火箭测试平台多通道脉动压力的同步采集与数据回收

目的实现火箭测试平台多通道脉动压力的同步采集与数据回收。方法在多时钟的采样系统内,采用统一的同步触发信号作为各通道的采样使能,实现40通道脉动压力的同步采集。采用"采存分离"的设计方法将存储电路从采样系统中分离,仅对存储电路进行抗冲击防护,通过火炮试验考核抗冲击性,通过回收存储电路实现数据回收。结果 40通道的采样同步精度被控制在了5个时钟周期内。存储体通过1000 m/s以上的冲击速度考核,数据全部回收。结论多时钟采样系统采用统一的同步触发信号可有效保证采样的同步性。在飞行载体弹舱空间受限的情况下,"采存分离"的方式可以在不增加体积和质量的前提下,极大增强数据记忆体的抗冲击能力,提高数据回收概率。     

Proposing an information criterion for individual-based models developed in a pattern-oriented modelling framework

Individual-based models (IBMs) have been improved in quality and reliability in recent years with an approach called pattern-oriented modelling (POM). POM proposes guidelines to develop models reproducing multiple patterns observed on the field and to test systematically how well the IBMs reproduce them. POM studies used generally traditional methods of goodness of fit such as the sum of squares evaluation or ad hoc comparisons of fitting errors and variations. Model selection, however, can be a rigorous statistical approach based on information theory and information criteria such as the Akaike's information criterion (AIC) or the deviance information criterion (DIC). So far, it has not been tried to link POM to these rigorous techniques. The main problems to achieve that are: (a) the difficulty to have likelihood functions for IBMs’ parameters and (b) the possibility to obtain posterior distributions of IBMs’ parameters given the patterns to reproduce. In a first part, this paper answers problem (a) by proposing and explaining how to calculate a deviance measure (POMDEV) for models developed in a context of POM. And while answering the second problem, a second part of the paper proposes an information criterion for model selection in a POM context (the pattern-oriented modelling information criterion: POMIC). This criterion does not yet have the same theoretical foundation as, e.g., AIC, but uses formal analogies to the DIC. In a third part POMIC is tested with a modelling exercise. This exercise shows the potential of POMIC to use multiple patterns for selecting among multiple potential submodels and eventually select the most parsimonious and well fitting model version. We conclude that POMIC, although being a heuristically derived approach, can greatly improve the POM framework.     

SAMPLING FRAME FOR IMPROVING PEBBLE COUNT ACCURACY IN COARSE GRAVEL‐BED STREAMS1

ABSTRACT: Improved sampling techniques are needed to increase the accuracy of pebble‐count particle‐size distributions used for stream studies in gravel‐bed streams. However, pebble counts are prone to operator errors introduced through subjective particle selection, serial correlation, and inaccurate particle‐size measurements. Errors in particle‐size measurements can be minimized by using a gravel template. Operator influence on particle selection can be minimized by using a sampling frame, 60 by 60 cm, in which sampling points are identified by the cross points of thin elastic bands. Serial correlation can be minimized by adjusting the spacing between the cross points and setting it equal to the dominant large particle size (=D₉₅). In a field test in a cobble‐bed stream, the sampling frame developed in this study produced slightly coarser size distributions, particularly in the cobble range, than the traditional heel‐to‐toe walk that selects particles with a blind touch at the tip of the boot. The sampling frame produced more similar sampling results between two operators than heel‐to‐toe walks. The difference between the two sampling methods is attributed to an unbiased selection of fine and coarse particles when using the sampling frame.     

AN EMPIRICALLY‐BASED SEQUENTIAL GROUND WATER MONITORING NETWORK DESIGN PROCEDURE1

ABSTRACT: A procedure using a simple, empirically‐based model that makes efficient use of available information has been developed for designing a ground water monitoring well network. A moving plume is described by siting wells in a sequential manner, relying upon two‐dimensional concentration data obtained from previously installed wells to determine the locations of future wells. Data sets from two well known, densely monitored natural gradient tracer studies were used to test the procedure. Plumes defined by all information in the original networks were compared to those defined by reduced networks designed by the new procedure. The new procedure tracked the plumes using only a portion of that information. The new procedure could have reduced the number of wells in the original tests by about 50 percent without appreciable loss of plume information as measured by plume location and extent and by tracer mass.     

