锚喷粉尘受力及产尘机理分析

通过对锚喷粉尘的受力分析,基于粉尘颗粒的基本性质,运用牛顿运动规律、流体力学的紊流射流、两相流等相关理论,对锚喷产尘原因及运动规律研究,认为锚喷尘源产生的4种方式: 粉尘颗粒自身的特性及二次风流的影响,高速喷射气流带动周围的空气运动所产生的剪切作用,锚喷高速射流内部中团粒间的相互作用以及物料与受喷面的碰撞是影响锚喷产生粉尘的主要原因.     

Seasonal and particle size-dependent variations in gas/particle partitioning of PCDD/Fs

This study monitored particle size-dependent variations in atmospheric polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Two gas/particle partitioning models, the subcooled liquid vapor pressure (P(L)(0)) and the octanol-air partition coefficient (K(OA)) model, were applied to each particle sizes. The regression coefficients of each fraction against the gas/particle partition coefficient (K(P)) were similar for separated particles within the same sample set but differed for particles collected during different periods. Gas/particle partitioning calculated from the integral of fractions was similar to that of size-segregated particles and previously measured bulk values. Despite the different behaviors and production mechanisms of atmospheric particles of different sizes, PCDD/F partitioning of each size range was controlled by meteorological conditions such as atmospheric temperature, O(3) and UV, which reflects no source related with certain particle size ranges but mixed urban sources within this city. Our observations emphasize that when assessing environmental and health effects, the movement of PCDD/Fs in air should be considered in conjunction with particle size in addition to the bulk aerosol.     

Particle fluxes above forests: observations, methodological considerations and method comparisons

This paper reports a study designed to test, evaluate and compare micro-meteorological methods for determining the particle number flux above forest canopies. Half-hour average particle number fluxes above a representative broad-leaved forest in Denmark derived using eddy covariance range from -7x10(7) m(-2) s(-1) (1st percentile) to 5x10(7) m(-2) s(-1) (99th percentile), and have a median value of -1.6x10(6) m(-2) s(-1). The statistical uncertainties associated with the particle number flux estimates are larger than those for momentum fluxes and imply that in this data set approximately half of the particle number fluxes are not statistically different to zero. Particle number fluxes from relaxed eddy accumulation (REA) and eddy covariance are highly correlated and of almost identical magnitude. Flux estimates from the co-spectral and dissipation methods are also correlated with those from eddy covariance but exhibit higher absolute magnitude of fluxes.     

Assessment of the phytoextraction potential of high biomass crop plants

A hydroponic screening method was used to identify high biomass crop plants with the ability to accumulate metals. Highest values of shoot accumulation were found in maize cv. Ranchero, rapeseed cv. Karat, and cardoon cv. Peralta for Pb (18 753 mg kg(-1)), Zn (10 916 mg kg(-1)), and Cd (242 mg kg(-1)), respectively. Subsequently, we tested the potential of these three cultivars for the phytoextraction of a metal spiked compost, finding out that, in cardoon and maize plants, increasing Zn and Cd concentrations led to lower values of root and shoot DW. By contrast, rapeseed shoot growth was not significantly affected by Cd concentration. Finally, a metal polluted soil was used to check these cultivars' phytoextraction capacity. Although the soil was phytotoxic enough to prevent the growth of cardoon and rapeseed plants, maize plants phytoextracted 3.7 mg Zn pot(-1). We concluded that the phytoextraction performance of cultivars varies depending on the screening method used.     

Use of USLE/GIS Methodology for Predicting Soil Loss in a Semiarid Agricultural Watershed

The Universal Soil Loss Equation (USLE) is an erosion model to estimate average soil loss that would generally result from splash, sheet, and rill erosion from agricultural plots. Recently, use of USLE has been extended as a useful tool predicting soil losses and planning control practices in agricultural watersheds by the effective integration of the GIS-based procedures to estimate the factor values in a grid cell basis. This study was performed in the Kazan Watershed located in the central Anatolia, Turkey, to predict soil erosion risk by the USLE/GIS methodology for planning conservation measures in the site. Rain erosivity (R), soil erodibility (K), and cover management factor (C) values of the model were calculated from erosivity map, soil map, and land use map of Turkey, respectively. R values were site-specifically corrected using DEM and climatic data. The topographical and hydrological effects on the soil loss were characterized by LS factor evaluated by the flow accumulation tool using DEM and watershed delineation techniques. From resulting soil loss map of the watershed, the magnitude of the soil erosion was estimated in terms of the different soil units and land uses and the most erosion-prone areas where irreversible soil losses occurred were reasonably located in the Kazan watershed. This could be very useful for deciding restoration practices to control the soil erosion of the sites to be severely influenced.     

