Comparison of quartz sand, anthracite, shale and biological ceramsite for adsorptive removal of phosphorus from aqueous solution

The choice of substrates with high phosphorus adsorption capacity is vital for sustainable phosphorus removal from waste water in constructed wetlands. In this study, four substrates were used： quartz sand, anthracite, shale and biological ceramsite. These substrate samples were characterized by X- ray diffractometry and scanning electron microscopy studies for their mineral components （chemical components） and surface characteristics. The dynamic experimental results revealed the following ranking order for total phosphorus （TP） removal efficiency： anthracite 〉 biological ceramsite 〉 shale 〉 quartz sand. The adsorptive removal capacities for TP using anthracite, biological ceramsite, shale and quartz sand were 85.87, 81.44, 59.65, and 55.98 mg/kg, respectively. Phosphorus desorption was also studied to analyze the substrates＇ adsorption efficiency in wastewater treatment as well as the substrates＇ ability to be reused for treatment. It was noted that the removal performance for the different forms of phosphorus was dependent on the nature of the substrate and the adsorption mechanism. A comparative analysis showed that the removal of particulate phosphorus was much easier using shale. Whereas anthracite had the highest soluble reactive phosphorus （SRP） adsorptive capacity, biological ceramsite had the highest dissolved organic phosphorus （DOP） removal capacity. Phosphorus removal by shale and biological ceramsite was mainly through chemical adsorption, precipitation or biological adsorption. On the other hand, phosphorus removal through physical adsorption （electrostatic attraction or ion exchange） was dominant in anthracite and quartz sand.     

Enhanced struvite recovery from wastewater using a novel cone-inserted fluidized bed reactor

The feasibility of struvite recovery at low （12.5 mg/L） and high （120 mg[L） phosphorus concentrations was studied by constructing a novel fluidized bed reactor with cones （FBRwc） and without cones （FBRwoc）. The crystallization process was continuously operated for 133 days under different hydraulic retention times （HRT = 1-10 hr）, pH （7.5-10）, and molar ratios of Mg/P （0.75-1.75）, N/P （1-10） and Ca/Mg （0-2）. The optimum operating conditions of HRT, pH, Mg/P and N/P molar ratios were found to be 2 hr, 9, 1.25, and 7.5, respectively. Under these optimum conditions, the phosphorus precipitation efficiencies of FBRwc were 93% for low and 98% for high phosphorus influent; however, the efficiencies were 78% and 81% for FBRwoc, respectively. Due to crystal losses at each junction （17%-31%）, the crystal recovery efficiency of FBRwoc was relatively low （47%-65%） for both influent concentrations. However, the losses were minimal in FBRwc, which showed 75% and 92% crystal recovery for low and high phosphorus concentrations, respectively. At low calcium concentration, crystal chemical analysis showed the product to be pure struvite （〉 99%）. The scanning electron microscope and X-ray diffraction results further confirmed that the crystal recovered from FBRwc contained pure struvite, which could be considered a high quality fertilizer. Except HRT, all parameters （pH, Mg/P, N/P and Ca/Mg） were found to be influencing factors for FBRwc performance. Overall, inserting cones in each part of the reactor played a significant role in enhancing struvite recovery from a wide range of phosphorus-containing wastewater.     

Phosphatase activity and culture conditions of the yeast Candida mycoderma sp. and analysis of organic phosphorus hydrolysis ability

Orthophosphate is an essential but limiting macronutrient for plant growth. About 67% cropland in China lacks sufficient phosphorus, especially that with red soil. Extensive soil phosphorus reserves exist in the form of organic phosphorus, which is unavailable for root uptake unless hydrolyzed by secretory acid phosphatases. Thus, many microorganisms with the ability to produce phosphatase have been exploited. In this work, the activity of an extracellular acid phosphatase and yeast biomass from Candida mycoderma was measured under different culture conditions, such as pH, temperature, and carbon source. A maximal phosphatase activity of 8.47 × 10^5±0.11× 10^5 U/g was achieved by C. Mycoderma in 36 hr under the optimal conditions. The extracellular acid phosphatase has high activity over a wide pH tolerance range from 2.5 to S.0 （optimum pH 3.5）. The effects of different phosphorus compounds on the acid phosphatase production were also studied. The presence of phytin, lecithin or calcium phosphate reduced the phosphatase activity and biomass yield significantly. In addition, the pH of the culture medium was reduced significantly by lecithin. The efficiency of the strain in releasing orthophosphate from organic phosphorus was studied in red soil （used in planting trees） and rice soil （originating as red soil）. The available phosphorus content was increased by 230% after inoculating 20 days in rice soil and decreased by 50% after inoculating 10 days in red soil. This work indicates that the yeast strain C. mycoderma has potential application for enhancing phosphorus utilization in plants that grow in rice soil.     