低空分层降水和云水同步釆集系统的开发和应用

笔者自行开发并研制了低空(＜1 km)分层降水和云水采集系统,该系统成功地应用于福建省厦门市和贵州省贵阳市酸性降水来源和成因的研究中,取得了显著的成果,为探讨酸性降水来源和成因提供了有效的技术手段和支持。该系统可以在一定程度上代替航空测量,目前国内外的类似研究中没有使用该系统进行样品采集的先例,因此该系统的开发填补了国内外相关研究领域的空白。      

大气气溶胶中有机成分研究进展

有机物是大气气溶胶的重要组成部分,尤其是在细颗粒中,可占其干重的10%～70%。由于有机气溶胶的健康及气候效应,有机物的组成、源分布、颗粒行为等的研究越来越受到人们的重视。其中,有机物成分的鉴别和定量已成为近年来的研究热点。在分析中,就目前有机气溶胶的采样、有机成分提取、分离及定性、定量分析方法进行了综述,并比较了各种方法的优缺点。     

泽泻(Alisma orientale)对全氟化合物的吸收和传输特征-浓度的影响

为探究泽泻(Alisma orientale)对不同浓度全氟化合物(PFASs)的吸收、积累和传输特征,进行了为期3周的水培实验,全氟辛酸和全氟辛烷磺酸的暴露浓度分别为0、5、10、50、100、200、500和1 000μg·L~(-1).结果表明:随着PFASs浓度的增加,根系电导率、根茎中Cu含量、茎叶中Ca含量均降低,但泽泻生长状况良好;植物对PFASs的去除量不断增加(0. 87～116. 50μg),去除率却不断降低(20. 1%～2. 9%).根、茎和叶中PFASs的浓度随着PFASs浓度的增加呈线性增加,且符合Langmuir吸附等温式和Michaelis-menten方程,表明泽泻通过被动扩散的方式吸收PFASs.计算PFOA和PFOS的根、茎和蒸腾流富集系数(RCF、SCF、TSCF),并用限制分配模型对RCF和SCF值进行拟合,发现RCF、SCF、TSCF和限制分配模型准平衡分配系数αpt均随着PFASs浓度的增加而降低,这是由于随着PFASs浓度的增加,达到平衡所需要的水分量增加,达到平衡的时间也变长.     

Effect of housing geometry on the performance of Chemcatcher passive sampler for the monitoring of hydrophobic organic pollutants in water

Passive sampling of pollutants in water has been gaining acceptance for environmental monitoring. Previously, an integrative passive sampler (the Chemcatcher) was developed and calibrated for the measurement of time weighted average concentrations of hydrophobic pollutants in water. Effects of physicochemical properties and environmental variables (water temperature and turbulence) on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water have been published. In this study, the effect of modification in sampler housing geometry on these calibration parameters was studied. The results obtained for polycyclic aromatic hydrocarbons show that reducing the depth of the cavity in the sampler body geometry increased the exchange kinetics by approximately twofold, whilst having no effect on the correlation between the uptake and offload kinetics of analytes. The use of performance reference compounds thus avoids the need for extensive re-calibration when the sampler body geometry is modified.     

A directional passive air sampler for monitoring polycyclic aromatic hydrocarbons (PAHs) in air mass

A passive air sampler was developed for collecting polycyclic aromatic hydrocarbons (PAHs) in air mass from various directions. The airflow velocity within the sampler was assessed for its responses to ambient wind speed and direction. The sampler was examined for trapped particles, evaluated quantitatively for influence of airflow velocity and temperature on PAH uptake, examined for PAH uptake kinetics, calibrated against active sampling, and finally tested in the field. The airflow volume passing the sampler was linearly proportional to ambient wind speed and sensitive to wind direction. The uptake rate for an individual PAH was a function of airflow velocity, temperature and the octanol-air partitioning coefficient of the PAH. For all PAHs with more than two rings, the passive sampler operated in a linear uptake phase for three weeks. Different PAH concentrations were obtained in air masses from different directions in the field test.     

Evaluation of ogawa passive sampling devices as an alternative measurement method for the nitrogen dioxide annual standard in El Paso, Texas

Nitrogen Dioxide (NO₂) is a common urban air pollutant that results from the combustion of fossil fuels. It causes serious human health effects, is a precursor to the formation of ground level ozone, another serious air pollutant, and is one of the six criteria air pollutants established by the United States (U.S.) Clean Air Act (CAA). Ogawa Passive Sampling Devices (PSDs) for NO₂ were collocated and operated at six NO₂ Federal Reference Method (FRM) monitor locations in the El Paso, Texas area for the 2004 calendar year. Passive samples were taken at 2-week, 3-week, and 4-week intervals and compared against the continuously operating FRM monitors. Results showed that the collective NO₂ annual arithmetic mean for all passive monitors was identical to the NO₂ mean for all FRM monitors. Of the individual locations, three passive annual NO₂ means were identical to their corresponding FRM means, and three passive annual NO₂ means differed from their corresponding FRM means by only one part per billion (ppb). Linear correlation analysis between all readings of the individual NO₂ PSDs and FRM values showed an average absolute difference of 1.2 ppb with an r ² of 0.95. Paired comparison between high and low concentration annual NO₂ sites, seasonal considerations, and interlab quality control comparisons all showed excellent results. The ease of deployment, reliability, and the cost-savings that can be realized with NO₂ PSDs could make them an attractive alternative to FRM monitors for screening purposes, and even possibly an equivalent method for annual NO₂ monitoring. More tests of the Ogawa NO₂ PSD are recommended for different ecosystem and climate regimes.