气相色谱-高分辨双聚焦磁质谱测定水中超痕量多氯萘

采用固相萃取法处理水样,气相色谱-高分辨双聚焦磁质谱法测定水中超痕量多氯萘,同位素内标法定量,并对样品前处理条件和仪器条件进行优化。试验表明：方法在0．500 ng/L～500 ng/L范围内线性良好;当取样体积为1 L时,方法检出限为0．005 ng/L～0．01 ng/L;对实际水样进行2个质量浓度水平的加标回收试验,平行测定6次的 RSD为2．7％～8．7％,回收率为70．2％～110％。方法适用性试验表明,水样中复杂的基质对测定无影响。     

星形大分子液晶在气相色谱分析中的应用研究

将首次合成的偶氮苯硅氧烷类星形液晶大分子化合物用于毛细管柱气相色谱固定液 ,在其相转变温度附近具有良好的选择性 ,成功地分离了二甲酚异构体。     

SPE-HPLC法测定水中硝基苯酚类化合物

建立了以固相萃取为前处理条件,用液相色谱法测定水中10种硝基苯酚类化合物的分析方法。实验使用HLB(6 L/150 g)固相萃取柱富集水样中的目标化合物,二氯甲烷与乙酸乙酯体积比1:2的混合溶剂洗脱,采用Phenyl柱(4.6 mm×250 mm,5 μm)分离目标化合物,以乙腈(1%甲酸)/水(1%甲酸)为流动相进行梯度洗脱,二极管阵列检测器检测。10种硝基苯酚类物质在0.02~10 mg/L范围内呈现良好的线性。方法检出限为0.1~0.3 μg/L,水样加标相对标准偏差为5.19%~18.2%,平均加标回收率为49.8%~124%。该方法适用于水中10种硝基苯酚类化合物的测定。     

离子色谱法测废印刷电路板真空热解气相污染物中HBr、NO2和SO2

在淋洗液中加入H2O2和三乙醇胺配制成吸收液,通过离子色谱法同时测定废印刷电路板真空热解气相产物中HBr、NO_2和SO_2的含量,方法简单、快速、准确。当用50 m L吸收液、采样体积为30 L时,3种污染物的检出限分别为0.000 005 7、0.000 003 4、0.000 002 9 mg/L。该方法加标回收率为95.7%~104.8%,完全能满足废印刷电路板真空热解气相污染物中HBr、NO_2和SO_2的同时测定要求。利用该方法和行标方法同时测定环境空气中的HBr、NO_2和SO_2,再利用Excel分析工具对测定数据进行F检验和t检验,检验结果表明2种测定方法无显著差异。     

HPLC和HPLC-MS/MS测定地表水中酚类化合物

采用高效液相色谱法(HPLC)和高效液相色谱-三重四级杆质谱联用法(HPLC-MS/MS)测定地表水及饮用水中11种酚类化合物,通过优化测定条件,使HPLC法在0.020 mg/L~50.0 mg/L范围内,HPLC-MS/MS法在0.500μg/L~250μg/L范围内线性良好,方法检出限分别为0.005μg/L~0.031μg/L和0.005μg/L~1.56μg/L。未检出的实际样品加标回收率分别为57.2%~96.7%和81.3%~113%,RSD分别为1.5%~5.3%和3.9%~17.7%。     

固相萃取-GC/MS法测定水中持久性有机污染物

采用Envi-18固相萃取小柱富集水样,用正己烷/丙酮混合溶剂洗脱水样中42种POPs化合物,再用气质联用法测定。通过优化仪器监测条件,使目标物在0.250 mg/L~5.00 mg/L范围内线性良好。方法检出限为50.9 ng/L~11 640 ng/L,实际水样加标回收率为57.1%~129%,测定结果的RSD为0.1%~13.8%。将该方法用于测定浙江省东苕溪流域的45份水样,结果滴滴涕、六六六等有机氯农药的检出率较高,其他POPs的检出率较低。     

氨基化有机-无机杂化整体柱分离富集环境水中五价砷

将四乙氧基硅烷(TEOS)和N-(β-氨乙基)-γ-氨丙基三乙氧基硅烷(AEAPTES)作为共聚前体,采用在毛细管内原位聚合的方式制备得到氨基功能化的有机-无机杂化整体柱,将其作为针式固相微萃取(SPME)介质,建立了现场分离富集环境水中As(V)的SPME方法,优化了有机-无机杂化整体柱富集As(V)的实验条件,并研究了整体柱对As(V)的吸附/洗脱性能和富集能力,实现了环境水样中As(V)的高效、快速、高选择性检测。     

Mathematical Modeling of Column and Field Dense Nonaqueous Phase Liquid Tracer Tests

Mathematical models for the simulation of dense nonaqueous phase liquid tracer tests (DTTs) in laboratory columns and in the field are developed and examined. The DTT technique is a means of estimating the quantity of dense nonaqueous phase liquid (DNAPL) in a domain of interest in an aquifer. The two-dimensional field DTT model uses the Method of Principal Directions and an asymmetrical upwind algorithm for describing advective transport. Both models include diffusion transport of tracer into and from low-permeability porous structures such as clay lenses, as well as the mass transport kinetics of partitioning tracer to and from the DNAPL droplets. The dependence of the effluent tracer concentration curves on the parameters of the models is explored, and conclusions are drawn regarding the applicability of, and several possible problems with, the DTT technique. Model results indicate that the DTT performs well at locating distributed droplets of DNAPL, but is unlikely to be useful in the assessment of pooled DNAPL.     

碳包覆Pd/Al2O3催化剂催化4-溴苯酚加氢脱溴的活性和稳定性调控研究

在污染物液相催化加氢脱卤过程中,提高催化剂的稳定性至关重要.以水热合成法制备了不同碳包覆量的Pd/Al₂O₃@C催化剂,对催化剂进行了系列表征,并将催化剂应用于4-溴苯酚(4-BP)污染物的催化加氢脱溴反应.表征结果显示碳层提高了Pd/Al₂O₃的表面疏水性,有利于4-BP在催化剂上的吸附.并且在Pd/Al₂O₃@C催化剂的碳化过程中,碳还原部分Pd颗粒,并保留部分正价态Pd活性位,增强了4-BP中C-Br键的活化.与Pd/Al₂O₃相比,碳涂层提高了催化剂的催化活性.但当碳包覆量超过最佳包覆量后,暴露的Pd粒子随碳包覆量的增加而减少,导致活性下降.此外,碳层修饰后,催化剂的稳定性显著提高,从而大大抑制了Pd粒子的团聚和损耗.Pd/Al₂O₃@C表面的碳涂层对卤素具有较高的耐受性,从而减轻了液相催化加氢脱卤反应中活性中心的中毒.     

Solid‐phase extraction and GC analyses of select agricultural pesticides and metabolites in stream water

Abstract

The occurrence of agricultural pesticides in surface waters around the USA has created a concern over the status of safe drinking water. Solid‐phase extraction (SPE) or liquid‐liquid extraction (LLE) is usually employed to concentrate trace levels of pesticides in water samples to concentrations that are measurable with advanced chromatographic instruments. We describe here a SPE and capillary gas chromatographic (GC) procedure to extract and concentrate trace levels of select agricultural pesticides and metabolites from stream water. Our SPE and GC method provides high sensitivity, with recoveries between 85% to 95%, and high reproducibility for 9 of the pesticides studied. The described method provided marginal recoveries of 19 and 60% for the atrazine metabolites.