延边地区公路沿线边坡失稳试验分析

延边地区公路沿线分布着大量软岩，其岩性具有强膨胀性，致使这一地区公路边坡出现了多处滑坡现象。为了合理地处理这一工程地质问题，需要认真研究该种软岩的膨胀特性。选取滑坡体软岩为研究对象，定量分析了其自由膨胀率、无荷膨胀率和有荷膨胀率，并具体测定了其膨胀力，探讨了其膨胀率和膨胀力的变化规律，揭示了研究区软岩的膨胀特性，为公路建设中软岩边坡加固参数的选取提供了科学的依据。     

The potential of vehicle and road infrastructure interventions in fatal bicyclist accidents on Swedish roads—What can in-depth studies tell us?

Abstract

Objective: The objective of this article is to describe the characteristics of fatal crashes with bicyclists on Swedish roads in rural and urban areas and to investigate the potential of bicycle helmets and different vehicle and road infrastructure interventions to prevent them. The study has a comprehensive approach to provide road authorities and vehicle manufacturers with recommendations for future priorities.

Methods: The Swedish Transport Administration’s (STA) in-depth database of fatal crashes was used for case-by-case analysis of fatal cycling accidents (2006–2016) on rural (n?=?82) and urban (n?=?102) roads. The database consists of information from the police, medical journals, autopsy reports, accident analyses performed by STA, and witness statements. The potential of helmet use and various vehicle and road infrastructure safety interventions was determined retrospectively for each case by analyzing the chain of events leading to the fatality. The potential of vehicle safety countermeasures was analyzed based on prognoses on their implementation rates in the Swedish vehicle fleet.

Results: The most common accident scenario on rural roads was that the bicyclist was struck while cycling along the side of the road. On urban roads, the majority of accidents occurred in intersections. Most accidents involved a passenger car, but heavy trucks were also common, especially in urban areas. Most accidents occurred in daylight conditions (73%). Almost half (46%) of nonhelmeted bicyclists would have survived with a helmet. It was assessed that nearly 60% of the fatal accidents could be addressed by advanced vehicle safety technologies, especially autonomous emergency braking with the ability to detect bicyclists. With regard to interventions in the road infrastructure, separated paths for bicyclists and bicycle crossings with speed calming measures were found to have the greatest safety potential. Results indicated that 91% of fatally injured bicyclists could potentially be saved with known techniques. However, it will take a long time for such technologies to be widespread.

Conclusions: The majority of fatally injured bicyclists studied could potentially be saved with known techniques. A speedy implementation of important vehicle safety systems is recommended. A fast introduction of effective interventions in the road infrastructure is also necessary, preferably with a plan for prioritization.     

Case study of landfill leachate recirculation using small-diameter vertical wells

A case study of landfill liquids addition using small diameter (5 cm) vertical wells is reported. More than 25,000 m³ of leachate was added via 134 vertical wells installed 3 m, 12 m, and 18 m deep over five years in a landfill in Florida, US. Liquids addition performance (flow rate per unit screen length per unit liquid head) ranged from 5.6 × 10^?8 to 3.6 × 10^?6 m³ s^?1 per m screen length per m liquid head. The estimated radial hydraulic conductivity ranged from 3.5 × 10^?6 to 4.2 × 10^?4 m s^?1. The extent of lateral moisture movement ranged from 8 to 10 m based on the responses of moisture sensors installed around vertical well clusters, and surface seeps were found to limit the achievable liquids addition rates, despite the use of concrete collars under a pressurized liquids addition scenario. The average moisture content before (51 samples) and after (272 samples) the recirculation experiments were 23% (wet weight basis) and 45% (wet weight basis), respectively, and biochemical methane potential measurements of excavated waste indicated significant (p < 0.025) decomposition.     

流态对生物添加强化硝化效果的影响

在15℃、相同氮负荷和添加强度条件下运行SBR和CSTR以对比分析两种典型流态(推流式和完全混合式)对硝化菌添加强化硝化效果的影响.结果表明,添加期间,SBR中氨氧化速率(AUR)和亚硝酸盐氧化速率(NUR)分别为添加前的2.34和2.39倍,停止添加后又分别降为添加前的2.01和1.78倍;添加期间CSTR中AUR和NUR分别为添加前的2.63和2.44倍,停止添加后又分别降为添加前的1.48和1.31倍.荧光原位杂交结果显示,添加期间,SBR中氨氧化菌(AOB)和亚硝酸盐氧化菌(NOB)的个数百分比分别为添加前的2.67和2.71倍,添加停止后,又分别降至原来的2.14和1.95倍;CSTR中AOB和NOB分别为添加前的2.91和1.77倍,但在添加停止后CSTR中AOB和NOB分别降至添加前的1.25和1.50倍.因此,硝化菌添加期间,两种流态的添加效果接近,但是在添加停止后,由于流态对硝化菌中K-决策者(Nitrosospira、Nitrospira)和r-决策者(Nitrosomonas europaea、Nitrobacter)的选择作用,添加的硝化菌在完全混合式条件下比推流式条件下更容易被系统淘汰.     

