大孔强碱阴树脂去除饮用水中微量有机物

比较了大孔强碱阴树脂和颗粒活性炭在饮用水的深度处理中对有机物的去除效果。结果表明：(1)大孔强碱阴树脂的吸附容量比颗粒活性炭的大。在pH为8时,大孔强碱阴树脂对TOC的去除率最高。pH6～8时,对TOC的去除率没有明显的区别,而颗粒活性炭在pH为2时。对TOC的去除率最高;水温低能提高2种吸附材料的吸附容量。(2)在动态实验条件下。当流速相同,大孔强碱阴树脂的穿透时间明显比颗粒活性炭的长,大孔强碱阴树脂的制水量约是吸附床的10000倍。而颗粒活性炭却只有吸附床的4000倍。在饮用水的深度处理中,大孔强碱阴树脂可作为活性炭的最佳替代品。     

树脂相分光光度法测定水中痕量苦味酸

建立了树脂相分光光度法测定水中痕量苦味酸的新方法。该法灵敏度高,表观摩尔吸光系数为1.08×105L/(mol·cm);精密度理想(测定苦味酸质量浓度为5μg/mL的实验5次,相对标准偏差为1.0%);线性范围为0～7.0μg/mL;以3σ衡量,检出限为0.14μg/mL;加标回收率为97%～103%。采用该法直接测定水样中的苦味酸、间接测定烟草中的烟碱,结果令人满意。     

氨化松香基交联聚合树脂对水中诺氟沙星的吸附性能

将松香基功能高分子进行胺基化得到氨化松香基交联聚合树脂(aminated rosin-based resin,ARBR),采用扫描电镜(SEM)、红外光谱(FTIR)和比表面分析(BET)对ARBR进行了表征.利用ARBR树脂对水中诺氟沙星(NOR)吸附去除,系统研究了树脂投加量、pH值、接触时间、离子强度和温度等因素对NOR吸附性能的影响.结果表明,pH在2.0~6.0范围内,ABRA对NOR的去除效果随着溶液pH值的增加而升高,在8~10之间则呈现下降趋势;共存离子溶液的存在对ARBR去除NOR的行为总体上表现为促进作用.ARBR对水中诺氟沙星的吸附动力学过程符合准二级动力学模型.Langmuir等温吸附模型可较好地描述ARBR对水中NOR的吸附过程,理论最大吸附量为30.29 mg·g~(-1)(pH 6.0、20℃).吸附热力学分析表明,ARBR对水中诺氟沙星的吸附是自发吸热的过程,属于物理吸附,其吸附机制主要为氢键与静电作用.脱附再生实验发现,0.1 mol·L~(-1)HCl溶液效果明显优于其它脱附液,进一步确证了氢键在吸附中的主导作用;经过5次吸附-脱附循环后,对NOR仍具有稳定的吸附性能,可再生循环使用.对比了不同类型商品化树脂,ARBR具有较好的吸附效果.该研究结果拓展了松香高值化的应用研究领域,对开发松香在环境微污染控制中的应用具有理论指导意义.     

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.     

Capability of cation exchange technology to remove proven N-nitrosodimethylamine precursors

N-nitrosodimethylamine(NDMA) precursors consist of a positively charged dimethylamine group and a non-polar moiety, which inspired us to develop a targeted cation exchange technology to remove NDMA precursors. In this study, we tested the removal of two representative NDMA precursors, dimethylamine(DMA) and ranitidine(RNTD), by strong acidic cation exchange resin. The results showed that pH greatly affected the exchange efficiency, with high removal(DMA 78% and RNTD 94%) observed at pH pk_a-1 when the molar ratio of exchange capacity to precursor was 4. The exchange order was obtained as follows: Ca~(2+) Mg~(2+) RNTD~+ K~+ DMA~+ NH_4~+ Na~+. The partition coefficient of DMA~+to Na~+was 1.41 ± 0.26, while that of RNTD~+to Na~+was 12.1 ± 1.9. The pseudo second-order equation fitted the cation exchange kinetics well. Bivalent inorganic cations such as Ca~(2+)were found to have a notable effect on NA precursor removal in softening column test. Besides DMA and RNTD, cation exchange process also worked well for removing other 7 model NDMA precursors. Overall, NDMA precursor removal can be an added benefit of making use of cation exchange water softening processes.     

