全球液化石油气运输网络贸易社区特征及其演化分析

液化石油气在全球清洁能源消耗市场中扮演着极为重要的角色,其通过船舶在不同港口之间进行运输,而港口之间通过局部密集的运输关系,形成了联系极为紧密的贸易社区。采用复杂网络社区探测方法,基于2013—2017年全球液化石油气船舶轨迹大数据构建运输网络,并对其贸易社区特征及其演化趋势开展分析。结果表明：（1）液化石油气（Liquefied Petroleum Gas,LPG）贸易社区内的港口之间的联系更加紧密,不同社区内的枢纽港口联系也日益紧密;（2）各个贸易社区的规模呈现出增长趋势,且同一社区内的港口在地理空间上变得更为集聚;（3）亚太地区、中东、西北欧和地中海地区形成的社区在全球LPG贸易中一直保持着重要地位,而随着时间推移,美洲社区已逐渐从一个相对孤立的社区发展成为与其他社区存在紧密联系的社区。     

2006—2018年中国省级以上开发区的空间分布特征变化

以新的国土空间规划语境为背景,基于核密度估计、标准差椭圆法和分类统计对我国2006—2018年省级以上开发区的密度分布特征变化、发展重心轴向的变化和主体功能区视角下的分布变化做了分析。研究表明：该阶段我国省级以上开发区空间分布的东西差距得到一定缓解,仍存在东部连片集聚、西部据点集中的模式差异。开发区分布的总体重心已经向西北方向移动,发展轴向则由原来的南北轴向转向了东南—西北轴向。从主体功能区视角来看,开发区空间分布格局呈现出外围扩散与局部缩减的动态调整。开发区规模的增长主要集中在重点开发区域,缩减主要发生在生态功能区域。这些新变化将为我国国土空间土地利用优化和国土空间管控实践提供重要参考。     

深圳湾流域面源与截排溢流污染特征及其对水环境的影响

随着点源污染逐步得到有效控制,面源与截排溢流污染对水环境的胁迫日益突出。基于土地遥感数据、城市排水管网等资料,构建流域—海湾一体化水环境模型,探讨深圳湾流域面源与截排溢流污染特征及其对水环境的影响,研究表明：（1）雨季COD、NH₃-N和TP单位面积面源与截排溢流污染负荷分别为17.21 t/km²与10.21 t/km²、0.17 t/km²与0.69 t/km²、0.04 t/km²与0.07 t/km²;（2）面源与截排溢流污染时间上主要集中于大雨及以上等级降水较多的5月和8月,空间上主要分布在截排工程集中、下垫面面积较大且坡度较陡的深圳河、大沙河和新洲河流域;（3）面源与截排溢流水体COD、NH₃-N和TP浓度可达地表水V类标准的3.7倍、18.2倍和8.5倍;（4）雨季COD、NH₃-N和TP浓度高于旱季的区域分别超过深圳湾总面积的40%、60%和65%。     

大辽河沉积物中微塑料的污染特征

以大辽河为研究对象,选取8个典型区域的沉积物,采用密度浮选法,结合体视显微镜及μ-FTIR,进行大辽河沉积物中微塑料的组成及分布特征研究.结果表明,大辽河沉积物微塑料平均丰度为（66.67±79.93）个/kg;其中位于鞍山海城市的DL5丰度最高,为（193.33±172.43）个/kg,辽阳县柳壕镇的DL6丰度最低,为（20.00±34.64）个/kg;微塑料颜色以白色、黑色、黄色为主（83.75%）,形状以纤维、薄膜、碎片为主（91.25%）,粒径以（1000~2000）μm为主（33.75%）.通过红外光谱分析可得出,大辽河沉积物中薄膜类微塑料的主要成分是聚酰胺（PA）、聚丙烯（PP）和聚乙烯（PE）,碎片类的主要成分是聚乙烯（PE）和聚丙烯（PP）,泡沫类和颗粒类的主要成分是聚苯乙烯（PS）,纤维类的主要成分是人造丝（RY）及聚对苯二甲酸乙二醇酯（PET）.总体上,该研究区域沉积物中微塑料的丰度处于中等偏低水平.本研究可为我国淡水河流沉积物中微塑料的污染分布研究提供基础科学数据.     

