福建省地级市人为源活性氮排放及其特征分析

在人口增长和快速城市化的背景下,活性氮排放对生态环境的影响日益加剧.为研究省级尺度活性氮排放规律,采用排放因子法建立2000、2005及2010年福建省人为源活性氮排放清单,分析各地市3个年份活性氮排放量及排放强度特征.结果表明,3个年份福建省活性氮排放总量分别为538.4、587.0和619.97 Gg,呈整体增加趋势.在9个地级市中,增速最快的为莆田市,而漳州市排放量有所下降.排放量最大的为漳州和泉州,排放量最小的为宁德与厦门.从排放来源看,90%以上的排放来自农田生态系统和畜禽养殖系统.能源活动贡献较小,但其排放增长最为显著.2010年,各地市单位面积活性氮排放强度呈"东南沿海高西北内陆低"的格局,最高为厦门市,最低为三明市;GDP和人口排放强度则呈"东南沿海低西北内陆高"的格局,最高为南平市,最低为厦门市.在分析各地市活性氮排放源特征的基础上,探讨了不同地区活性氮减排重点,研究结果可为福建省及下辖各地市活性氮减排提供科学依据.     

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.     

人为干扰对小兴安岭森林湿地土壤碳组分和酶活性的影响

以小兴安岭落叶林沼泽湿地为研究对象,对比研究皆伐地、火烧地和落叶松湿地土壤碳组分和酶活性.结果表明:(1)3种湿地类型土壤SOC含量表现为对照地显著高于皆伐地和火烧地(p0.05),在0~10 cm土层中皆伐地与对照地相比降低了58.38%,火烧地与对照地相比降低了61.96%.皆伐地与火烧地在不同土层的土壤中SOC含量差异不显著(p0.05);DOC含量对照地显著高于皆伐地和火烧地(p0.05).在0~10cm土层中火烧地DOC含量是皆伐地的1.99倍,两者差异不显著(p0.05);不同干扰方式对土壤MBC含量影响的差异主要表现在0~10 cm的土层土壤,对照地分别比皆伐地和火烧地高23.13%和95.79%(p0.05).在不同的土层中皆伐地MBC含量均大于火烧地,与SOC含量的变化趋势一致.(2)与对照地相比,皆伐地与火烧地0~10 cm土层的土壤蔗糖酶活性分别降低了45.59%和36.76%,脲酶活性显著降低了18.22%和55.69%(p0.05),蛋白酶活性降低了19.65%和17.34%,淀粉酶活性降低了6.29%和10.69%.土壤碳组分和酶活性在垂直方向上均表现为随着土层深度增加而减小.皆伐和火烧造成森林湿地土壤碳组分和酶活性降低.     

我国工业危险废物的来源、处理及监管对策与建议

通过大量环境统计数据的分析,对我国工业危险废物的产生、综合利用、处置和贮存,从行业来源、区域分布进行了分析和总结。结合我国工业危险废物企业自建设施和政府集中处理设施处理情况,对我国工业危险废物的处理和环保监管对策提出了若干建议。     

Ti/SnO_2-Sb阳极-空气阴极电催化降解染料废水

为解决电化学法处理高盐染料废水存在的能耗大、成本高等问题,分别采用溶胶-凝胶法和辊压法制备Ti/SnO_2-Sb阳极和空气阴极,构建了Ti/SnO_2-Sb阳极-空气阴极双极体系(TSSA-ADC)。甲基橙(MO)作为高盐染料废水的典型污染物,考察了电流强度、MO浓度、电解液浓度和初始p H对TSSA-ADC体系和TSSA单阳极体系降解MO的影响。结果表明:与TSSA单阳极体系相比,TSSA-ADC体系具有更好的抗有机负荷冲击、抗盐分冲击、抗酸碱波动能力,能够维护酸碱平衡防止硬度离子结垢。最佳反应条件为电流强度为0.030 A,电解液浓度为3%,MO浓度为100 mg/L,初始pH=6。以MO去除率达到98%为基准,TSSA-ADC体系比TSSA体系可节能74.26%。     