典型城市污水中对羟基苯甲酸酯的污染特征

对羟基苯甲酸酯(parabens)作为防腐剂、防霉剂和杀菌剂等被广泛应用于食品、化妆品和药品中.近年来的研究表明,该类化合物能够在地表水体中检出,对水生生态环境存在潜在的危害.本研究于2016年秋季和冬季,对哈尔滨某典型城市污水处理厂进水进行了24 h连续采集,对6种parabens的质量浓度和4种常规水质指标进行了分析.结果表明,parabens普遍存在于城市污水中,对羟基苯甲酸甲酯、对羟基苯甲酸乙酯和对羟基苯甲酸丙酯是主要目标物,总有机碳、总溶解固体和酸碱度与parabens的浓度具有相关性;城市污水中parabens的质量浓度具有明显的日变化趋势,但是季节差异性不大.本研究结果为城市污水处理系统中parabens的深入研究和污染控制提供了重要理论依据.     

不同絮凝剂对活性污泥特性及除污效能的影响研究

为了研究絮凝剂对污泥特性及除污效能的作用结果,考察了SBR反应器中投加聚合氯化铝(PAC)、聚合硫酸铁(PFS)和阳离子聚丙烯酰胺(CPAM)对污泥特性及COD、NH_4~+-N和TP去除效果的影响。结果表明:投加10 mg/L PAC会导致活性污泥沉降性能变差,降低了微生物对污染物质的分解能力;投加0.1 mg/L CPAM和10 mg/L PFS能够改善活性污泥菌胶团和絮体结构,使得活性污泥的吸附效能和沉降性增强。     

中国村镇生活垃圾的养分与重金属含量特征及其农用潜力分析

对全国12个省份72个典型村镇进行了生活垃圾采样调查,系统分析了我国农村生活垃圾的基本理化特性、养分含量与重金属特征及其农用潜力。研究表明:我国典型村镇生活垃圾含水率为(53.68±8.84)%,p H为7.11±0.56,有机质含量为(49.04±10.49)%,C/N约为43∶1,C/P约为144∶1。除C/N略高外,其余特性均适合进行堆肥化处置。我国典型村镇生活垃圾中重金属As、Hg、Pb、Cd、Cr,Cu和Zn含量分别为(7.645±8.729),(0.737±0.480),(21.798±17.606),(3.356±11.012),(108.632±84.011),(36.834±10.905),(80.093±42.237)mg/kg。与国内相关标准相比,只有Hg、Cd超标,最大超标率分别为29.17%、43.75%;与欧美相关标准相比,仅有Cd、Cr超标,最大超标率分别为25.69%、37.50%。     

焙烧温度对CeO_2(ZrO_2)/TiO_2选择性催化脱硝性能的影响

采用溶胶-凝胶法并以不同温度焙烧制备一系列CeO_2(ZrO_2)/TiO_2(CZT)催化剂,考察了CZT催化剂固相结构、酸量、比表面积等性能与催化活性的关系。采用XRD、BET、NH3-TPD、H2-TPR以及XPS等表征技术对催化剂进行表征。结果表明:焙烧温度为450℃时CZT催化剂具有最高的催化活性,其在240~400℃的温度窗口内活性均高于90%,且具有较好的抗水和抗硫中毒能力。随着焙烧温度的提高,催化剂表面的Ce和Zr原子进入体相晶格且Ce0.5Zr0.5O2向Ce0.75Zr0.25O2转变,导致催化剂的储释氧能力和氧化还原性能降低。另外,锐钛矿和金红石型TiO_2晶粒尺寸的增加,催化剂的有效比表面积和总酸量降低,因此CZT催化活性随着焙烧温度的提高而有所降低。换言之,大的比表面积、良好的氧化还原性能、表面Ce4+的富集以及酸性位的增多均有利于NH3-SCR活性的提高。     

雷达海杂波统计特性建模研究

介绍了海杂波统计特性建模的幅度特性、多普勒谱及空间相关这三个方面的研究状况,对各种建模的思路和模型效果进行了对比总结。对于幅度均值已有多个较为成熟的模型,但适用范围不同,结果差异也很大。幅度分布建模重点解决拖尾问题,复合建模是趋势。除平均谱外,开始研究短时多普勒谱。空间相关性建模主要建立空间相关长度与雷达及海洋参数间的联系,但是研究还不够全面。总的来看,已由单纯经验建模发展为力图在机理研究指导下有一定物理意义的建模。尽管海杂波建模效果愈来愈接近实际,但建模依然存在诸多问题。     

厦门市大气PM_(2.5)中重金属污染特征及健康风险评价

用ICP-MS对厦门市夏冬两季城区和郊区PM_(2.5)(当量直径≤2.5 μm的颗粒物)及其中10种重金属(V、Cr、Mn、Co、Ni、Zn、As、Cd、Pb和Cu)含量进行测定,分析其污染特征,并对重金属的健康风险进行评价。结果表明,采样期间厦门市PM_(2.5)中重金属含量水平表现为ZnPbCuMnVAsNiCrCdCo,其中Zn、Pb、As、Cd和Cu富集因子远远大于10,受人为影响较严重。健康风险评价结果表明,PM_(2.5)中重金属的非致癌健康风险可以忽略;几乎所有重金属的致癌健康风险都高于最大可接受风险值10~(-6)。