集器的消声性能。     

棉秆基活性炭的制备及其对2,4-二硝基苯酚的吸附

以棉秆为原料,以KOH为活化剂,制备了高比表面棉秆基生物质活性炭。分析了制得的活性炭的元素组成、表面官能团、吸附能力等物化性能,探讨了浸渍比,活化温度,活化时间等工艺参数对制备活性炭得率、表面官能团、碘值、亚甲基蓝值等性能的影响,并通过静态吸附实验比较了不同条件下制备活性炭对2,4-二硝基苯酚的吸附性能,探讨了典型炭样品对2,4-二硝基苯酚的等温吸附特性。结果表明,KOH活化棉秆基生物质活性炭的表面物化性质随浸渍比、活化温度等工艺参数变化而变化,活化适宜条件为浸渍比1：3、活化温度800℃、活化时间90 min,在此条件下制得的炭样的碘值为1 251 mg/g,亚甲基蓝吸附值为478 mg/g,分别是国家一级品标准的1.25倍与3.54倍;对2,4-二硝基苯酚的Langmuir最大吸附量为747 mg/g,与Freundlich模型相比,Langmuir模型能较好地描述2,4-二硝基苯酚在炭样上的吸附行为,表明制备活性炭样品表面吸附位的能量分布较为均一。