Assessment of honey contamination with polycyclic aromatic hydrocarbons

The aim of this study was to assess honey contamination by polycyclic aromatic hydrocarbons. Six species of honey were examined, as well as rape blossom and soil from villages P?czerzyno and Przybys?aw in West Pomerania, Poland. The instrumental analysis was performed using a HP 6890 gas chromatograph coupled to a HP 5973 mass spectrometer with selected ion monitoring (SIM). Quantification was done by gas chromatography-mass spectrometry (GC-MS) using perdeuterated internal standards. Both soil samples showed high levels of all 23 PAHs, whereas honey contained mostly non-carcinogenic PAHs of low molecular weight. The most contaminated honey from P?czerzyno contained 0.24 μg kg-1 benzo[a]pyrene. Moreover, despite low contamination of honey, a positive correlation was found between PAH content in honey, blossom and soil.     

Factors influencing on the bioaccessibility of polybrominated diphenyl ethers in size-specific dust from air conditioner filters

Size-specific concentrations and bioaccessibility of polybrominated diphenyl ethers (PBDEs) in dust from air conditioner filters were measured, and the factors influencing the PBDE bioaccessibility were determined. Generally, the PBDE concentrations increased with decreasing dust particle size, and BDE209 (deca-BDE) was generally the predominant congener. The bioaccessibility ranged from 20.3% to 50.8% for tri- to hepta-BDEs, and from 5.1% to 13.9% for BDE209 in dust fractions of varied particle size. The bioaccessibility of most PBDE congeners decreased with increasing dust particle size. The way of being of PBDE (adsorbed to dust surface or incorporated into polymers) in dust significantly influenced the bioaccessibility. There was a significant negative correlation between the tri- to hepta-BDE bioaccessibility and organic matter (OM) contents in dust. Furthermore, tri- to hepta-BDE bioaccessibility increased with increasing polarity of OMs, while with decreasing aromaticity of OMs. The tri- to hepta-BDE bioaccessibility significantly positively correlated with the surface areas and pore volumes of dust. Using multiple linear regression analysis, it was found that the OM contents and pore volumes of dust were the most important factors to influence the tri- to hepta-BDE bioaccessibility and they could be used to estimate the bioaccessibility of tri- to hepta-BDEs according to the following equation: bioaccessibility (%) = 45.05 − 0.49 × OM% + 1.79 × pore volume. However, BDE209 bioaccessibility did not correlate to any of these factors.     

利用餐饮业废油脂制造生物柴油

世界的石油产量将会逐渐减少,石化柴油燃烧后所排放的废气是造成的城市空气污染的主要原因,生物柴油是石化柴油很好的替代能源,文章介绍了国外废油脂处理利用和甸餐饮业废油脂的概况,提出了利用餐饮业废油脂制造生物柴油的方法和工艺流程,并讨论了利用餐饮业废油脂制造生物柴油的几个问题。     

底泥中多环芳烃(PAHs)提取方法评析

总结了底泥中多环芳烃(PAHs)提取的处理流程和国内外多种提取方法,比较了几种在我国较为常用的提取方法的效率.同时还提出了PAHs分离纯化的方法和步骤,并指出了提取过程中影响实验回收率的几个因素.     

聚苯乙烯基硫代磺酸钾树脂的合成及其与卤代烃的反应

由聚苯乙烯基磺酰氯树脂与硫化氢钾反应制备聚苯乙烯基硫代磺酸钾树脂（Ｉ）,树脂Ｉ与亲电的卤代烃反应,生成聚苯乙烯基硫代磺酸酯树脂（Ⅱ）,树脂Ⅱ经过乙硫醇处理,使卤代烃结构部分以不对称二硫醚的形式游离下来,用ＧＣ／ＭＳ对其结构进行鉴定。从不对称二硫醚的结构可推导出原卤代烃的结构,所制备的聚苯乙烯基硫代磺酸钾树脂的转化效率为１．１１ｍｍｏｌ·ｇ＾－１。     

广州大学城珠江水域多环芳烃的污染特征

利用GC-MS对广州大学城珠江水域的地表水及表层沉积物中多环芳烃(PAHs)的含量进行了分析。结果表明,广州大学城珠江水域及表层沉积物中均可检出PAHs,水体优控PAHs总量在1061.7~6577.8ng/L之间,沉积物中优控PAHs总量分布在896.1~7248ng/g之间。广州大学城珠江水域的PAHs属混合来源,主要有石油类产品的输入(漏油泄油)和化石燃料的燃烧(大气沉降)。     

北京市昌平区大气环境PM10中多环芳烃的含量及变化趋势

通过采集了2004～2006年北京市昌平区四个季节中大气PM10样品,采用超声抽提方法,使用GC/MS分析了该区PAHs含量和组成.结果显示,三年中四个季度的18种PAHs总量范围分别为21.64～656.39ng/m3、31.94～164.33ng/m3和7.294～209.3ng/m3,其中致癌性极强的苯并[a]芘含量范围为2.69～36.95 ng/m3、1.44～6.6ng/m3和0.256～8.625ng/m1,其变化趋势与PAHs总量有较好的相关性.PAHs的浓度是冬季＞秋季＞夏季＞春季,这与夏季时雨水冲刷和阳光照射强度大导致PAHs光解,冬季时燃煤排放大等影响因素有关.文章还使用多种方法判断昌平区大气PM10中的PAHs主要来源于燃煤和汽车尾气,其它污染源贡献较小.     

云南曲靖某煤化工基地及周边土壤中多环芳烃的检测研究

采用快速溶剂提取处理土壤样品,利用气相色谱质谱内标法测定土壤中多环芳烃,其检出限范围为2.01~3.68μg/kg,相对标准偏差为2.6%~14.7%,加标回收率为67.1%~119%。结果表明,此方法具有良好的灵敏度、准确度和精密度。本研究对11个不同采样点土壤进行了检测分析,并考察了土壤中多环芳烃的污染水平。     

河流沉积物中有机污染物的分析研究进展

总结了近年来河流沉积物中有机污染物的研究进展 ,集中评述了国内有关沉积物中多环芳烃、有机氯农药和多氯联苯的分析研究现状 ,包括样品采集、样品前处理和样品分析 ,并对今后河流、湖泊及水库沉积物中污染物的分析工作作了展望     

GC-PID联用直接测定大气中痕量烃类化合物

作者把气相色谱仪(GC)与自行研制的光离子化检测器(PID)联用,实现了大气中痕量烃类化合物的直接测定,给出了仪器的构成和性能指标及测量结果.