凝胶模板燃烧法制备纳米ZnO及其光催化性能

以硝酸锌为原料,明胶为模板分散剂,采用凝胶模板燃烧法制备纳米ZnO.利用TG-DTA,FT-IR,XRD,TEM和HPLC等手段对制备过程、样品的结构和性能进行了研究,探讨燃料及氧化剂的比例以及热处理温度的变化对产物粒径和光催化活性的影响.结果表明:产物粒子形状为球形,属六方晶系结构且无杂相.以染料罗丹明B溶液为目标降解物,1h的降解率为99.9%,最佳光催化剂的合成条件为:燃料与氧化剂的比例为0.84,400℃热处理3h.     

纳米铝粉对烟火药剂热安全性影响研究

为研究铝粉纳米化后对烟火药剂性能的影响,本文将普通铝粉和纳米铝粉分别与氯酸钾、硫粉按照零氧平衡的同一配比（17％AL＋63％KClO3＋20％S）配成的烟火药剂进行ARC热分析对比试验发现,含纳米铝粉的烟火药剂热分解的初始反应温度降低,反应到达最大温升速率所需的时间延长,反应所能达到的最高压力降低。这说明纳米铝粉的加入在加速其反应进程的同时,可有效地降低其反应的激烈程度和危险性,即铝粉纳米化后可以有效的改善烟火药剂的性能,提高其安全性。     

Photocatalytic remediation of γ-hexachlorocyclohexane contaminated soils using TiO2 and montmorillonite composite photocatalyst

TiO2 and montmorillonite composite photocatalysts were prepared and applied in degrading γ-hexachlorocyclohexane(γ-HCH)in soils.After being spiked with γ-HCH,soil samples loaded with the composite photocatalysts were exposed to UV-light irradiation.The results indicated that the photocatalytic activities of the composite photocatalysts varied with the content of TiO2 in the order of 10%＜70%＜50%＜30%.Moreover,the photocatalytic activity of the composite photocatalysts with TiO2 content 30% was higher than that of the pure P25 with the same mass of TiO2.The strong adsorption capacity of the composite photocatalysts and quantum size effect may contribute to its increased photocatalytic activities.In addition,effect of dosage of composite photocatalysts and soil pH on γ-HCH photodegradation was investigated. Pentachlorocyclohexene,trichlorocyclohexene,and dichlorobenzene were detected as photodegradation intermediates,which were gradually degraded with tlle phOtOdegradation evolution.     

基于行业增长的省级可再生能源规划目标分解

为了有效的把国家可再生能源规划分阶段的落实到各个省市,做好二者之间衔接工作,研究考虑了我国在从发展中国家过渡到中等发达国家时所需要考虑的如何平衡公平与效率之阀关系的问题,结合中国可再生能源发展实际特征,提出一种基于行业增长曲线的可再生能源阶段目标分解模型.模型首先求解出中国不同的可再生能源行业的增长曲线.然后给出可再生能源发展阶段目标函数.结合区域发展规划,给出了各省的阶段目标,为了验证该模型的正确性,以风电、水电和太阳发电为代表能源,结合国家可再生能源整体规划和资源需求分布状况,分阶段提出了各省域的可再生能源发展目标.目标分解参照两个原则(1)可分解原则.国家总量目标可以根据一定的标准在不同地区、部门和行业进行分解,由全社会共同完成发展目标.(2)公平性和区域差异的原则.考虑资源禀赋和社会经济发展水平差距,各地总量目标有所区别.研究对于可再生能源规划的整体实施和监管具有一定的借鉴意义.     

Effects of Smoke Emissions from a Charcoal Kiln on the Functioning of Forest Soil Systems: A Microcosm Study

Long-term charcoal production in small private charcoal kilns (CK) in Eastern Bieszczady Mts. (SE Poland) can cause local smoke contamination of the ambient forest environment. Responses of model soil systems, contaminated or not contaminated by CK smoke, to contrasting combinations of hydrothermic regimes were compared in laboratory microcosms (respiration of soil community, decomposition rate of soil organic matter and cotton stripes, herb seeds germination were studied). The majority of the obtained data show a markedly higher level of soil biological activity in the CK versus the control series. In some cases CK and control soil systems show different patterns of reactions to the tested combinations of microclimate regime. These phenomena should at least partly be attributed to the effects of CK pollution.     