磷回收对厌氧/好氧交替式生物滤池蓄磷/除磷的影响

为能提高生物除磷系统的除磷/回收磷效率,研究采用厌氧/好氧交替式生物滤池(AABF)处理低碳磷比废水,观察利用周期性扩增进水碳源进行磷回收时,生物滤池除磷效率及生物膜内微生物特性的变化.通过分析生物滤池除磷效率变化,生物膜多聚物染色、扫描电镜(SEM)观察以及荧光原位杂交(FISH)技术分析生物滤池系统实施周期性磷回收对生物膜内微生物菌群形态与组成的影响.结果发现,生物滤池在先后经历3次生物蓄磷-磷回收(PB-PR)的运行操作过程中,生物滤池除磷效率分别由磷回收前的60.3%、82.9%、86.6%提高到磷回收后的87.2%、91.2%、93.5%;生物滤池生物膜内优势菌群形态逐渐由大球菌演变为小球菌、杆菌与丝状菌;经过连续3个周期的PB-PR操作,生物滤池底部生物膜中聚磷菌所占比例由43%提高至70%;聚磷菌群在生物膜内混合菌群中的比例随着上流式生物滤池高度的增加而不断提高.结果表明,采用周期性的碳源扩增与回收磷的操作,可以提高生物滤池除磷效率;引起生物滤池生物膜内微生物菌群形态与组成发生变化,促进聚磷菌成为优势菌群.     

池塘残饵对底泥氮、磷释放影响的模拟研究

运用室内静态模拟的方法,设置静态释放组(A组)和饲料添加组(B组),研究了池塘残饵分解对底泥氮、磷释放的影响.结果表明,A组DO高于B组(P<0.05),A组pH值为中性,B组pH值呈弱酸性.添加饲料后,B组硝态氮低于A组(P<0.05),而B组活性磷高于A组(P<0.05).实验第2~14 d,A组氨氮高于B组(P<0.05),此后B组氨氮升高,实验结束时B组氨氮高于A组(P<0.05).研究表明,添加饲料的B组,初期氨氮和硝态氮的释放都受到抑制.静态释放的A组,氮的释放变化是先上升,后降低的趋势,而饲料添加的B组,氮的释放变化趋势则是先降低,后升高.B组饲料分解向上覆水释放大量的磷,活性磷的变化呈现先上升后下降的趋势.     

自然光照对淹水条件下三峡库区消落带典型土壤磷释放影响

为研究淹水条件下光照对土-水界面磷释放的影响,以三峡库区消落带典型土壤为对象,通过室内自然光照试验,讨论了铁还原及有机质降解对磷释放的影响,分析光照对淹水土壤磷释放的影响机制.结果表明,光照对淹水土壤磷释放存在一定程度的抑制作用,光照作用下淹水紫色潮土上覆水体中TP浓度范围为0.018~0.033 mg·L-1,避光处理为0.02~0.057mg·L-1,灰棕紫泥光照下TP浓度范围为0.028~0.045 mg·L-1,避光处理为0.04~0.084 mg·L-1.光照引起淹水土壤中铁氧化物的变化可能是光照抑制磷释放的重要原因.光照导致土壤中铁氧化物饱和程度降低,铁还原和无定形铁生成受阻进一步加深了光照对磷释放的抑制影响.CO2和CH4反映淹水土壤有机质分解情况,光照降低有机碳的转化效率,加速土壤中无机电子受体的消耗,解释了光照作用下铁氧化物的变化.由此可见,光照对淹水土壤磷释放的抑制与淹水土壤中铁还原和有机质分解密切相关.     