氯化磁性凹土树脂的制备与表征研究

利用表面负载的方法将有机化磁性凹土与苯乙烯、二乙烯苯等制备磁性凹土树脂;对磁性凹土树脂进行氯甲基化改性,制备出氯化磁性凹土树脂.表征了样品的形貌、结构以及表面积,研究了树脂对天然有机物(腐殖酸)的吸附性能.结果表明:氯化后的磁性凹土树脂的比表面积是原有的1.9倍,对附腐殖酸的饱和吸附能力也从原有的41.84 mg/g提高到了51.02 mg/g,这表明改性后的树脂增强了其对腐殖酸的去除能力.     

用AGMP-1M阴离子交换树脂直接分离Zn的实验方法改进

针对原有用于铜、铁、锌同位素分析的提纯步骤方法,我们专门对锌的提纯进行了改进,即在1mol/LHCl的介质条件下,采用200~400目AGMP-1M树脂提纯锌,大大简化了锌的提纯方法。在改进的实验条件下,地质样品的回收率接近100%;标准溶液在离子交换分离前后同位素组成一致,表明分离前后无Zn同位素分馏;全流程Zn的空白小于0.7ng/mL。此法可作为用于高精度Zn同位素分析的前处理方法。     

漆酶催化酚类、苯胺类化合物的动力学分析及其测定废水中邻苯二酚的应用研究

含酚、苯胺类废水是环境中水污染的重要来源之一.本研究以漆酶分析酚类及苯胺类底物的动力学特性为基础,建立酚类、苯胺类化合物的分析方法.以分光光度法测定漆酶催化0～10mg/L酚类及苯胺类底物的反应速率,作出底物浓度与反应速率的标准曲线,采用漆酶筛查并检测了3种焦化废水中非挥发酚类含量.结果表明,漆酶的酚类及苯胺类底物主要以多元酚、氨基酚及多元胺为主,其中酚类的最适pH在7.0左右,苯胺类在4.5～5.0之间,各底物Km值大小在0.4～10mmol/L之间.除联苯胺外,分光光度法所得到的标准曲线均具有较好的一级反应动力学线性关系,相关系数R2在0.96以上.3种焦化废水中邻苯二酚含量分别为190.5、265.8和155.3mg/L,回收率介于91.9%～115.8%之间.     

紫外辐射对小分子有机酸化学凝聚性作用途径探讨

通过烧杯实验系统考察了紫外辐射对脂肪羧酸类和酚酸类小分子有机酸的化学凝聚性的作用途径.结果表明,溶液pH对柠檬酸、草酸、酒石酸和丁二酸等脂肪羧酸类有机物的混凝性能影响较小.紫外辐射处理后,脂肪羧酸类小分子有机物的混凝去除率均高于未经紫外辐射处理的水样.进一步研究表明,紫外辐射过程中发生了光化学反应,使得脂肪羧酸的表面负电性降低,进而提高了其化学凝聚性.与脂肪类小分子有机酸不同,苯酚、水杨酸和苯甲酸的化学凝聚性较差,且受紫外辐射过程的影响小.单宁酸的混凝性能较好,pH=6时的去除率最高可达90%以上,这可能与其分子中脂肪酸碳链结构的存在以及单宁酸分子较大,易与PACl的水解产物发生吸附电中和反应有关.     

树脂基固态胺吸附剂室温下对低浓度CO2的吸附性能研究

以大孔甲基丙烯酸酯吸附树脂为载体,聚乙烯亚胺(PEI)为有机胺,采用液相浸渍法制备出固态胺吸附剂,并研究了其在室温下对低浓度CO2的吸附行为.同时,利用氮气吸附、热重分析和扫描电镜表征了材料的物理化学性质,并采用热重法和固定床吸附法考察了材料的CO2吸附性能.结果表明,大孔树脂担载50%PEI(质量分数)时吸附性能最佳,对纯CO2的最大吸附量为175 mg·g-1;CO2的吸附行为由扩散动力学与吸附热力学共同决定,低温有利于提高吸附容量;吸附剂对400 ppm~15%浓度的CO2都具有优异的动态吸附性能,其中对400 ppm CO2的吸附量达到86 mg·g-1,对15%CO2的吸附量达到150 mg·g-1;湿度对吸附起促进作用,相对湿度为10%时,对400 ppm CO2的吸附量提高至139mg·g-1;吸附剂具有优异的循环性能,具有直接空气捕集CO2的潜力.