红树林土壤解磷菌的分离鉴定及解磷特性

从罗源湾红树林根际土壤中分离解磷菌,筛选出洋葱伯克霍尔德菌（Burkholderia cepacia, NR 113645.1）和短小芽孢杆菌（Bacillus pumilus, NR 043242.1）,研究它们的解磷特性和动态解磷过程. HPLC结果表明, B. cepacia菌液上清中含葡萄糖酸、丙酮酸、乳酸、乙酸、丁二酸, 这些有机酸的产生导致磷酸盐溶解. B.pumilus菌液上清中仅检测到少量的葡萄糖酸, 因此该菌溶磷效果不佳. 在细菌动态溶磷过程中发现, 经B. cepacia菌处理的磷酸钙, 其X射线衍射（XRD）特征峰强度随时间的增长降低, 显微镜图像显示磷酸钙颗粒随时间增长变小, 甚至消失. 而经B.pumilus菌处理的结果表明, 在试验期间内磷酸钙峰强度和颗粒大小没有明显变化. 细菌产生有机酸是溶解磷酸盐的重要前提, 这是解决板结土壤中难溶性磷源转化为生物可利用磷源问题的关键.     

Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

Removal and desorption of chromium in synthetic effluent by a mixed culture in a bioreactor with a magnetic field

Two chromium removal experiments were performed in bioreactors with and without a magnetic field under the same conditions.The release of the chromium present in the biomass was tested in two experiments one with the initial pH of the medium and one with pH 4.0.The objective was to remove Cr(Ⅵ) and total Cr from the effluent,this was carried out by placing biological treatments of synthetic effluent contaminated with 100 mg/L of Cr(Ⅵ) in a bioreactor with neodymium magnets that applied a magnetic field(intensity85.4 mT) to the mixed culture.The removal of Cr(Ⅵ) was approximately 100.0% for the bioreactor with a magnetic field and 93,3% for the bioreactor without a magnetic field for9 hr of recirculation of the synthetic effluent by the bioreactor.The removal of total Cr was61.6% and 48.4%,with and without a magnetic field,respectively;for 24 hr.The desorption of Cr(VI) in the synthetic effluent was 0.05 mg/L,which is below the limit established by Brazilian legislation(0.1 mg/L) for the discharge of effluent containing Cr(Ⅵ) into bodies of water.The results obtained for the removal of chromium in synthetic effluent suggested that there was no significant influence on the viable cell count of the mixed culture.The desorption of Cr(Ⅵ) in synthetic effluent after bioadsorption of chromium by the mixed culture in the process of removal of chromium in bioreactors with and without a magnetic field was not significant in either of the experiments with different initial pHs.     

UV/H2O2 oxidation of tri(2-chloroethyl) phosphate: Intermediate products, degradation pathway and toxicity evaluation

Tri(2-chloroethyl) phosphate (TCEP) with the initial concentration of 5 mg/L was degraded by UV/H₂O₂ oxidation process. The removal rate of TCEP in the UV/H₂O₂ system was 89.1% with the production of Cl^? and PO₄^3? of 0.23 and 0.64 mg/L. The removal rate of total organic carbon of the reaction was 48.8% and the pH reached 3.3 after the reaction. The oxidative degradation process of TCEP in the UV/H₂O₂ system obeyed the first order kinetic reaction with the apparent rate constant of 0.0025 min^?1 (R²=0.9788). The intermediate products were isolated and identified by gas chromatography-mass spectrometer. The addition reaction of HO? and H₂O and the oxidation reaction with H₂O₂ were found during the degradation pathway of 5 mg/L TCEP in the UV/H₂O₂ system. For the first time, environment risk was estimated via the “ecological structure activity relationships” program and acute and chronic toxicity changes of intermediate products were pointed out. The luminescence inhibition rate of photobacterium was used to evaluate the acute toxicity of intermediate products. The results showed that the toxicity of the intermediate products increased with the increase of reaction time, which may be due to the production of chlorine compounds. Some measures should be introduced to the UV/H₂O₂ system to remove the highly toxic Cl-containing compounds, such as a nanofiltration or reverse osmosis unit.     

