Feasibility of honeycomb monolith supported sugar catalyst to produce biodiesel from palm fatty acid distillate (PFAD)

Carbon coated monolith was prepared by sucrose solution 65 wt.% via dip-coating method. Sulfonation of incomplete carbonized carbon coated monolith was carried out in order to synthesize solid acid catalyst. The textural structure characteristics of the solid acid catalyst demonstrated a low surface area and pore volume. Palm fatty acid distillate (PFAD), a by-product of palm oil refineries, was utilized as oil source in biodiesel production. The esterification reaction subjected to different reaction conditions was performed by using the sulfonated carbon coated monolith as heterogeneous catalyst. The sulfonation process had been performed by using vapour of concentrated H₂SO₄ that was much easier and efficient than liquid phase sulfonation. Total acidity value of carbon coated monolith was measured for unsulfonated sample (0.5 mmol/g) and sulfonated sample (4.2 mmol/g). The effect of methanol/oil ratio, catalyst amount and reaction time were examined. The maximum methyl ester content was 89% at the optimum condition, i.e. methanol/oil molar ratio (15:1), catalyst amount (2.5 wt.% with respect to PFAD), reaction time (240 min) and temperature 80 °C. The sugar catalyst supported on the honeycomb monolith showed comparable reactivity compared with the sugar catalyst powder. However, the catalyst reusability studies showed decrease in FFA% conversion from 95.3% to 68.8% after four cycles as well as the total acidity of catalyst dropped from the value 4.2 to 3.1 mmol/g during these cycles. This might be likely due to the leaching out of SO₃H group from the sulfonated carbon coated monolith surface. The leaching of active species reached a plateau state after fourth cycle.     

从自燃煤矸石中提取聚合铝铁(PAFC)的试验研究

采用盐酸酸浸的方法从自燃煤矸石中提取聚合铝铁，对煤矸石的粉碎粒径、酸浸盐酸的浓度及用量、酸浸的温度等工艺条件进行了试验研究。结果表明，从100g自燃煤矸石中，可提取19．85g固体聚合铝铁，成品的Al2O3含量33％、Fe2O3含量16％、盐基度70％。     

超细煤矸石矿粉作天然橡胶补强填充剂的性能研究

以煤矸石为原料，通过超细粉碎、表面改性等深度加工，制取了一种新的橡胶补强剂，并对煤矸石作补强剂影响因素进行初步的研究，实验表明它能够取代或部分取代炭黑用作天然橡胶的补强剂。     

Evaluation of the biodegradability of copolyesters containing aromatic compounds by investigations of model oligomers

Model oligo esters of terephthalic acid with 1,2-ethanediol, 1,3-propanediol, and 1,4-butanediol have been investigated with regard to their biodegradability in different biological environments. Well-characterized oligomers with weight-average molar masses of from 600 to 2600 g/mol exhibit biodegradation in aqueous systems, soil, and compost at 60°C. SEC investigations showed a fast biological degradation of the oligomer fraction consisting of 1 or 2 repeating units, independent of the diol component used for polycondensation, while polyester oligomers with degrees of polymerization higher than 2 were stable against microbial attack at room temperature in a time frame of 2 months. At 60°C in a compost environment chemical hydrolysis also degrades chains longer than two repeating units, resulting in enhanced degradability of the oligomers. Metabolization of the monomers and the dimers as well by the microorganisms could be confirmed by comparing SEC measurements and carbon balances in a Sturm test experiment. Based on these results degradation characteristics of potential oligomer intermediates resulting from a primary chain scission from copolyesters consisting of aromatic and aliphatic dicarbonic acids can be predicted depending on their composition. These results will have an evident influence on the evaluation of the biodegradability of commercially interesting copolyesters and lead to new ways of tailor-made designing of new biodegradable materials as well.     

Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.     

金沙江对硫酸的缓冲性能分析

本文分析了金沙江对硫酸的缓冲特征，建立了江水的缓冲曲线方程，并且验证了此方程的有效性，证明用此方程预测硫酸进入金沙江后江水pH值的变化情况，其预测准确度在0.2个pH单位内。     

浙江省酸雨的空间分布格局及其未来变化趋势预测

利用浙江省1992、2002年的酸雨监测数据,并利用RAINS-ASIA模型模拟了1990-2030年浙江省酸雨前体物(SO2)的排放量,以及酸沉降超临界负荷面积占研究区域面积比例的变化情况.结果表明,浙江省的酸雨分布范围不断扩大、危害程度不断加重;未来一个时期内,SO2排放量都会维持在较高的水平;酸沉降超临界负荷面积所占比例在经历较快的增长阶段之后,会维持在较为恒定的水平,并呈现出明显的时滞性.     

负载壳聚糖膨润土的制备及其吸附性能的影响

以天然膨润土和壳聚糖为原料,制得一种新型水处理剂——负载壳聚糖膨润土,研究了制备条件对酸性大红印染废水处理效果的影响。实验表明,当壳聚糖的浓度为30 g/L、膨润土质量与壳聚糖溶液体积之比为0.7、浸泡时间80 min、微烘时间15 min时,壳聚糖改性膨润土对酸性大红印染废水的脱色率可达97%。对改性土进行比表面积测定、电镜扫描及X-射线衍射等结构特性分析,证明壳聚糖的引入改变了膨润土在水中的分散状态,增强了其对污染物的吸附和离子交换能力。     

氯酚与富里酸的缔合作用

本文用超滤膜方法证实氯酚与富里酸之间存在缔合作用,并计算出表观缔合常数在２．７＊１０＾３－－１２１＊１０＾３ｍｌ．ｇ＾－１范围内。实验结果表明”ＰＨ、富里酸含量,氯酚取代氯原子个数都能够影响Ｋ值的大小。     

利用原生质体诱变技术筛选脱落酸高产菌株

以葡萄孢属TB-3菌株为出发菌株制备其原生质体．在纤维素酶浓度为20g／L,蜗牛酶浓度为3g／L的酶解系统中,25℃酶解3h,其原生质体制备数可达67×105mL-1,在KYM上的再生率为46．1％,在KPDA上的再生率为33．6％,经过3轮原生质体紫外线诱变后回复再生,及对大量再生突变株进行发酵筛选,获得高产稳定株TB－3H8,其发酵液中ABA的质量浓度可达1．4g／L