碳排放影响因子与碳足迹文献综述:基于研究方法视角

从研究方法的角度出发,对近年来国内外碳排放影响因子及碳足迹的相关研究进行文献综述。根据碳排放影响因子的研究方法—情景分析法、因素分解法中的指数分解法以及其他计量模型,介绍了国内外关于碳排放影响因子的研究现状,最后对方法进行归类和对比。根据碳足迹研究方法—投入产出法、生命周期评价法、IPCC法以及其他模型,分析了国内外关于碳足迹的研究进展。最后通过总结,对碳排放和碳足迹的未来研究方向进行了展望。     

污泥基生物炭对垃圾渗滤液的吸附性能研究

以城镇污水处理厂剩余污泥为原料制备生物炭,研究了其对垃圾渗滤液中污染物吸附性能,旨在探索市政污泥综合利用方法和"以废治废"的治理技术途径。结果表明:当生物炭投加量为20 g/L时,垃圾渗滤液的COD和TP去除效果最佳,去除率分别为36.76%和78.36%,NH_4~+-N去除率随生物炭投加量增加而增加;上述三者不同污染物去除的最佳反应接触时间分别为50 min、30 min和≥2 h;生物炭对重金属离子的吸附机理主要表现为离子交换作用。     

我国城镇化进程中碳排放影响因素的实证研究

利用1980—2013年间的城镇人口与碳排放数据,选取城镇化进程中影响碳排放的城镇化水平、城镇建设用地面积、第三产业增加值、人均可支配收入、城镇人均绿化面积等因素,实证分析了城镇化对我国碳排放的影响程度,并利用格兰杰夫因果关系与误差修正模型分析了二者的因果关系与时间效应。最后,从降低工业碳排放、加快低碳城镇化试点建设、推进低碳社区发展,促进新能源发展等方面提出了相关建议。     

碳素纤维在近岸海洋污染物磷酸盐、硅酸盐处理中的应用

对碳素纤维进行氧化改性,利用改性后的碳素纤维处理近岸污染海水,重点研究了改性碳素纤维对海水中活性磷酸盐和活性硅酸盐的吸附作用。考察了碳素纤维液相改性时间、碳素纤维投加量、活性磷酸盐初始浓度、活性硅酸盐初始浓度、吸附时间、海况、pH值等单因素对近岸海洋污染物磷酸盐、硅酸盐吸附效果的影响。研究结果表明:改性碳素纤维对硅酸盐的吸附效果较好,去除率可达70%,对活性磷酸盐的去除率为31%左右。通过正交实验确定改性碳素纤维材料修复模拟近岸海水的优化条件为:碳素纤维改性时间为1.5 h,投加量为0.01 g,硅酸盐初始浓度为3mg/L,磷酸盐初始浓度为20 mg/L,海况为3级,pH值为8,吸附时间为3 h。在此条件下,碳素纤维对磷酸盐的去除率可达31.06%,硅酸盐去除率可达70.88%。     

Mesoporous carbon nanomaterials induced pulmonary surfactant inhibition, cytotoxicity, inflammation and lung fibrosis

Environmental exposure and health risk upon engineered nanomaterials are increasingly concerned. The family of mesoporous carbon nanomaterials(MCNs) is a rising star in nanotechnology for multidisciplinary research with versatile applications in electronics,energy and gas storage, and biomedicine. Meanwhile, there is mounting concern on their environmental health risks due to the growing production and usage of MCNs. The lung is the primary site for particle invasion under environmental exposure to nanomaterials. Here, we studied the comprehensive toxicological profile of MCNs in the lung under the scenario of moderate environmental exposure. It was found that at a low concentration of 10 μg/mL MCNs induced biophysical inhibition of natural pulmonary surfactant. Moreover, MCNs at similar concentrations reduced viability of J774 A.1 macrophages and lung epithelial A549 cells.Incubating with nature pulmonary surfactant effectively reduced the cytotoxicity of MCNs.Regarding the pro-inflammatory responses, MCNs activated macrophages in vitro, and stimulated lung inflammation in mice after inhalation exposure, associated with lung fibrosis.Moreover, we found that the size of MCNs played a significant role in regulating cytotoxicity and pro-inflammatory potential of this nanomaterial. In general, larger MCNs induced more pronounced cytotoxic and pro-inflammatory effects than their smaller counterparts. Our results provided valuable information on the toxicological profile and environmental health risks of MCNs, and suggested that fine-tuning the size of MCNs could be a practical precautionary design strategy to increase safety and biocompatibility of this nanomaterial.