深圳市龙岗区大气颗粒物中多溴联苯醚的污染特征研究

为了解深圳市龙岗区大气颗粒物中多溴联苯醚的污染状况,于2017年1月、4月、8月和11月分别采集龙岗区大气颗粒物样品.利用气相色谱-质谱联用仪（GC/MS）对深圳市龙岗区4个功能区（工业区、商业区、居民区和生态区）的80个大气颗粒物样品进行检测,得到PBDEs（多溴联苯醚）8种单体（BDE-28、BDE-47、BDE-99、BDE-100、BDE-153、BDE-154、BDE-183、BDE-209）的质量浓度,同时研究了大气颗粒物中PBDEs质量浓度的时空分布特征.结果表明:①深圳市龙岗区大气颗粒物中ρ（∑₈PBDEs）（∑₈PBDEs为PBDEs 8种单体的加和）范围为0.07~77.80 pg/m3,ρ（∑₈PBDEs）年均值为（6.86±14.17）pg/m3.ρ（BDE-209）范围为0.01~76.23 pg/m3,年均值为（5.10±13.58）pg/m3,BDE-209为主要污染单体.② 4个功能区的ρ（∑₈PBDEs）平均值大小顺序依次为工业区（13.65 pg/m3）>商业区（7.75 pg/m3）>生态区（3.95 pg/m3）>居民区（2.19 pg/m3）,工业区是环境空气颗粒物中PBDEs的主要污染区.③ ρ（∑₈PBDEs）平均值的季节性变化规律为春季（13.32 pg/m3）>冬季（9.18 pg/m3）>秋季（2.17 pg/m3）>夏季（1.51 pg/m3）,符合深圳市亚热带海洋季风气温和气候对环境空气中颗粒物质量浓度的影响规律.研究显示,深圳市龙岗区大气颗粒物中PBDEs质量浓度处于较高水平,污染严重,建议减少含PBDEs产品的生产、使用和运输等活动,或找到更利于环境安全和人体健康的替代品,降低PBDEs对该地区的污染.      

废塑料再生过程废水中微塑料去除模拟试验

微塑料是一种存在于不同环境介质中的新兴污染物,主要来源于废弃塑料制品,其存在污染范围广、潜在环境污染大的问题.废塑料再生企业生产废水中微塑料浓度远高于其他类型废水,对其生产废水中的微塑料进行处理具有重要的环境意义.模拟废塑料再生过程的生产废水并进行微塑料去除的絮凝沉淀试验,研究絮凝剂投加量、pH、水力快速搅拌条件的单因素和正交试验对废水中微塑料去除率及其各因素作用的影响.结果表明:①当PAC (聚合氯化铝)投加量为10 mL,PAM (聚丙烯酰胺)投加量为7 mL,pH为9,水力快速搅拌条件为100 r/min下维持40 s再200 r/min下维持40 s时,微塑料的总去除率最高,达91%.②PAC投加量是影响微塑料去除效果的主要因素,其次是pH.③微塑料的去除率与其本身的密度有关,密度大的ABS (acrylonitrile butadiene styrene,丙烯腈-丁二烯-苯乙烯)去除率最高,密度小的PE (polyethylene,聚乙烯)去除率最低.④不同粒径区间的微塑料去除率区别较大,粒径小(0.1~0.25 mm)的微塑料去除效果最好.研究显示,通过控制PAC和PAM的投加量、pH和水力搅拌速率等条件,能够有效将废水中的微塑料通过絮凝沉淀的方法去除,从而达到净化含微塑料生产废水的目的.