蜡烛燃烧产生的亚微米颗粒物的数量排放因子

蜡烛燃烧产生的亚微米颗粒物(在10nm-500nm范围内),稳定燃烧排放的颗粒物呈单峰正态分布,而非稳定燃烧呈近似双峰正态分布.将现场测得的浓度数据通过气溶胶动力方程转化为排放因子.结果表明,蜡烛燃烧产生的颗粒物在经过一段时间历程后,粒径谱会发生较大的变化,纳米级颗粒物逐渐消失,颗粒物的粒径有所增大.蜡烛在稳定燃烧环境下产生的亚微米颗粒物的数量排放因子为4.05×1012±0.73×1012个·g-1,在非稳定燃烧下的排放因子为1.49×1012±0.32×1012个·g-1.     

近地面大气颗粒物粒度与粒形特征

选择大气颗粒物污染代表性城市石家庄市,利用挂片法采集采暖期与非采暖期大气颗粒物样品,在CIS-50粒度粒形仪上进行视频通道测试,并利用扫描电镜对颗粒表面形态进行观察,得出颗粒物粒度分布、粒形参数及形貌特征.结果显示,大气颗粒物粒度分布为连续多峰曲线形态,粒径范围为0.8～120 μm,集中于10 μm以下,粒度均值变化为4.086 0～7.622 7 μm,标准差随粒度均值增大而增大;粒形参数中形状因子均值变化为0.718 3～0.899 3,分维度均值变化为1.041 1～1.072 0.上述数据均呈现在非采暖期间小于采暖期间的特征.扫描电镜观察表明大气颗粒物多为表面粗糙的块状形貌,粒度较大;团聚状次之,并呈粗、细2种团聚形态;球体颗粒粒度最小.分析认为,石家庄市近地面大气颗粒物粒度粒形变化受地面排放影响强烈,采暖期新增颗粒物粒度为5～8 μm,粒形为近圆形及圆形,呈聚合体形态;PM₅数量比与近方形及正方形颗粒数量比呈较好正相关,r 为0.945 8,与近圆形及圆形颗粒数量比呈负相关,r 为-0.972 6,PM₅在大气颗粒物粒度粒形变化中可能有重要影响.     

图象法确定底泥颗粒物的表面分形维数(Ds)

研究了不同标度下底泥颗粒物的表面分形特征.结果表明,底泥颗粒的表面在几个nm到几个μm之间一般都具有多重分形特征,而且在不同的标度范围内表面分形维数(Ds)具有一定的差异,在100-102量级之间,随图象分辨率的增大,相应的Ds一般呈变小的趋势.SEM图象计算出的Ds为2.32-2.42,AFM图象计算出的Ds为2.00-2.46,它们是是纯粹几何意义上的表面粗糙特征的描述.     

Oxidative properties of ambient PM2.5 and elemental composition: Heterogeneous associations in 19 European cities

We assessed the extent to which constituents of PM_2.5 (transition metals, sodium, chloride) contribute to the ability to generate hydroxyl radicals (OH) in vitro in PM_2.5 sampled at 20 locations in 19 European centres participating in the European Community Respiratory Health Survey. PM_2.5 samples (n = 716) were collected on filters over one year and the oxidative activity of particle suspensions obtained from these filters was then assessed by measuring their ability to generate OH in the presence of hydrogen peroxide. Associations between OH formation and the studied PM constituents were heterogeneous. The total explained variance ranged from 85% in Norwich to only 6% in Albacete. Among the 20 centres, 15 showed positive correlations between one or more of the measured transition metals (copper, iron, manganese, lead, vanadium and titanium) and OH formation. In 9 of 20 centres OH formation was negatively associated with chloride, and in 3 centres with sodium. Across 19 European cities, elements which explained the largest variations in OH formation were chloride, iron and sodium.     

垃圾填埋场微生物气溶胶粒径分布研究

为了了解垃圾填埋场微生物气溶胶粒径分布规律,在北京市某垃圾卫生填埋场填埋区、渗滤液处理区、生活区分别选定监测点,利用安德森六级微生物采样器,对填埋场空气微生物进行了系统的定点取样、测定和分析。研究结果表明,空气细菌粒径分布均为第Ⅰ级(>8.2 μm)最高,填埋区空气细菌粒径呈偏态分布,渗滤液处理区、生活区分别在第Ⅳ级和第Ⅲ级出现第2个峰值。携带细菌的可吸入微粒在渗滤液处理区比例最大。空气真菌与放线菌均在第Ⅳ级分布最高,携带真菌和放线菌的可吸入粒子的比例显著大于细菌(P<0.05)。填埋区不同作业时段空气微生物粒径在各级分布比例基本一致。填埋区细菌气溶胶中值直径为5.7 μm,渗滤液处理区为3.7 μm,生活区为5.3 μm,显著大于真菌气溶胶和放线菌气溶胶的中值直径(P<0.05)。