纳米TiO2光催化降解有机磷农药的研究

通过实验,探讨了用纳米TiO2光催化处理有机磷农药模拟废水和实际应用的有机磷农药的可行性.实验表明,以测定不同时间PO43-的浓度来衡量有机磷的降解率,并以此来衡量有机磷农药及其中间产物降解的程度是合理的.光催化降解甲胺磷和水胺硫磷的结果,显示了有机磷农药的降解率与其结构有关.实际应用的有机磷农药也可用光催化降解.     

A new approach to spatial source apportionment of haze pollution in large scale and its application in China

Long-lasting expansion of haze pollution in China has already presented a stern challenge to regional joint prevention and control. There is an urgent need to enlarge and reconstruct the coverage of joint prevention and control of air pollution in key area. Air quality models can identify and quantify the regional contribution of haze pollution and its key components with the help of numerical simulation, but it is difficult to be applied to larger spatial scale due to the complexity of model parameters. The time series analysis can recognize the existence of spatial interaction of haze pollution between cities, but it has not yet been used to further identify the spatial sources of haze pollution in large scale. Using econometric framework of time series analysis, this paper developed a new approach to perform spatial source apportionment. We applied this approach to calculate the contribution from spatial sources of haze pollution in China, using the monitoring data of particulate matter (PM_2.5) across 161 Chinese cities. This approach overcame the limitation of numerical simulation that the model complexity increases at excess with the expansion of sample range, and could effectively deal with severe large-scale haze episodes.     

Zr掺杂TiO_2介孔材料光催化降解头孢氨苄

采用固相合成法制备了Zr掺杂TiO_2(Zr-TiO_2),运用XRD技术对其进行了表征,并将其用于水中头孢氨苄的光催化降解,通过单因素实验及正交实验优化了光催化反应条件。结果表明:制备的Zr-TiO_2为锐钛矿型介孔材料,孔径约为8.12 nm;各因素对头孢氨苄去除率的影响由大到小依次为光照时间、Zr-TiO_2投加量、初始头孢氨苄质量浓度;在Zr-TiO_2投加量为1.5 g/L、初始头孢氨苄质量浓度为10 mg/L、溶液pH为7.0、光照(300 W UV)时间为1.5 h的优化条件下,头孢氨苄去除率高达99.46%;Zr-TiO_2光催化剂的重复使用性能良好。     

纳米TiO2-石墨烯光催化剂的水热合成及其光催化性能

以钛酸四正丁酯和石墨为原料,通过水热法制备了锐钛矿型为主的纳米TiO2复合光催化剂（纳米TiO2-石墨烯）,并采用XRD,FTIR,FESEM,TEM技术对其进行了表征。通过紫外光照射降解溶液中的罗丹明B（RhB）研究了TiO2-石墨烯的光催化活性,分析了初始罗丹明B质量浓度、催化剂加入量、溶液pH和催化剂使用次数等影响降解效果的因素。实验结果表明：在初始RhB质量浓度为20 mg/L、溶液pH为7.10、催化剂加入量为1.000 g/L的条件下,紫外光照射30 min时,纳米TiO2-石墨烯对RhB的降解率高达98.69%,明显高于纳米TiO2的44.69%;纳米TiO2-石墨烯稳定性较强,可多次重复使用。     

TiO2-Cu2O/蒙脱土复合光催化剂的制备与性能

以钠基蒙脱土（MMT）为载体,先采用溶胶-凝胶法将纳米TiO₂引入到MMT层间,再采用化学沉积法将纳米Cu₂O负载在TiO₂/MMT上,制备出TiO₂-Cu₂O/MMT纳米复合光催化剂。采用XRD、SEM、紫外-可见漫反射技术对催化剂进行了表征。以甲基橙为目标污染物,考察了催化剂的光催化性能。表征结果显示：TiO₂与Cu₂O均匀分布在MMT的表面与片层孔隙中;TiO₂-Cu₂O/MMT结合了TiO₂和Cu₂O的特性,拓宽了催化剂的光吸收范围。实验结果表明,在光源为可见光、初始甲基橙质量浓度为20 mg/L、光催化剂加入量为2 g/L的条件下,TiO₂-Cu₂O/MMT纳米复合光催化剂对甲基橙的光催化降解效果明显优于单一负载的Cu₂O/MMT和TiO₂/MMT,大幅提高了催化剂的光催化效率,反应300 min时TiO₂-Cu₂O/MMT对甲基橙溶液的脱色率达到93%。