沼液养殖钝顶螺旋藻的中试研究

在室外中试规模的跑道池中,使用混凝沉淀处理后的沼液养殖高耐污钝顶螺旋藻,研究了螺旋藻的生长情况以及沼液中氮磷的去除情况,计算了沼液中氮磷向螺旋藻体的转化效率.在此基础上,结合小试研究,分析总结了使用沼液室外规模化养殖螺旋藻过程中存在的问题和对策.以12 d为一个培养周期,总共进行了6批次培养试验,其中3批次培养的螺旋藻浓度能够达到采收要求(D560>0.8);而另外3批次未能收获螺旋藻.成功的3个养殖批次中,螺旋藻采收后沼液中COD、氨氮、总氮、总磷分别减少了28.6%~48.5%、30.4%~48.5%、41.8%~48.6%、14.3%~94.5%;其中去除的总氮和总磷向螺旋藻细胞的转化率分别为12.1%~98.5%和21.2%~83.7%.沼液中的高浓度氨氮以及残存虫卵孵化产生的虫害是导致另外3批次培养螺旋藻生长缓慢的主要因素,使用生物处理技术降低沼液中氨氮含量、使用膜过滤技术去除沼液中虫卵对于稳定获得高产率的螺旋藻非常必要.     

合肥城郊典型源头溪流不同渠道形态的氮磷滞留特征

为揭示源头溪流中深潭和曲折沟渠两种典型渠道形态的氮磷养分滞留特征,在合肥城郊二十埠河的某一级支流上,以NH4Cl和KH2PO4为添加营养盐,以NaCl为保守型示踪剂,开展现场示踪实验.在此基础上,利用OTIS模型软件、暂态存储参数和养分螺旋原理,解析深潭和曲折沟渠氮磷滞留特征.结果表明:1深潭的As值较曲折沟渠大,但其α值则较弯曲沟渠小1个数量级,而且As和α值随水文条件变化均不显著;2深潭中主渠道流动水体的NH+4-λ较其暂态存储区的NH+4-λs高2~3个数量级,曲折沟渠的NH+4-λ与NH+4-λs数值较为接近;3深潭中NH+4-Vf较SRP-Vf高1~2个数量级,而在曲折沟渠中,不仅NH+4-Vf与SRP-Vf数值较为相近,NH+4-Sw与SRP-Sw也基本相当;4深潭的NH+4-U较SRP-U高出2~3个数量级,曲折沟渠NH+4-U则较SRP-U高出1~2个数量级;5总的来说,在对NH+4和SRP滞留影响方面,深潭和曲折沟渠存在较大的差异性,且在深潭中NH+4的滞留效应显著超过SRP.     

垂直流人工湿地LDHs覆膜改性沸石基质强化除磷效果及其机制

采用碱性水热-共沉淀法,将6种金属化合物(CaCl2、ZnCl2、MgCl2、FeCl3、AlCl3、CoCl3)两两组合生成9种不同类型的层状双金属氢氧化物并覆膜于常用垂直流人工湿地沸石基质表面;利用分别填充原始沸石及9种LDHs覆膜改性沸石基质的模拟垂直流人工湿地小试系统进行除磷净化实验,并结合10种沸石基质的等温吸附实验结果,对LDHs覆膜改性沸石基质的强化除磷机制进行研究.结果表明,相对于原始沸石基质,9种不同组合方式生成的LDHs覆膜改性沸石基质除磷效果均有不同程度的提高;Zn2+参与合成的改性基质除磷效果优良,其中ZnFe-LDHs改性沸石基质对总磷、溶解性总磷及磷酸盐的平均去除率超过90%,其最大理论吸附量达到了原始沸石基质的3倍;LDHs覆膜改性沸石基质通过增加化学吸附容量、提高物理吸附能力达到强化除磷效果的目的.     

基于“径流-地类”参数的非点源氮磷负荷估算方法

东江作为广东省重要的饮用水源,其上游农业集水区非点源氮磷流失量备受关注.因此,本文以东江上游上莞河小流域为研究区,利用2011年的集水区水质监测数据,在平均浓度法及输出系数法的基础上,构建基于"径流-地类"参数的非点源氮磷负荷计算式,其径流、地类参数分别通过校正后的SCS模型和土地利用现状图获取,并分别对上莞河流域及流域各地类的非点源氮磷流失量进行估算.研究结果表明,汛期上莞河流域氮磷流失量主要来源于非点源污染,其非点源氮、磷流失量分别占氮、磷流失总量的97.32%、98.05%.坡度对流域非点源氮磷流失影响较小,地类是影响非点源氮磷输出的重要因素.构建的计算式能较好地估算非点源氮、磷负荷量,在次暴雨尺度非点源氮、磷输出量模拟精度分别为84.78%、81.06%.2011年度上莞河流域非点源氮、磷输出量分别为48923.4、7189.3 kg,耕地、居民地分别是非点源氮、磷输出的关键源区,其非点源氮、磷输出量分别占流域非点源氮、磷输出总量的84.20%、58.54%.